

J-01-Alps
Alps PCB for the J-01 rev1 keyboard
- Size
- 360 × 97 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 209
- Nets
- 120
- Pads
- 513
- Tracks, vias
- 913, 69
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Dec 2021
- Updated
- 28 Dec 2022
Overview
J-01-Alps is an open-source printed circuit board by andygunn, from the andygunn/J-01-PCB-Alps repository on GitHub. It is a 2-layer board of 360 × 97 mm with 209 parts on 120 nets, routed with 913 tracks and 69 vias.
It is built around the ATMEGA32U4-MU and PRTR5V0U2X. Its parts include 82 diodes, 5 capacitors, 2 ICs, 1 connector and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdJ-01 Alps PCB
This is an Alps compatible PCB for the J-01 keyboard. Many thanks to Flex, the designer of the original PCB for their help with dimensions and layout compatibility. Additional thanks to Anjheos for the help with adding J-01 rev2 compatibility.
While it lacks support for MX switches, it has Alps switch support and the following additional features:
- Full bottom row support per the options in Via (see the following Keyboard Layout for more information).
- Normal, stepped, and 3800-style Capslock footprints.
- ISO Enter support - including for 1.25U vertical and horizontal rotation (Matias, DCS?), and 1.5U vertical orientation (Dell AT102).
- Some hand-solderable SMT component support, though the ATmega32U4-MU MCU is not hand-solderable.
- This PCB maintains PCB-mount MX stabilizer support, as most modern Alps keysets relased now have MX-style stabilizers. Using a plate with MX-style stabilizer cutouts will be requried to use those.
Some notable changes from the original J-01 rev1 PCB:
- Dual ground planes, instead of the GND / 5V plane on the original. It appears that the 5V ground plane on the original facilitated easier routing of the LED 5V signal, as well as power to the MCU. Since this Alps version of the PCB does not utilize in-switch LED footprints, this was changed.
- The spacing of the 6U spacebar stabilizer is different. I am not sure if the original PCB has these incorrect, or if I am using a different 6U spacebar stabilizer footprint, but that is a discrepancy.
I provide this PCB without liability and without any guarantees regarding functionality, as expressed in the licenses under which this PCB is licensed.
Front render:

Back render:

Parts
209| Qty | Value | Footprint | References |
|---|---|---|---|
| 82 | SOD-123 | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +66 |
| 71 | MX_Alps-1U | Alps_Only:ALPS-1U | SW--1, SW-,1, SW-.1, SW-'1, SW-/1, SW-#1, SW-0, SW-1, SW-2, SW-3, SW-4, SW-5, SW-6, SW-7, SW-8, SW-9 +55 |
| 8 | MX_Alps-1.5U | Alps_Only:ALPS-1.5U | SW-\2, SW-LALT2, SW-LALT4, SW-LCTRL2, SW-RALT1, SW-RALT3, SW-RCTRL1, SW-TAB1 |
| 7 | MX_Alps-1.25U | Alps_Only:ALPS-1.25U | SW-LALT1, SW-LALT3, SW-LCTRL1, SW-LSHIFT2, SW-LWIN1, SW-RALT2, SW-RCTRL2 |
| 3 | .1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8 |
| 3 | Stab-2.25U | MX_Alps_Hybrid:MX-2.25U-Stab-Only | Stab-225U1, Stab-225U2, Stab-225U3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RC3, RC4 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RC1, RC2 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CC1, CC2 |
| 2 | MX_Alps-1.75U | Alps_Only:ALPS-1.75U | SW-CAPS1, SW-RSHFT1 |
| 2 | MX_Alps-2.25U | Alps_Only:ALPS-2.25U | SW-ANSIEN1, SW-SPACE225 |
| 2 | MX_Alps-ISO | Alps_Only:ALPS-1U | SW-ISOEN2, SW-ISOEN3 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | ATmega32U4-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | MX_Alps-1.75U | Alps_Only:ALPS-1.5U | SW-3800CAPS1 |
| 1 | MX_Alps-1.75U | Alps_Only:ALPS-1.25U | SW-STEPCAPS1 |
| 1 | MX_Alps-1.U | Alps_Only:ALPS-1U | SW-LWIN3 |
| 1 | MX_Alps-1U | Alps_Only:ALPS-2.25U | SW-LSHIFT1 |
| 1 | MX_Alps-2.75U | Alps_Only:ALPS-2.75U | SW-SPACE275 |
| 1 | MX_Alps-2U | Alps_Only:ALPS-2U | SW-BKSP1 |
| 1 | MX_Alps-6.25U | Alps_Only:ALPS-6.25U | SW-SPACE625 |
| 1 | MX_Alps-6U | MX_Alps_Hybrid:MX-6U-Centered-ReversedStabilizers-NoLED | SW-SPACE6 |
| 1 | MX_Alps-7U | Alps_Only:ALPS-7U | SW-SPACE7 |
| 1 | MX_Alps-ISO | Alps_Only:ALPS-ISO-FLIPPED | SW-ISOEN1 |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | U4 |
| 1 | SM04B-SRSS-TB_04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | JST2 |
| 1 | SW_Push | random-keyboard-parts:SKQGADE010 | SW1 |
| 1 | Stab-2.75U | MX_Alps_Hybrid:MX-2.75U-Stab-Only | Stab-275U1 |
| 1 | Stab-2U | MX_Alps_Hybrid:MX-2U-Stab-Only | Stab-2U1 |
| 1 | Stab-6.25U | MX_Alps_Hybrid:MX-6.25U-Stab-Only-Reversed | Stab-625U1 |
| 1 | Stab-7U | MX_Alps_Hybrid:MX-7U-Stab-Only-Reversed | Stab-7U1 |
Similar boards
- 2 layers344 × 124.5 mm

- 2 layers285 × 95.1 mm

- 2 layers285 × 95.1 mm

- 2 layers284.3 × 116.2 mm

- 2 layers285.7 × 95.5 mm

Jones
jpskenn/Jones
Row-staggered 60% keyboard with gapless R2-R3 row. GH60 case compatible.
249 parts12MIT - 2 layers285 × 95.1 mm

Nora
jpskenn/Nora
Narrow pitch keyboard with Choc switches and keycaps. GH60 compatible.
303 parts12MIT - 2 layers209.6 × 76.2 mm

Didaktik
calvin-mcd/Didaktik-40
a 40s keyboard inspired by the Didaktik computer & keyboard
129 parts9GPL-3.0 - 2 layers228.4 × 85 mm

LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.
108 parts8
Questions
How big is the J-01-Alps PCB?
It measures 360 × 97 mm and has 2 copper layers, 1.6 mm thick.
What parts does the J-01-Alps use?
209 parts, built around the ATMEGA32U4-MU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the J-01-Alps KiCad files?
From the andygunn/J-01-PCB-Alps repository on GitHub, at the commit this page was made from: the board is J-01-Alps.kicad_pcb and its schematic J-01-Alps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the J-01-Alps design in my own project?
Its repository states no licence, so its author keeps all rights: ask andygunn before reusing the design.