4 layers75 × 60 mm
8 layers118 × 100 mm
Kria k26-devboard
antmicro/kria-k26-devboard83Open source AMD Xilinx Kria UltraScale+ SoM baseboard
- Size
- 118 × 100 mm
- Copper layers
- 8
- Thickness
- 1.52 mm
- Parts
- 660
- Nets
- 804
- Pads
- 2,728
- Tracks, vias
- 20,447, 1,901
- Pours
- 298
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Aug 2022
- Updated
- 24 Jan 2025
Overview
Kria k26-devboard is an open-source printed circuit board by antmicro, from the antmicro/kria-k26-devboard repository on GitHub, published under the Apache-2.0 licence. It is an 8-layer board of 118 × 100 mm with 660 parts on 804 nets, routed with 20,447 tracks and 1,901 vias.
It is built around the 74AVC4T245RSVRG4, RT6236AHGQUF and TPD4E05U06QDQARQ1, with the LTC4358CDE#PBF, TPS2066TDGNRQ1 and TPS3840PH30DBVRQ1 among its other parts. Its parts include 251 capacitors, 164 resistors, 46 ICs, 24 diodes and 19 transistors. It belongs with the microcontroller boards and computers and single-board computers boards of this library.
Main components
12
74AVC4T245RSVRG4
UQFN-16(1.8x2.6)-40℃~+85℃ 1.2V~3.6V 12mA 12mA 16uA 2 2 74AVC Bidirectional Power-off isolation、Output enable、Level shifting Tri-State UQFN-16(1.8x2.6) Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
RT6236AHGQUF
UQFN-13(2x3)-40℃~+85℃@(TA) 1 4.5V~18V 650kHz 6A 700mV~8V Adjustable Buck Buck Built-in Yes UQFN-13(2x3) DC-DC Converters ROHSRichtek TechDC-DC Converters
TPD4E05U06QDQARQ1
USON-10(1x2.5)-40℃~+125℃@(Ta) 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.4V、8.7V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
LTC4358CDE#PBF
DFN-14-EP(3x4)0℃~+70℃ 1 20mΩ 5A 9V~26.5V Ideal Diode Overcurrent Protection、Reverse current blocking DFN-14-EP(3x4) ORing Controllers ROHSAnalog DevicesPower Distribution Switches
TPS2066TDGNRQ1
MSOP-8-EP-40℃~+105℃ 1 1A 2.7V~5.5V 70mΩ Active High High Side Switch Soft-start、Under-voltage lockout、Integrated charge pump、Overcurrent Protection、Over temperature protection、Short-Circuit Protection MSOP-8-EP Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
TPS3840PH30DBVRQ1
SOT-23-5-40℃~+125℃@(Tj) 1 220us 3V Active High No Push-pull Voltage Monitor Yes SOT-23-5 Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICs
GSB3112311HR
插件0℃~+60℃ 1.8A 18P 2 30V 5,000 cycles Blue Female Right Angle Type-A USB 2.0 插件 USB Connectors ROHSAmphenolUSB Connectors
74LCX07BQX
DQFN-14-EP(2.5x3)-40℃~+85℃ 1 1.7V、2V 10uA 200mV、400mV、550mV、600mV 2V~5.5V 32mA 3ns@5V,50pF 6 700mV、800mV 74LCX Open-drain Overvoltage-tolerant input、Local shutdown mode DQFN-14-EP(2.5x3) Logic Gates ROHSonsemiLogic Gates
93LC66BT-I/MC
TDFN-8-EP(2x3)-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 2MHz 2ms 4Kbit SPI Software write protection function、Power-down/Power-up protection circuit TDFN-8-EP(2x3) EEPROM ROHSMicrochip TechnologyEEPROM
CR0402-FX-1002GLF
0402-55℃~+155℃ 10kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountCR0402-FX-2003GLF
0402-55℃~+155℃ 200kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface Mount
DTC014TEBTL
SC-89(SOT-490)1 NPN (Pre-Biased) 100 100mA 10kΩ 150mV@5mA,0.5mA 150mW 250MHz 500nA 50V 5V NPN SC-89(SOT-490) Digital Transistors ROHSROHM SemiconductorDigital Transistors
README
README.mdAntmicro's open source Kria K26 Devboard
Copyright (c) 2022-2023 Antmicro
Overview
This project contains open hardware design files for a devkit created for AMD-Xilinx Kria K26 System on Module (SoM).
