2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50
2 layers134 × 83 mm
IDBoard
andywm/DrawerID- Size
- 134 × 83 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 280
- Nets
- 6
- Pads
- 480
- Tracks, vias
- 480, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jun 2025
- Updated
- 3 Dec 2025
Overview
IDBoard is an open-source printed circuit board by andywm, from the andywm/DrawerID repository on GitHub, published under the MIT licence. It is a 2-layer board of 134 × 83 mm with 280 parts on 6 nets, routed with 480 tracks and 0 vias.
It is built around the ATTINY10-TSH. Its parts include 240 connectors and 40 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
280| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | ATtiny10-TS | Package_TO_SOT_SMD:SOT-23-6 | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +24 |
| 40 | Gnd | TestPoint:TestPoint_Pad_1.0x1.0mm | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 +24 |
| 40 | PA3 | TestPoint:TestPoint_Pad_1.0x1.0mm | J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6 +24 |
| 40 | PA4 | TestPoint:TestPoint_Pad_1.0x1.0mm | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 +24 |
| 40 | PA5 | TestPoint:TestPoint_Pad_1.0x1.0mm | J5, J5, J5, J5, J5, J5, J5, J5, J5, J5, J5, J5, J5, J5, J5, J5 +24 |
| 40 | PA6 | TestPoint:TestPoint_Pad_1.0x1.0mm | J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J4 +24 |
| 40 | Vcc | TestPoint:TestPoint_Pad_1.0x1.0mm | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +24 |
Questions
How big is the IDBoard PCB?
It measures 134 × 83 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IDBoard use?
280 parts, built around the ATTINY10-TSH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IDBoard KiCad files?
From the andywm/DrawerID repository on GitHub, at the commit this page was made from: the board is Drawer/IDBoard/IDBoard.kicad_pcb and its schematic Drawer/IDBoard/IDBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IDBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers7.4 × 12.2 mm
- 2 layers100 × 100 mm
Desklight panel
dpiegdon/tiny-ws2812-desklight
ATTiny10 powered WS2812 RGB LED strip: hard- and firmware design
256 parts10GPL-3.0 - 2 layers13 × 10.2 mm
- 2 layers65 × 56 mm
- 2 layers11.4 × 9.1 mm
- 2 layers24.6 × 11.1 mm
PWM+fan stop
yvoronkin/FANSTOP
In a small form factor, an extension of the fan control is implemented.
24 parts2CERN-OHL-S-2.0 - 2 layers35.3 × 74.4 mm
