

Powermeter
RF powermeter with USB-interface
- Size
- 80 × 49 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 162
- Nets
- 91
- Pads
- 483
- Tracks, vias
- 1,088, 300
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Dec 2022
- Updated
- 30 Aug 2026
Overview
Powermeter is an open-source printed circuit board by andypfau, from the andypfau/rf_powermeter repository on GitHub, published under the MIT licence. It is a 4-layer board of 80 × 49 mm with 162 parts on 91 nets, routed with 1,088 tracks and 300 vias.
It is built around the ADS7822E/250G4, TMP112AQDRLRQ1 and LP2985IM5-3.3, with the EZA-DLU02AAJ, LM4040BIM3-3.0 and REG113EA-5/250 among its other parts. Its parts include 54 capacitors, 47 resistors, 15 ICs, 13 crystals and 3 diodes. It belongs with the sensors and measurement and radio and wireless boards and the PIC boards of this library.
Main components
8ADS7822E/250G4
VSSOP-8-0.65mm-40℃~+85℃ 12 2.7V~5.25V 200kHz 2LSB External External Multiplexers、Simultaneous sampling SAR Serial Port Yes VSSOP-8-0.65mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADCs)TMP112AQDRLRQ1
SOT-563-40℃~+125℃ 1.4V~3.6V 12bit 2.2uA 26ms I2C、SMBus ±0.5℃ SOT-563 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsLP2985IM5-3.3
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 350mV@(150mA) 45dB@(1kHz) 850uA Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsEZA-DLU02AAJ
1206EMI/RFI Filters (LC, RC Networks)PanasonicLM4040BIM3-3.0
SOT-23-3-40℃~+85℃@(Ta) 100ppm/℃ 15mA 35uVrms 3V Fixed Parallel ±0.2% SOT-23-3 Voltage ReferenceMaxim Integrated (Analog Devices)Voltage ReferenceREG113EA-5/250
VSSOP-8-40℃~+85℃@(Ta) 1 10V 250mV@(400mA) 28uVrms 400mA 5V 65dB@(120Hz) 850uA Fixed Over Current Protection、Over Temperature Protection Positive VSSOP-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-4
UncategorisedSTMicroelectronicsMBR0520L
SOD-123-65℃~+125℃ 1 Independent 20V 250uA@20V 385mV@500mA 5.5A 500mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdRF Powermeter
A 10 MHz to 8 GHz RF power meter with USB connectivity.
Design
Photos
Project Status
The hardware is working. The firmware is considered beta, but all functionality is implemented, and should work.
Thoughts on Design
- The SMA connector is quite cheap, and will probably not last long (no stainless steel). Also, with the current design, the SMA tighening torque might break the solder connectio to the PCB (happened during testing).
- The HMC602 is EOL (see production notes below).
Further Reading
Parts
162| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP201, TP401, TP402, TP403, TP404, TP405, TP406, TP407, TP408, TP409, TP410, TP501, TP502, TP503, TP504, TP601 +1 |
| 15 | C_100n_25V_Z5U_0603_small | Capacitor_SMD:C_0603_1608Metric | C301, C304, C306, C307, C308, C309, C402, C404, C410, C413, C602, C604, C605, C608, C609 |
| 14 | R_0_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R201, R204, R301, R305, R306, R401, R402, R408, R409, R411, R412, R501, R508, R604 |
| 6 | C_10µ_25V_X7R_0805 | Capacitor_SMD:C_0805_2012Metric | C310, C401, C411, C412, C417, C419 |
| 6 | C_FT_100n_16V_0603 | .powermeter:C_Feedthru_0603 | C302, C305, C501, C502, C601, C606 |
| 6 | FB_200mA_742792093 | Capacitor_SMD:C_0805_2012Metric | FB301, FB401, FB501, FB502, FB601, FB602 |
| 5 | DNP | Resistor_SMD:R_0603_1608Metric | R202, R203, R407, R602, R605 |
| 4 | CavityClip_Angled_S0981-46R | .powermeter:S0981-46R | X501, X503, X506, X508 |
| 4 | MountingHoleConnected | MountingHole:MountingHole_3.2mm_M3_Pad | X101, X102, X103, X104 |
| 4 | R_1k_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R314, R316, R507, R509 |
| 3 | C_100n_10V_X7R_0402_small | Capacitor_SMD:C_0402_1005Metric | C505, C506, C507 |
| 3 | C_100p_50V_NP0_0402_small | Capacitor_SMD:C_0402_1005Metric | C509, C510, C511 |
| 3 | C_10n_50V_X7R_0603_small | Capacitor_SMD:C_0603_1608Metric | C303, C416, C418 |
| 3 | C_1n_50V_X7R_0603_small | Capacitor_SMD:C_0603_1608Metric | C420, C421, C512 |
| 3 | C_1µ_25V_X7R_0805 | Capacitor_SMD:C_0805_2012Metric | C406, C414, C415 |
| 3 | CavityClip_Straight_S0971-46R | .powermeter:S0971-46R | X502, X504, X505 |
| 3 | DNP | Capacitor_SMD:C_0603_1608Metric | C607, R403, R410 |
| 3 | R_10_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R303, R606, R607 |
| 3 | R_12k_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R309, R310, R405 |
| 2 | C_330p_50V_NP0_0402_small | .powermeter:R_0402_RF_Thru | C503, C504 |
| 2 | C_Al_330µ_16V_UUD1C330MCL1GS | Capacitor_SMD:CP_Elec_6.3x5.8 | C405, C407 |
| 2 | LP2985IM5-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U403, U404 |
| 2 | MountingHoleConnected | MountingHole:MountingHole_2.2mm_M2_Pad | X105, X106 |
| 2 | OP_MAX4230AUK+T | Package_TO_SOT_SMD:SOT-23-5 | U602, U603 |
| 2 | R_100_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R304, R308 |
| 2 | R_1k1_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R315, R317 |
| 2 | WE744053100_PowerInd | .powermeter:L_Wuerth_WE-TPC-6.3mm | L401, L402 |
| 1 | 15 | .powermeter:R_0402_RF_Thru | R502 |
| 1 | 180 | .powermeter:R_0402_RF_Thru | R506 |
| 1 | 27.4 | .powermeter:R_0402_RF_Thru | R504 |
| 1 | 49.9 | .powermeter:R_0402_RF_ToGND | R505 |
| 1 | 68 | .powermeter:R_0402_RF_ToGND | R503 |
| 1 | ADS7822E-250 | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U604 |
| 1 | C_10n_50V_Z5U_0603_small | Capacitor_SMD:C_0603_1608Metric | C408 |
| 1 | C_220p_50V_NP0_0402_small | .powermeter:R_0402_RF_ToGND | C508 |
| 1 | C_22n_50V_X7R_0603_small | Capacitor_SMD:C_0603_1608Metric | C603 |
| 1 | C_3p3_50V_NP0_0603_small | Capacitor_SMD:C_0603_1608Metric | C409 |
| 1 | C_47n_50V_Z5U_0603_small | Capacitor_SMD:C_0603_1608Metric | C403 |
| 1 | Conn_PICkit_1.27mm | .powermeter:Conn_PICkit_1.27mm | J301 |
| 1 | EZA-DLU02AAJ | .powermeter:EZA-DLU | U202 |
| 1 | HMC602LP4E_RF-Sensor | .powermeter:HMC602LP4 | U502 |
| 1 | LED_RGB_EAST1616RGBB6 | .powermeter:EAST1616RGBB6 | D301 |
| 1 | LM4040BIM3-3.0 | Package_TO_SOT_SMD:SOT-23 | U601 |
| 1 | LT3467A | Package_DFN_QFN:DFN-8-1EP_2x3mm_P0.5mm_EP0.61x2.2mm | U401 |
| 1 | MBR0520L | Diode_SMD:D_SOD-123 | D401 |
| 1 | Memory_24CS512T-E-MS | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U302 |
| 1 | NFE31PT221D1E9L_Filter | .powermeter:NFE31PT221D1E9L | FL201 |
| 1 | Osc_8M_830208214709 | .powermeter:Osc_IQD_2.0x1.6mm | U301 |
| 1 | PIC24FJ32GU202-I-SS | .powermeter:PIC24FJ32GU202-I-SS | U303 |
| 1 | REG113EA-5 | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U402 |
| 1 | R_100k_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R307 |
| 1 | R_10k_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R302 |
| 1 | R_110k_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R406 |
| 1 | R_150_1P_thick_0805_small | Resistor_SMD:R_0805_2012Metric | R313 |
| 1 | R_270_1P_thick_0805_small | Resistor_SMD:R_0805_2012Metric | R312 |
| 1 | R_2k7_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R603 |
| 1 | R_330_1P_thick_0805_small | Resistor_SMD:R_0805_2012Metric | R311 |
| 1 | R_68_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R601 |
| 1 | R_68k_1P_thick_0603_small | Resistor_SMD:R_0603_1608Metric | R404 |
| 1 | SMA-f_Molex732511150 | .powermeter:Molex_SMA_732511150_Handsolder | J501 |
| 1 | TMP112AQDRLRQ1 | .powermeter:SOT-563_Smallpads | U501 |
| 1 | TPD1E0B04DPYT_TVS_0402 | .powermeter:R_0402_RF_ToGND | D501 |
| 1 | USBLC6-4 | Package_TO_SOT_SMD:SOT-23-6 | U201 |
| 1 | USB_B_Micro_Amphenol_10103594 | .powermeter:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J201 |
| 1 | WE435151014824_PushBtn | .powermeter:WE435151014824 | SW301 |
Similar boards
- 2 layers98 × 98 mm

