

MainBoard v1.0.0
EDL 2025 project
- Size
- 126.5 × 101.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 96
- Pads
- 274
- Tracks, vias
- 336, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Feb 2025
- Updated
- 1 Apr 2025
Overview
MainBoard v1.0.0 is an open-source printed circuit board by anirudhjangid2004, from the anirudhjangid2004/AutoDriveCar repository on GitHub. It is a 2-layer board of 126.5 × 101.5 mm with 63 parts on 96 nets, routed with 336 tracks and 12 vias.
It is built around the L293D, TXS0108EPW and ASMB-MTB0-0A3A2. Its parts include 14 resistors, 10 diodes, 9 connectors, 8 transistors and 6 ICs. It belongs with the computers and single-board computers boards and the RP2040 boards of this library.
Main components
3L293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor DriverTXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersASMB-MTB0-0A3A2
SMD3528-40℃~+100℃ 115° Common Anode Top-mount White Lens SMD3528 RGB LEDs ROHSBroadcom LimitedLight Emitting Diodes (LED)
README
README.mdAutoDriveCar
EDL 2025 project
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 8 | GREEN_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D4, D5, D6, D7, D8, D9 |
| 7 | NMOS | Connector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 6 | Jumper_2_Open | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | JP2, JP3, JP4, JP5, JP6, JP7 |
| 4 | 0.1uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2, C3, C4, C5 |
| 4 | Conn_01x03_Socket | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J7, J8, J9, J10 |
| 3 | L293D | Package_DIP:DIP-16_W7.62mm | U2, U4, U6 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J3 |
| 2 | TXS0108EPW | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical_1 | U3, U5 |
| 1 | 110 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 970 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | ASMB-MTB0-0A3A2 | LED_THT:LED_D5.0mm-4_RGB | D10 |
| 1 | C | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | Conn_01x02_Socket | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J5 |
| 1 | Conn_01x02_Socket | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | BATTERY_CONN1 |
| 1 | Conn_01x04_Socket | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_4-G_1x04_P5.00mm_Horizontal | J1 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J6 |
| 1 | Fuse | Fuse:Fuse_Blade_Mini_directSolder | F1 |
| 1 | Jumper_2_Open | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | JP9 |
| 1 | PMOS | Connector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | Q8 |
| 1 | RASPBERRY_PI_PICO | RASPBERRY_PI_PICO.kicad_mod:RASPBERRY_PI_PICO | U1 |
| 1 | RED_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW2 |
More from anirudhjangid2004/AutoDriveCar
1- 2 layers99.8 × 78.3 mm

Similar boards
- 4 layers60 × 95 mm

STM32H7 GuitarPedal
GuitarML/GuitarPedalSTM32
Guitar pedal using a stm32h7 microcontroller programmed with CubeIDE (PCB and Firmware)
101 parts100MIT - 2 layers50 × 47.1 mm

- 4 layers36.5 × 94.1 mm

- 4 layers49.8 × 41.8 mm

Cc1352-swim thermo
mik4el/cc1352-swim-thermo
Software and hardware for dual band radio high accuracy swim thermometer
55 parts2Apache-2.0 - 4 layers68.6 × 88.9 mm

- 2 layers48.3 × 43.2 mm

- 2 layers

Nanosaur NX shield
rnanosaur/nanosaur-NX-shield
🦸 A nanosaur NX, need a super shield. The Nanosaur NX shield is here!
28 parts1 - 2 layers30.3 × 33 mm

Questions
How big is the MainBoard v1.0.0 PCB?
It measures 126.5 × 101.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MainBoard v1.0.0 use?
63 parts, built around the L293D, TXS0108EPW and ASMB-MTB0-0A3A2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MainBoard v1.0.0 KiCad files?
From the anirudhjangid2004/AutoDriveCar repository on GitHub, at the commit this page was made from: the board is elecStack/Stack/MainBoard_v1.0.0/MainBoard_v1.0.0.kicad_pcb and its schematic elecStack/Stack/MainBoard_v1.0.0/MainBoard_v1.0.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MainBoard v1.0.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask anirudhjangid2004 before reusing the design.