
CANNONBALL
user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with

AU Mesh Club Workshop Design Finished in KiCad
Esp32 is an open-source printed circuit board by andrewsuggs465, from the andrewsuggs465/esp32-c3 repository on GitHub. It is a 2-layer board of 50.1 × 38.1 mm with 19 parts on 25 nets, routed with 168 tracks and 21 vias.
It is built around the ESP32-C3-WROOM-02-H4 and AP2112K-3.3. Its parts include 7 resistors, 5 capacitors, 3 connectors, 2 ICs and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
Note: The nets were assigned incorrectly for the power rails GND, +3.3V and +5V so those traces need to be corrected.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J4 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with


pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.



anasskrim61-wq/esp32-c3-mini
Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project

bapsenpai-blip/STM32F405-4-layer-flight-controller
My first PCB revision, not fabricated yet, looking for design review

It measures 50.1 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the ESP32-C3-WROOM-02-H4 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the andrewsuggs465/esp32-c3 repository on GitHub, at the commit this page was made from: the board is esp32/esp32.kicad_pcb and its schematic esp32/esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask andrewsuggs465 before reusing the design.