- 2 layers41 × 35 mm

- 2 layers64 × 100 mm

TWIST tester
batterylabunipi/TWIST
TWIST is an open framework for Li-ion cell characterization based on Python and Raspberry Pi
77 parts5 - 2 layers85 × 54.5 mm

Maithoga lcd board 480x320 R61529
voloviq/maithoga_lcd_board_480x320_R61529
PCB Board for Maithoga display with resolution 480x320 based on chip R61529 compatible with ILI9481.
22 parts3 - 2 layers43.6 × 43.6 mm

Esp32 dron
Sagaz0501/esp32-drone
PCB ESP32 quadcopter: KiCad hardware + Madgwick IMU firmware + WiFi web UI
75 parts1MIT - 2 layers58.4 × 83.2 mm

- 4 layers90.8 × 47 mm

Pickit
ananevego/ProjectFreeCad
Конвертер библиотечных footprint-файлов KiCad .kicadmod в самостоятельные библиотеки FreePCB2 .fpl. Написан на Python 3.10+, внешние зависимости не нужны.
122 parts - 4 layers78 × 78 mm

Questions
How big is the Powermeter PCB?
It measures 80 × 49 mm and has 4 copper layers, 1.58 mm thick.
What parts does the Powermeter use?
162 parts, built around the ADS7822E/250G4, TMP112AQDRLRQ1, LP2985IM5-3.3 and EZA-DLU02AAJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Powermeter KiCad files?
From the andypfau/rf_powermeter repository on GitHub, at the commit this page was made from: the board is hardware/KiCad/rev02/Powermeter.kicad_pcb and its schematic hardware/KiCad/rev02/Powermeter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Powermeter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).