4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers100 × 100.1 mm
AutoPilot
AndrewFischer/AutoPilotA QMK compatible keypad
- Size
- 100 × 100.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 61
- Pads
- 238
- Tracks, vias
- 313, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Mar 2023
- Updated
- 13 Sep 2024
Overview
AutoPilot is an open-source printed circuit board by AndrewFischer, from the AndrewFischer/AutoPilot repository on GitHub. It is a 2-layer board of 100 × 100.1 mm with 50 parts on 61 nets, routed with 313 tracks and 10 vias.
It is built around the 1N4148W. Its parts include 16 switches, 15 diodes, 9 resistors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
AutoPilotPlate/readme.mdAn FR-4 plate for the AutoPilot keypad
Key switches mount to this plate, making them more rigid. The schematic is empty. There are no components on the plate.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1N4148W | AutoPilot:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D12, D14, D15, D21, D22 |
| 7 | M3 | MountingHole:MountingHole_3.2mm_M3 | 1, 1, M3, M3, M3, M3, M3 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5, R7 |
| 3 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R6 |
| 2 | 2U-VERT | AutoPilot:CHERRY-MX-LED-2X1U | S14, S15 |
| 2 | 5.6k | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | ENCODER-SWITCH | AutoPilot:ROTARY_ENC_PLAIN | S21, S22 |
| 1 | 1U | AutoPilot:CHERRY-MX-LED-1U | S12 |
| 1 | ALT | AutoPilot:CHERRY-MX-LED-1U | S4 |
| 1 | ALT/SEL | AutoPilot:CHERRY-MX-LED-1U | S3 |
| 1 | AUTOPILOT | AutoPilot:CHERRY-MX-LED-1X2U | S10 |
| 1 | CC-Noncommercial | Symbol:Symbol_CC-Noncommercial_CopperTop_Small | CC BY-NC 4.0 |
| 1 | DN | AutoPilot:CHERRY-MX-LED-1U | S8 |
| 1 | Elite-C | keebio:Elite-C-castellated-29pin-holes | U1 |
| 1 | HDG | AutoPilot:CHERRY-MX-LED-1U | S1 |
| 1 | IAS | AutoPilot:CHERRY-MX-LED-1U | S7 |
| 1 | LVL CHG | AutoPilot:CHERRY-MX-LED-1U | S5 |
| 1 | NAV | AutoPilot:CHERRY-MX-LED-1U | S2 |
| 1 | OLED | AutoPilot:1X04 | JP1 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW23 |
| 1 | UP | AutoPilot:CHERRY-MX-LED-1U | S9 |
| 1 | VS | AutoPilot:CHERRY-MX-LED-1U | S6 |
Questions
How big is the AutoPilot PCB?
It measures 100 × 100.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AutoPilot use?
50 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AutoPilot KiCad files?
From the AndrewFischer/AutoPilot repository on GitHub, at the commit this page was made from: the board is AutoPilot.kicad_pcb and its schematic AutoPilot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AutoPilot design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndrewFischer before reusing the design.
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
