2 layers61 × 41.3 mm
Focuser
AndreasFMueller/Focuser
The motor focus driver from starizona is quite feature complete, more so than many other devices, but it is very large and heavy.
24 partsGPL-3.0
2 layers27.9 × 40.6 mm
Tracker
AndreasFMueller/Trackerastronomical tracker device for long exposure photographs with a simple camera
- Size
- 27.9 × 40.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 16
- Pads
- 65
- Tracks, vias
- 164, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 8 Aug 2015
- Updated
- 23 Nov 2015
Overview
Tracker is an open-source printed circuit board by AndreasFMueller, from the AndreasFMueller/Tracker repository on GitHub. It is a 2-layer board of 27.9 × 40.6 mm with 16 parts on 16 nets, routed with 164 tracks and 7 vias.
It is built around the ATTINY85-15M, A4988 and MC78L05ABD. Its parts include 4 connectors, 3 ICs, 2 capacitors, 2 resistors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY85-15M
WQFN-20-EP(4x4)-40℃~+85℃ 16MHz 2.7V~5.5V 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH WQFN-20-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)A4988
UncategorisedALLEGRO
MC78L05ABD
SOIC-8-40℃~+125℃@(Tj) 1 1.7V@(40mA) 100mA 30V 40uV 49dB@(120Hz) 5V 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
16Questions
How big is the Tracker PCB?
It measures 27.9 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tracker use?
16 parts, built around the ATTINY85-15M, A4988 and MC78L05ABD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tracker KiCad files?
From the AndreasFMueller/Tracker repository on GitHub, at the commit this page was made from: the board is hardware/tracker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndreasFMueller before reusing the design.
Similar boards
- 2 layers149.9 × 55.9 mm
- 4 layers179.5 × 128.5 mm
- 2 layers100 × 100 mm
- 2 layers50 × 50 mm
T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133 - 2 layers23 × 45 mm
- 2 layers41.1 × 110.7 mm
- 2 layers
