2 layers44 × 50 mm H bridge-2, the printed circuit board in 3D

H bridge-2

Rpo for pcb layouts, gerber and gcode files

Size: 44 × 50 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 17
Nets: 14
Pads: 40
Tracks, vias: 107, 0
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 18 Jun 2018
Updated: 30 Aug 2022

Overview

H bridge-2 is an open-source printed circuit board by androiders, from the androiders/pcbs repository on GitHub. It is a 2-layer board of 44 × 50 mm with 17 parts on 14 nets, routed with 107 tracks and 0 vias.

It is built around the BC547, BD139 and BD140. Its parts include 6 transistors, 4 resistors, 4 diodes and 3 connectors. It belongs with the interfaces and adapters boards of this library.

Main components

README

README.md

View this project on CADLAB.io.

pcbs

Repo for pcb layouts, gerber and gcode files

Ki-Cad

PCB layout:

Use as wide traces as possible. 1mm preffered.
Dont use "filled areas" if possible. It does not make good geometry in flatcam
Don't forget to set origin marker
Export gerber: use auxiliary axis

FlatCam

geometry generation:

If you are using thru-hole components or using bottom layer, mirror around y axis for both geometry and Drilling
Edit drill files if necessary for fewer drill sizes
TODO: test double sided layout by mirroring around center axis!

Isolation generation:

Current isolation mill depth to test: 0.04 mm (0.05 was tested and seems to work fine!) (Common copper depth is about 0.03 mm)
Current feedrate on isolation milling to test: 60 mm/s
spindle speed 12000 rpm
use 0.2 mm tool width on cnc generation
2 passes with 0.1 overlap

Cutout generation:

Current cutout mill depth: 1.6 mm
Current feedrate on cutout milling: 40 mm/s
spindle speed 12000 rpm

FlatCam defaults:

put a link in ~/.FlatCAM/defaults.json

bCNC

Probe:

Fastfeed: 120
Probefeed: 25
Probe points: 4/cm (in each direction)

Drilling:

Current drill plunge rate to test 20 mm/s
spindle speed: 12000 rpm
Drill depth: 1.6

Category and platform

Interfaces and adapters

Project files

Show this board on your page

https://pcbkit.io/boards/androiders/pcbs/h-bridge/h-bridge/h-bridge-2.kicad_pcb

The board's own page, for a message or a post.

Source

Repository: androiders/pcbs
Board file: h-bridge/h-bridge/h-bridge-2.kicad_pcb
Commit: 6aef352
Licence: Not stated

Parts

Qty	Value	Footprint	References
4	1N4001	Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal	D1, D2, D3, D4
4	R	Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal	R1, R2, R3, R4
2	BC547	Package_TO_SOT_THT:TO-92_Inline	Q1, Q6
2	BD139	Package_TO_SOT_THT:TO-126-3_Vertical	Q3, Q5
2	BD140	Package_TO_SOT_THT:TO-126-3_Vertical	Q2, Q4
1	Cntrl	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal	J1
1	Motor	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal	J3
1	Pwr	TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal	J2

Similar boards

2 layers155.2 × 155.2 mm
Stereo panel
lahirunirmalx/discrete-stereo-amp
Hobby stereo class-AB amplifier (BC547/BD139/BD140), discrete 12 V supply and volume board: simulated, generated KiCad boards, docs. CC BY-NC-SA 4.0
401 parts
2 layers149.9 × 100.3 mm
Old School Motor Driver
MilosSubotic/LPRS2_2024

172 partsMIT
2 layers100 × 50 mm
Amplificador
ThiagoAlterino/Electronica_Aplicada_2
Repositorio para la materia electronica aplicada 2 UTN FRBA
39 parts
2 layers174.8 × 84 mm
DDS A2 rev1
apxco/Kicad
Zum Testen von einigen Transistorschaltungen für Verstärker. Noch nicht fertig.
69 parts
2 layers100 × 100 mm
Amply
T76-org/amply
A $10 desktop Bluetooth amplifier you'll love
67 parts14GPL-3.0
2 layers84.5 × 82.6 mm
Classab amp
prydin/classab-amp-mosfet
MOSFET-based 50W Class AB amplifier
67 parts9
2 layers40 × 99 mm
Output mixer
mohoyt/output_mixer
Simple 4 channel Eurorack output mixer
114 parts7CERN-OHL-S-2.0
2 layers135.8 × 56.1 mm
Power board
xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.
87 parts5GPL-3.0

Questions

How big is the H bridge-2 PCB?

It measures 44 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the H bridge-2 use?

17 parts, built around the BC547, BD139 and BD140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the H bridge-2 KiCad files?

From the androiders/pcbs repository on GitHub, at the commit this page was made from: the board is h-bridge/h-bridge/h-bridge-2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the H bridge-2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask androiders before reusing the design.