This development board routes the I/O interfaces from the SoM and provides the necessary power buses. The design files were prepared in KiCad 7.
Project structure
The main directory contains KiCad PCB project files, a LICENSE, and a README. The remaining files are stored in the following directories:
lib- contains the component librariesimg- contains graphics for this READMEdoc- contains schematics in pdf formassets- contains visual assets for showcasing this design on Open Hardware Portal.
Key Features
- AMD-Xilinx Kria K26 SOM
- Gigabit Ethernet
- DisplayPort output
- 4x USB 3.2 Gen 1 connector
- USB Type-C connector for FTDI JTAG and debug
- M.2 connector (key E) for optional WiFi and Bluetooth connectivity
- 2x 4-lane MIPI CSI-2 camera interface
- PMOD
- SD 3.0 (MicroSD UHS-1)
The board supports multiple power supply scenarios, including:
- PoE (Power over Ethernet)
- USB-C PD (Power Delivery)
- External PSU via DC Jack
The on-board camera connector is electrically compatible with several video accessories created by Antmicro, such as:
Block diagram
License
This project is published under the Apache-2.0 license.
Parts
660| Qty | Value | Footprint | References |
|---|---|---|---|
| 148 | C_100n_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C1, C10, C11, C12, C100, C101, C102, C103, C104, C105, C106, C107, C108, C118, C122, C124 +132 |
| 65 | TP_0.75mm_SMD | kria-k26-devboard-footprints:TP_SMD_0.75mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +49 |
| 37 | R_10k_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R103, R106, R108, R109, R110, R111, R112, R113, R114, R132, R134, R136, R138, R140, R145, R147 +21 |
| 21 | R_200k_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R33, R40, R41, R42, R43, R44, R45, R49, R50, R51, R53, R54, R55, R56, R172, R173 +5 |
| 16 | C_1u_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C36, C94, C95, C96, C97, C98, C109, C110, C111, C112, C117, C121, C159, C187, C188, C243 |
| 15 | DTC014T_SOT-416 | kria-k26-devboard-footprints:SOT-416 | Q3, Q4, Q5, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q17, Q18, Q19 |
| 14 | R_100k_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R7, R8, R11, R83, R87, R88, R89, R90, R91, R104, R118, R119, R149, R176 |
| 13 | R_0R_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R10, R37, R86, R97, R98, R100, R101, R127, R150, R165, R166, R170, R178 |
| 13 | R_2k2_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R23, R24, R29, R30, R31, R32, R34, R35, R71, R76, R107, R120, R121 |
| 12 | C_22u_0603 | kria-k26-devboard-footprints:C_0603_1608Metric | C211, C212, C213, C214, C215, C216, C217, C218, C223, C224, C225, C226 |
| 11 | C_10u_25V_0603 | kria-k26-devboard-footprints:C_0603_1608Metric | C183, C184, C185, C186, C201, C202, C203, C204, C205, C219, C220 |
| 10 | LED_G_0603_LG_L29K-G2J1-24-Z | kria-k26-devboard-footprints:LED_0603_1608Metric_G | D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 |
| 9 | C_10u_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C70, C71, C72, C73, C81, C82, C84, C85, C249 |
| 9 | R_0R_22.4A_0603 | kria-k26-devboard-footprints:R_0603_1608Metric | R156, R157, R158, R159, R160, R161, R162, R163, R164 |
| 8 | C_10u_0603 | kria-k26-devboard-footprints:C_0603_1608Metric | C20, C90, C91, C114, C237, C238, C245, C247 |
| 8 | C_22u_100V_2220 | kria-k26-devboard-footprints:C_2220_5650Metric | C172, C173, C174, C175, C176, C177, C178, C179 |
| 8 | R_1k_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R17, R36, R85, R126, R129, R130, R142, R143 |
| 8 | TPD4E05U06QDQARQ1 | kria-k26-devboard-footprints:USON-10_2.5x1mm_P0.5mm | U3, U14, U15, U19, U22, U25, U28, U41 |
