

Tool
openMSX YM2413 reverse engineering project
- Size
- 71.9 × 39.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 106
- Pads
- 297
- Tracks, vias
- 799, 96
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 5 Feb 2014
- Updated
- 1 May 2020
Overview
Tool is an open-source printed circuit board by andete, from the andete/ym2413 repository on GitHub. It is a 2-layer board of 71.9 × 39.3 mm with 91 parts on 106 nets, routed with 799 tracks and 96 vias.
It is built around the SN74LVC2T45DCU. Its parts include 35 resistors, 16 capacitors, 11 diodes, 11 connectors and 4 ICs. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.
Main components
1README
README.mdym2413
openMSX YM2413 reverse engineering project
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 22 | pretty:0603_S_R | R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R32, R34 |
| 11 | 3k3 | pretty:0603_S_R | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R13 |
| 11 | LED | pretty:0805_LED | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11 |
| 6 | TEST_POINT | pretty:Test_Pad_1mm | P10, P27, P28, P29, P37, P38 |
| 5 | SJ | pretty:Solder_Jumper_1.5mm | JP1, JP2, JP3, JP4, JP5 |
| 4 | 100nF | pretty:0603_S | C2, C3, C5, C17 |
| 3 | FB | pretty:0603_S | L1, L2, L3 |
| 2 | 100 | pretty:0603_S_R | R38, R42 |
| 2 | 100k | pretty:0603_S_R | R31, R35 |
| 2 | 10nF | pretty:0603_S | C8, C10 |
| 2 | 10uF | pretty:1206 | C1, C11 |
| 2 | 15 | pretty:0603_S_R | R12, R14 |
| 2 | 18pF | pretty:0603_S | C4, C6 |
| 2 | 1uF | pretty:0603_S | C7, C9 |
| 2 | 20pF/NC | pretty:0603_S | C15, C16 |
| 2 | 2k2 | pretty:0603_S_R | R15, R16 |
| 2 | 4.7uF | pretty:1206 | C12, C24 |
| 2 | CONN_6 | pretty:PIN_1X6_S | P5, P35 |
| 2 | TACTSW | pretty:BUTTON_ALPS_SMD_5.2mm_SKQG_S | S1, S2 |
| 1 | 1 | pretty:0603_S_R | R11 |
| 1 | 100k/NC | pretty:0603_S_R | R36 |
| 1 | 48Mhz | pretty:CRYSTAL-TXC-8Z-2.5x2 | X1 |
| 1 | CONN_3 | pretty:PIN_1X3 | K1 |
| 1 | CONN_3X2 | pretty:PIN_2X3_ALT_S | P30 |
| 1 | CONN_7 | pretty:PIN_1X7_S | P31 |
| 1 | CRYSTAL | HC-49V | X2 |
| 1 | EFM32GG332 | pretty:TQFP64 | U3 |
| 1 | L | pretty:1206 | L4 |
| 1 | MICRO-USB-AB | pretty:USB-MICRO-B-FCI-10103593-0001LF | J1 |
| 1 | SN74LVC2T45 | pretty:R-PDSO-G8 | U1 |
| 1 | ST-USBLC6-2 | pretty:SOT-23-6L | U2 |
| 1 | YM2413 | pretty:DIL18 | U4 |
More from andete/ym2413
3Similar boards
- 6 layers68.9 × 47.5 mm

Mowi
septentrio-gnss/mowi
Mowi is an Open Source hardware project that combines a compact Septentrio's GNSS receiver mosaic with a wireless ESP32 Wrover module
283 parts35 - 2 layers49.8 × 49.8 mm

IsoUSBRS422
alperyazar/isoUSBRS422
isoUSBRS422 is an isolated USB - RS422/RS485 converter. It is designed using KiCad. Repository includes KiCad project and necessary firmware files.
69 parts10 - 2 layers21.7 × 12.7 mm

- 2 layers139.5 × 153 mm

- 2 layers70 × 82.5 mm

Nuco v kibot test
MicroType-Engineering/nuco-v-kibot-test
+ Designed for the STM32F7 and STM32H7 series + Pin-compatible with NUCLEO-64 boards + Integrated Blackmagic probe
141 parts2 - 2 layers125 × 78.2 mm

RC ESP32 V2
Poent/RC-Snowblower
Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.
84 parts2 - 2 layers142 × 23 mm

Massue bento v4
benkuper/BenTo-Legacy
Legacy repository for the former BenTo-Club project
101 parts1GPL-3.0 - 2 layers52.1 × 125.7 mm

Vent
waterloo-rocketry/flight_instr
Hardware and software development tracking for Waterloo Rocketry's flight instrumentation system.
82 parts1
Questions
How big is the Tool PCB?
It measures 71.9 × 39.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tool use?
91 parts, built around the SN74LVC2T45DCU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tool KiCad files?
From the andete/ym2413 repository on GitHub, at the commit this page was made from: the board is tool/kicad/main/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tool design in my own project?
Its repository states no licence, so its author keeps all rights: ask andete before reusing the design.

