

Power Supply Module
A compact dual-output linear voltage regulator module built using LM7805 and AMS1117-3.3, designed in KiCad. The module takes an input of 12V DC and provides regulated 5V and 3.3V outputs with basic protection and filtering.
- Size
- 38.5 × 27.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 5
- Pads
- 21
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 May 2025
- Updated
- 18 May 2025
Overview
Power Supply Module is an open-source printed circuit board by animesh2004, from the animesh2004/Power_Supply_Module repository on GitHub. It is a 2-layer board of 38.5 × 27.5 mm with 9 parts on 5 nets.
It is built around the AMS1117-3.3. Its parts include 4 capacitors, 2 ICs, 2 connectors and 1 diode. It belongs with the power boards of this library.
Main components
1README
README.md⚡ Power Supply Module PCB (12V → 5V, 3.3V)
A compact dual-output linear voltage regulator module built using LM7805 and AMS1117-3.3, designed in KiCad. The module takes an input of 12V DC and provides regulated 5V and 3.3V outputs with basic protection and filtering.
📦 Features
- ✅ Input Voltage: 9–15V DC
- ✅ Output 1: 5V (LM7805)
- ✅ Output 2: 3.3V (AMS1117)
- ✅ Input protection diode (1N4007)
- ✅ Electrolytic capacitor filtering
- ✅ Dual screw terminal output
- ✅ Standard THT components
🔧 Tools Used
| Tool | Version |
|---|---|
| KiCad | v7.x |
| Git | Yes |
| Gerber Viewer | Yes |
🧩 Components
| Reference | Component | Value |
|---|---|---|
| U1 | LM7805_T0220 | 5V Regulator |
| U2 | AMS1117-3.3 | 3.3V Regulator |
| D1 | 1N4007 | Diode |
| C1–C4 | Capacitor | 10µF |
| J1, J2 | Conn_01x02 | Input/Output |
📂 Project Files
| File/Folder | Description |
|---|---|
Schematic/ | KiCad schematic .kicad_sch |
PCB/ | PCB layout .kicad_pcb |
Gerbers/ | Gerber files for fabrication |
Images/ | Renders and layout screenshots |
README.md | This file |
🛠️ How to Use
- Connect 9–12V DC input to J1
- Output 1 (J2 Pin 1): 5V
- Output 2 (J2 Pin 2): 3.3V
- Verify pinout before powering
📤 Gerber Export
Gerbers are available in Gerbers/. You can upload them directly to JLCPCB, PCBWay, or OSH Park.
📌 License
This project is open-source under the MIT License.
🙋♂️ Author
Animesh Tripathi
Designed with 💚 in KiCad
GitHub Profile
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10µF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1, C2, C3, C4 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Power Supply Module PCB?
It measures 38.5 × 27.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power Supply Module use?
9 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power Supply Module KiCad files?
From the animesh2004/Power_Supply_Module repository on GitHub, at the commit this page was made from: the board is PowerSupply_Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power Supply Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask animesh2004 before reusing the design.