| 7 | 1N4148WS | kria-k26-devboard-footprints:D_SOD-323F | D3, D4, D5, D6, D7, D21, D22 |
| 7 | 82400152 | kria-k26-devboard-footprints:SOT-563 | U20, U21, U26, U27, U37, U59, U60 |
| 7 | AP62301_TSOT | kria-k26-devboard-footprints:TSOT23-6 | U49, U50, U51, U52, U53, U54, U55 |
| 7 | C_4u7_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C40, C42, C86, C123, C127, C150, C242 |
| 6 | C_22u_16V_0603 | kria-k26-devboard-footprints:C_0603_1608Metric | C195, C196, C197, C198, C199, C200 |
| 6 | Fiducial_1mm_Mask2mm | kria-k26-devboard-footprints:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 5 | FB_120Z_1.3A_0402 | kria-k26-devboard-footprints:FB_0402_1005Metric | FB1, FB2, FB3, FB4, FB5 |
| 5 | R_1k5_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R6, R25, R26, R27, R28 |
| 5 | R_4k7_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R63, R64, R73, R74, R75 |
| 4 | 74AVC4T245_UQFN | kria-k26-devboard-footprints:UQFN-16-1.8x2.6mm_P0.4mm_Texas_RSV0016A | U1, U33, U42, U43 |
| 4 | C_470n_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C17, C18, C30, C31 |
| 4 | C_47u_0805 | kria-k26-devboard-footprints:C_0805_2012Metric | C115, C116, C119, C120 |
| 4 | L_1u_2.6A_0806 | kria-k26-devboard-footprints:L_0806_2016Metric | L5, L6, L8, L9 |
| 4 | MP_Pad6mm_Drill3mm | kria-k26-devboard-footprints:MP_Pad6mm_Drill3mm | MP1, MP2, MP3, MP4 |
| 4 | R_2k49_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R5, R68, R70, R139 |
| 4 | R_330R_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R1, R2, R77, R78 |
| 4 | R_470R_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R79, R80, R81, R82 |
| 4 | R_49R9_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R3, R4, R20, R21 |
| 4 | R_5k11_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R62, R99, R167, R171 |
| 4 | Spacer_Drill4.45mm_H5mm_9774050960R | kria-k26-devboard-footprints:Spacer_Drill4.45mm_H5mm_9774050960R | SP1, SP2, SP3, SP4 |
| 3 | C_100n_50V_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C153, C231, C232 |
| 3 | C_10n_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C92, C93, C113 |
| 3 | LTC4358CDE | kria-k26-devboard-footprints:DFN-14-1EP_4x3mm_P0.5mm | U56, U57, U58 |
| 3 | PMEG3050EP,115 | kria-k26-devboard-footprints:Nexperia_SOD128 | D23, D24, D25 |
| 3 | R_12k_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R38, R52, R102 |
| 3 | SN74AVC2T245_UQFN | kria-k26-devboard-footprints:UQFN-10_1.4x1.8x0.5mm_P0.4mm | U34, U44, U45 |
| 2 | ADM6-60-01.5-L-4-2-A-TR | kria-k26-devboard-footprints:Conn_Plug_Samtec_ADM6_4x60_ADM6-60-01.5-L-4-2-A-TR | J_SOM240_1, J_SOM240_2 |
| 2 | C_18p_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C154, C156 |
| 2 | C_1u_25V_0603 | kria-k26-devboard-footprints:C_0603_1608Metric | C155, C158 |
| 2 | C_22p_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C193, C194 |
| 2 | C_3n9_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C189, C190 |
| 2 | C_47n_0402 | kria-k26-devboard-footprints:C_0402_1005Metric | C130, C131 |
| 2 | C_47u_16V_1206 | kria-k26-devboard-footprints:C_1206_3216Metric | C180, C181 |
| 2 | L_1u_2.5A_0805 | kria-k26-devboard-footprints:L_0805_2012Metric | L4, L7 |
| 2 | L_3u3_5.9A_XEL4030 | kria-k26-devboard-footprints:L_Coilcraft-XEL4030 | L1, L2 |
| 2 | MB10S | kria-k26-devboard-footprints:SOIC-4_W3.9mm | D8, D9 |
| 2 | NCP730BMT330_WSON | kria-k26-devboard-footprints:WSON-6-1EP_2x2mm_P0.65mm | U38, U61 |
| 2 | Oscillator_25MHz_ESC_2016MV | kria-k26-devboard-footprints:Oscillator_SMD_ECS_2016MV_2x1.6x0.85mm | Y4, Y6 |
| 2 | PJA3441 | kria-k26-devboard-footprints:SOT-23-3 | Q6, Q16 |
