Einkpicframe
Spritetm/picframe_colepd
A WiFi picture frame allowing for remote photo uploads, using an ESP32-C3 and a 5.6" color E-ink display

A tool with which you can just do gestures in the air which gets registered as volume down, up or skip song, or do anti clock with just one finger to do more stuff!
Smarty is an open-source printed circuit board by Anayjain1129, from the Anayjain1129/Smarty repository on GitHub. It is a 2-layer board of 54.9 × 47.5 mm with 3 parts on 27 nets, routed with 50 tracks and 2 vias.
It is built around the ESP32-C3-WROOM-02-H4. It belongs with the ESP32 and RISC-V boards of this library.
A tool with which you can just do gestures in the air which gets registered as volume down, up or skip song, or do anti clock with just one finger to do more stuff! I tried to make this during fallout! and the firmware was written during fallout although this is just a barebone thing cause writing the firmware without physical hardware is not really possible!
Features:
| Name | Quantity | Cost | Link |
|---|---|---|---|
| PAJ7620 Gesture Sensor | 1 | $0.00 | Self-sourced |
| 1.8" RGB TFT Display | 1 | $0.00 | Self-sourced |
| ESP32-C3 | 1 | $0.00 | Self-sourced |
| PCB | 5 | $20.00 | JLCPCB |
| Screws | 1 | $0.00 | Self-sourced |
Total Cost: 20$ NOTE: the firmware is just a barebone/template made by meee i will still need to work on it when i get the hardware physically
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | ST7735 | PhilsFootprintLibrary:Display_ST7735 | U2 |
| 1 | module_paj7620 | usini_sensors:module_paj7620 | U3 |
Spritetm/picframe_colepd
A WiFi picture frame allowing for remote photo uploads, using an ESP32-C3 and a 5.6" color E-ink display



nepyope/Project-Homunculus
Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.

exico91/SommerESP
A plug and play ESP32-C3 board to control Sommer garage doors


emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
It measures 54.9 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
3 parts, built around the ESP32-C3-WROOM-02-H4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Anayjain1129/Smarty repository on GitHub, at the commit this page was made from: the board is pcb/smarty.kicad_pcb and its schematic pcb/smarty.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Anayjain1129 before reusing the design.