

Motherboard
- Size
- 144.8 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 72
- Pads
- 269
- Tracks, vias
- 1,225, 74
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Jul 2026
- Updated
- 29 Aug 2026
Overview
Motherboard is an open-source printed circuit board by AndersBNielsen, from the AndersBNielsen/Toggle6502 repository on GitHub. It is a 2-layer board of 144.8 × 94 mm with 41 parts on 72 nets, routed with 1,225 tracks and 74 vias.
It is built around the 74HC245D, 74HC132D and 74LS573PC, with the HM62256BLP-7 and NE555P among its other parts. Its parts include 12 resistors, 11 capacitors, 8 ICs, 3 connectors and 2 diodes. It belongs with the computers and single-board computers boards of this library.
Main components
574HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HC132D
SO-14-40℃~+125℃ 1.5V~4.2V 2 21ns@6V,50pF 2V~6V 2uA 3.7V~4.5V、5.2V~6V 300mV~1.2V 4 400mV 5.2mA 5.2mA 74HC Series NAND Gate Schmitt trigger SOIC-14 Logic Gates ROHSNexperiaSpecialty Logic74LS573PC
DIP-200℃~+70℃ 10ns 3ns 4.75V~5.25V 74LS 8 D Latch Tri-State DIP-20 Latches ROHSTexas InstrumentsLatchesHM62256BLP-7
DIP28DIP28 New Arrivals ROHSHITUncategorisedNE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C6, C7, C8, C9 |
| 7 | 4k7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R39, R42, R43, R44, R45, R46 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 2 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R13, R14 |
| 2 | 74HC132 | Package_DIP:DIP-14_W7.62mm_Socket | U3, U9 |
| 2 | 74HC245 | Package_DIP:DIP-20_W7.62mm_Socket | U4, U5 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1, J3 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Alps_RK09Y11_Single_Horizontal | RV1 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C10 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R40 |
| 1 | 1nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R41 |
| 1 | 3k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R51 |
| 1 | 74LS573 | Package_DIP:DIP-20_W7.62mm_Socket | U1 |
| 1 | HM62256BLP | Package_DIP:DIP-28_W15.24mm | U6 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U8 |
| 1 | R6507 | Package_DIP:DIP-28_W15.24mm | U7 |
| 1 | USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J4 |
More from AndersBNielsen/Toggle6502
1- 2 layers144.8 × 94 mm

Similar boards
- 2 layers200.7 × 149.9 mm

- 2 layers160 × 100.3 mm

Z80
dennis9819/Z8C-Homebrew-Computer
To easily develop for my Z80 homebrew system, I designed a simple assempler development environment. This packs the following tasks into one script: zmac assembly object file creation (for xmodem upload) monitor file…
65 parts2 - 2 layers208 × 110 mm

- 4 layers158.8 × 104.1 mm

- 2 layers177.8 × 130.8 mm

- 2 layers78 × 66.5 mm

RAM adapter
trwgQ26xxx/FLT_module_reader
Fiat Lancia Tester modules reader for ROMs preservation
23 parts2 - 4 layers243.8 × 243.8 mm

- 2 layers112.5 × 124.5 mm

Questions
How big is the Motherboard PCB?
It measures 144.8 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motherboard use?
41 parts, built around the 74HC245D, 74HC132D, 74LS573PC and HM62256BLP-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motherboard KiCad files?
From the AndersBNielsen/Toggle6502 repository on GitHub, at the commit this page was made from: the board is motherboard/motherboard.kicad_pcb and its schematic cpuram.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motherboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndersBNielsen before reusing the design.