

TWIST tester
TWIST is an open framework for Li-ion cell characterization based on Python and Raspberry Pi
- Size
- 64 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 43
- Pads
- 180
- Tracks, vias
- 460, 49
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Oct 2018
- Updated
- 18 Dec 2018
Overview
TWIST tester is an open-source printed circuit board by batterylabunipi, from the batterylabunipi/TWIST repository on GitHub. It is a 2-layer board of 64 × 100 mm with 77 parts on 43 nets, routed with 460 tracks and 49 vias.
It is built around the VOD205T, DMG3420U and MBR0520L. Its parts include 24 resistors, 13 capacitors, 9 connectors, 5 diodes and 3 ICs. It belongs with the power boards of this library.
Main components
3VOD205T
SOIC-8Transistor, Photovoltaic Output OptoisolatorsVishay IntertechnologyDMG3420U
SOT-23-55℃~+150℃ 1 N-channel 20V 21mΩ@10V 434.7pF 5.47A 5.4nC@4.5V 61.2pF 69.1pF 740mW 950mV SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMBR0520L
SOD-123-65℃~+125℃ 1 Independent 20V 250uA@20V 385mV@500mA 5.5A 500mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdTWIST
TWIST is an open framework for Li-ion cell characterization based on Python and Raspberry Pi
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | TestPoint | MYLIB:TSTPOINT | -2.5V, -5V, +2.5V, +5V, +12V, CK_RELE1, CK_RELE2, DPIN1, DPIN3, GA, GD, T13, T14, VG1, VG3, VIN +1 |
| 8 | 100nF | MYLIB:0805 | C2, C3, C4, C5, C10, C11, C12, C13 |
| 5 | 1k | MYLIB:0805 | R1, R3, R4, R10, R11 |
| 4 | mounting_hole_4MM | MYLIB:mounting_hole_4MM | , , , |
| 3 | 100K | MYLIB:0805 | R5, R8, R9 |
| 3 | 100k | MYLIB:0805 | R2, R14, R16 |
| 3 | morsett_1x02_MALE | MYLIB:morsett_1x02 | J3, J5, J10 |
| 2 | 0 | MYLIB:0805 | R18, R19 |
| 2 | 10K | MYLIB:0805 | R6, R7 |
| 2 | 1K | MYLIB:0805 | R12, R13 |
| 2 | 1M | MYLIB:0805 | R20, R21 |
| 2 | 66.5k | MYLIB:0805 | R15, R17 |
| 2 | DMG3420U | MYLIB:SOT-23-3-POT | Q1, Q2 |
| 2 | MBR0520L | MYLIB:SOD-123 | D2, D3 |
| 1 | 100nf | MYLIB:0805 | C7 |
| 1 | 100u | MYLIB:0805 | C6 |
| 1 | 100uF | MYLIB:C_2312 | C1 |
| 1 | 1u | MYLIB:0805 | C8 |
| 1 | 1uF | MYLIB:0805 | C9 |
| 1 | 2k | MYLIB:0805 | R22 |
| 1 | 330K | MYLIB:0805 | R24 |
| 1 | 990K | MYLIB:R_1206 | R23 |
| 1 | ADA4051 | MYLIB:SOT-23-5 | U3 |
| 1 | ALIM_JACK | MYLIB:conn_alim | J2 |
| 1 | CONN_01X04_MALE | MYLIB:morsett_1x04 | J6 |
| 1 | CONN_01X06 | MYLIB:morsett_1x06_CB | J4 |
| 1 | DB25_MALE | MYLIB:DB25MC | J1 |
| 1 | LED_G | MYLIB:0805 | D1 |
| 1 | LED_R | MYLIB:0805 | D5 |
| 1 | LED_Y | MYLIB:0805 | D4 |
| 1 | LT6003 | MYLIB:SOT-23-5 | U2 |
| 1 | VOD205T | MYLIB:8-SOIC | U1 |
| 1 | morsett_1x02_MALE | MYLIB:morsett_1x02_G | J11 |
| 1 | morsett_1x03_MALE | MYLIB:morsett_1x03 | J9 |
Similar boards
- 2 layers41 × 35 mm

- 4 layers80 × 49 mm

- 2 layers85 × 54.5 mm

Maithoga lcd board 480x320 R61529
voloviq/maithoga_lcd_board_480x320_R61529
PCB Board for Maithoga display with resolution 480x320 based on chip R61529 compatible with ILI9481.
22 parts3 - 2 layers43.6 × 43.6 mm

Esp32 dron
Sagaz0501/esp32-drone
PCB ESP32 quadcopter: KiCad hardware + Madgwick IMU firmware + WiFi web UI
75 parts1MIT - 2 layers58.4 × 83.2 mm

- 4 layers90.8 × 47 mm

Pickit
ananevego/ProjectFreeCad
Конвертер библиотечных footprint-файлов KiCad .kicadmod в самостоятельные библиотеки FreePCB2 .fpl. Написан на Python 3.10+, внешние зависимости не нужны.
122 parts - 4 layers78 × 78 mm

- 2 layers124 × 63 mm

Questions
How big is the TWIST tester PCB?
It measures 64 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TWIST tester use?
77 parts, built around the VOD205T, DMG3420U and MBR0520L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TWIST tester KiCad files?
From the batterylabunipi/TWIST repository on GitHub, at the commit this page was made from: the board is HW/TWIST_tester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TWIST tester design in my own project?
Its repository states no licence, so its author keeps all rights: ask batterylabunipi before reusing the design.