

Esp32-temp
Settings for esphome
- Size
- 57.1 × 56.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 36
- Pads
- 132
- Tracks, vias
- 528, 60
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Dec 2019
- Updated
- 29 Oct 2026
Overview
Esp32-temp is an open-source printed circuit board by angelnu, from the angelnu/esphome repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 57.1 × 56.3 mm with 28 parts on 36 nets, routed with 528 tracks and 60 vias.
It is built around the ESP32-WROOM-32 and DS18B20. Its parts include 5 capacitors, 4 resistors, 4 connectors, 3 ICs and 2 transistors. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
2ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesDS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
README
README.mdesphome
This repository contains my devices based on ESPHome. Each yaml in this repository represents one of my devices and can be programed following the instructions bellow.
The devices folder contains the instructions for each device (firmware, schematics, 3D boxes, etc).
Programming
To program/update these devices you need to:
- create a
secrets.yamlfile. You can usesecrets_template.yamlas base - start the esphome dashboard with this git repository as config folder.
- Connect to the dashboard
- First time you program your device you will need to program via a serial port. You might use a CP2104
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C3, C4 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C5 |
| 2 | 12K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R4 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | IRLML2060 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SANYOU_SRD_Form_A | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | BOOT1, RESET1 |
| 1 | 220V | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_8-G-5.08_1x08_P5.08mm_Vertical | J1 |
| 1 | Conn_01x24_Male | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J5 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | HLK-PM05 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | PROGRAM | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | TEMP | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical | J4 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U3 |
More from angelnu/esphome
4- 2 layers64.6 × 87.1 mm

- 2 layers43.5 × 37 mm

- 2 layers61 × 28 mm

- 2 layers29 × 110.6 mm

Similar boards
- 2 layers71.1 × 109.2 mm

- 2 layers110 × 90 mm

- 2 layers115 × 88 mm

- 2 layers71.2 × 78.4 mm

- 2 layers115.8 × 48.3 mm

- 2 layers100 × 40 mm

- 2 layers100 × 100 mm

PcbV10
klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.
221 parts5MIT - 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
Questions
How big is the Esp32-temp PCB?
It measures 57.1 × 56.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32-temp use?
28 parts, built around the ESP32-WROOM-32 and DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-temp KiCad files?
From the angelnu/esphome repository on GitHub, at the commit this page was made from: the board is devices/pcb-thermostate-220/KiCad/esp32-temp.kicad_pcb and its schematic devices/pcb-led_lights/kicad/pcb-led-lights/pcb-led-lights.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-temp design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).