Skip to the content
2 layersDarlingV2, the printed circuit board in 3D

Small project just for fun with trying to develop a split keyboard that can handle both mech and tmr switches and all that wireless

Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
39
Pads
280
Tracks, vias
84, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Mar 2026
Updated
22 Mar 2026

Overview

DarlingV2 is an open-source printed circuit board by Anton0181, from the Anton0181/MagMechSplit repository on GitHub, published under the MIT licence. It is a 2-layer board with 56 parts on 39 nets, routed with 84 tracks and 0 vias.

Its parts include 28 diodes and 28 switches. It belongs with the keyboards and input boards of this library.

README

README.md

MagMechSplit

Small project just for fun with trying to develop a split keyboard that can handle both mech and tmr switches and all that wireless

Parts

56
QtyValueFootprintReferences
28DD_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +12
25SW_PushSW_Hotswap_Kailh_Choc_V1V2_1.00uSW1, SW2, SW10, SW11, SW12, SW13, SW15, SW16, SW17, SW18, SW19, SW20, SW22, SW23, SW24, SW25 +9
3SW_PushSW_Hotswap_Kailh_Choc_V1V2_1.25uSW7, SW14, SW21

More from Anton0181/MagMechSplit

3
  • 4 layers190.5 × 107.9 mmMyKeyboard, the printed circuit board in 3D

    MyKeyboard

    Anton0181/MagMechSplit

    Small project just for fun with trying to develop a split keyboard that can handle both mech and tmr switches and all that wireless

    208 partsMIT
  • 4 layers180 × 113 mmMagMechSplit nRF52840, the printed circuit board in 3D

    MagMechSplit nRF52840

    Anton0181/MagMechSplit

    Small project just for fun with trying to develop a split keyboard that can handle both mech and tmr switches and all that wireless

    178 partsMIT
  • 4 layers190.5 × 107.9 mmMyKeyboardV3, the printed circuit board in 3D

    MyKeyboardV3

    Anton0181/MagMechSplit

    Small project just for fun with trying to develop a split keyboard that can handle both mech and tmr switches and all that wireless

    95 partsMIT

Similar boards

  • 2 layers90 × 38 mmLCD OLinuXino-5TS Rev.B, the printed circuit board in 3D

    LCD OLinuXino-5TS Rev.B

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    56 parts1.5k
  • 2 layers50.4 × 48.4 mmDistortion, the printed circuit board in 3D

    Distortion

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    56 parts915
  • 2 layers27 × 24.7 mmKawaiiSD, the printed circuit board in 3D

    KawaiiSD

    mackieks/Kawaii

    Tiny, beautiful metal Wii keychain

    56 parts374
  • 2 layers123.9 × 94.4 mmRoba L, the printed circuit board in 3D

    Roba L

    kumamuk-git/roBa

    56 parts363GPL-3.0
  • 2 layers120.6 × 85.5 mmKLOTZ, the printed circuit board in 3D

    KLOTZ

    GEIGEIGEIST/KLOTZ

    KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.

    56 parts287GPL-3.0
  • 2 layers136 × 91.7 mmOne, the printed circuit board in 3D

    One

    ergonautkb/one

    Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.

    56 parts210CERN-OHL-P-2.0
  • 2 layers78.5 × 69 mmKicad cpu board, the printed circuit board in 3D

    Kicad cpu board

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    56 parts171
  • 2 layers45 × 45 mmAeroq Hardware v3, the printed circuit board in 3D

    Aeroq Hardware v3

    EnriqueNeyra/Aeroq

    An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54

    56 parts130

Questions

What parts does the DarlingV2 use?

56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DarlingV2 KiCad files?

From the Anton0181/MagMechSplit repository on GitHub, at the commit this page was made from: the board is DarlingV4/DarlingV2/DarlingV2.kicad_pcb and its schematic DarlingV4/DarlingV2/DarlingV2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DarlingV2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).