| 2 | RT6236AHGQUF | kria-k26-devboard-footprints:UQFN-13_2x3mm_P0.5mm | U47, U48 |
| 2 | R_147k_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R122, R124 |
| 2 | R_1M_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R9, R12 |
| 2 | R_24k_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R123, R125 |
| 2 | R_31k6_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R131, R144 |
| 2 | R_33R_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R13, R14 |
| 2 | R_49k9_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R39, R175 |
| 2 | R_4k99_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R137, R146 |
| 2 | R_510R_0402 | kria-k26-devboard-footprints:R_0402_1005Metric | R128, R141 |
| 2 | SMF4L15CA | kria-k26-devboard-footprints:SOD-123FL | D26, D27 |
| 2 | TPS2066TDGNRQ1 | kria-k26-devboard-footprints:VSSOP-8-1EP_3x3x1.1mm_P0.65mm | U16, U18 |
| 2 | TPS3840PH30DBVR | kria-k26-devboard-footprints:SOT-23-5 | U31, U32 |
| 2 | USB-A_Amphenol_GSB3112311HR | kria-k26-devboard-footprints:USB-A_Receptacle_Amphenol_GSB3112311HR | U24, U29 |
| 2 | USB-C_GCT_USB4105-GF-A | kria-k26-devboard-footprints:USB-C_Receptacle_GCT_USB4105-GF-A | J8, J10 |
| 1 | 74LCX07_QFN | kria-k26-devboard-footprints:QFN-14-1EP_2.5x3mm_EP1.15x1.65mm_ONSemi_MLP14A | U36 |
| 1 | 824012823 | kria-k26-devboard-footprints:DFN1210-6 | U4 |
| 1 | 93LC66BT_DFN | kria-k26-devboard-footprints:DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm | U39 |
| 1 | AO3401A | kria-k26-devboard-footprints:SOT-23-3 | Q2 |
| 1 | AP7340-18FS4-7 | kria-k26-devboard-footprints:XDFN4 | U11 |
| 1 | BSS123 | kria-k26-devboard-footprints:SOT-23-3 | Q1 |
| 1 | BarrelJack_Pin2mm_MJ-179PH | kria-k26-devboard-footprints:BarrelJack_Pin2mm_MJ-179PH | J11 |
| 1 | Bus_M.2_2199119-6 | kria-k26-devboard-footprints:Bus_M.2_Socket_Key_E_TE_1-2199119-6 | J12 |
| 1 | Bus_RJ45_5-2337992-8 | kria-k26-devboard-footprints:RJ45_5-2337992-8_Horizontal | J5 |
The 605 most common of 660 parts.
Questions
How big is the Kria k26-devboard PCB?
It measures 118 × 100 mm and has 8 copper layers, 1.52 mm thick.
What parts does the Kria k26-devboard use?
660 parts, built around the 74AVC4T245RSVRG4, RT6236AHGQUF, TPD4E05U06QDQARQ1 and LTC4358CDE#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kria k26-devboard KiCad files?
From the antmicro/kria-k26-devboard repository on GitHub, at the commit this page was made from: the board is kria-k26-devboard.kicad_pcb and its schematic PoE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kria k26-devboard design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers43 × 43 mm
Gmsl serializer
antmicro/gmsl-serializer
Experimental GMSL2 serializer board compatible with Antmicro MIPI CSI video accessories
118 parts24Apache-2.0 - 6 layers70 × 50 mm
Thunderbolt pcie adapter
antmicro/thunderbolt-pcie-adapter
This project contains open hardware design files for an adapter board wrapping 4-lane (i.e. 4x) PCIe Gen 3.0 devices into a Thunderbolt 3 uplink. It is based on the Intel/JHL6340SLLSQ Thunderbolt controller.
272 parts82Apache-2.0 - 8 layers100 × 70 mm
Sample013-sdi mipi video converter
tscircuit/dataset-srj24
Ten production-oriented KiCad boards converted to Simple Route JSON
396 parts - 6 layers100 × 70 mm
Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0 - 10 layers120.4 × 90 mm
Bmc reference carrier board
antmicro/dc-scm-osm-l-carrier-card
DC-SCM Card supporting OSM-L System on Modules
568 parts13Apache-2.0 - 10 layers45 × 45 mm
- 4 layers66.5 × 45.7 mm
Tip top
psychogenic/asic-necklace-pcbs
Schems and PCBs for Matt's awesome ASIC necklace, in collaboration with Adam Zeloof
93 parts2