Skip to the content
2 layers356.9 × 131.8 mmThe Clanker, the printed circuit board in 3D

A fully custom 65% mechanical keyboard with 91" oled and rotary encoder

Size
356.9 × 131.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
217
Nets
171
Pads
823
Tracks, vias
1,059, 137
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Jul 2026
Updated
30 Aug 2026

Overview

The Clanker is an open-source printed circuit board by anadskman, from the anadskman/The-Clanker repository on GitHub. It is a 2-layer board of 356.9 × 131.8 mm with 217 parts on 171 nets, routed with 1,059 tracks and 137 vias.

It is built around the SK6812MINI-E. Its parts include 136 diodes, 72 switches, 1 capacitor, 1 resistor and 1 IC. It belongs with the lEDs and displays and keyboards and input boards and the RP2040 boards of this library.

Main components

1

README

README.md

The Clanker

The Clanker is a fully custom mechanical keyboard designed from scratch using KiCad for the electronics and Fusion 360 for the case. The goal of this project was to design every part of the keyboard myself, from the schematic and PCB layout to the enclosure and firmware.

The keyboard features a compact 68-key layout, per-key RGB lighting, a rotary encoder, and a 0.91" OLED display, all powered by a Raspberry Pi Pico.

Features

  • 68-key custom layout

  • Raspberry Pi Pico (USB-C)

  • MX switches

  • Per-key SK6812 MINI-E RGB lighting

  • Rotary encoder

  • 0.91" I²C OLED display

  • Custom 3D-printable case

  • Designed entirely from scratch

Design Process

The project began by creating the keyboard layout and designing the schematic in KiCad. After assigning footprints, the PCB was laid out and routed, including the switch matrix, RGB LEDs, OLED display, rotary encoder, and power circuitry. Once the PCB was complete, it was exported into Fusion 360 where the enclosure was designed around it. The case was built specifically for 3D printing and split into two halves so it could fit on a smaller print bed while remaining rigid once assembled.

BOM

ItemQtyNotes$URL
Raspberry Pi Pico1RP2040 microcontroller9.23link
MX Mechanical Switches68Cherry MX compatible30.22link
PCB Mount Stabilizers4For larger keys11.23link
LEDs68One per switch8.68link
Keycap Set168-key compatible24.17link
Rotary Encoder1EC119.84link
Encoder Knob1Fits encoder shaft1.76link
OLED Display1.91" I2C (SSD1306)1.44link
PCB1Custom keyboard PCB61.97link
Shipping5.71
Dutes8.27
Total109.56

Gallery

PCBSchematicCAD Model
Screenshot 2026-07-08 183934Screenshot 2026-07-08 184029image

Parts

217
QtyValueFootprintReferences
681N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52
68SK6812MINI-ELED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMountLED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +52
68SW_PushPCM_marbastlib-mx:SW_MX_1uSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +52
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
2MX_stabPCM_marbastlib-mx:STAB_MX_2.25uS2, S3
1100µFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
1330ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU1
1MX_stabPCM_marbastlib-mx:STAB_MX_6.25uS4
1MX_stabPCM_marbastlib-mx:STAB_MX_2uS1
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_THTA1
1RotaryEncoder_SwitchPCM_marbastlib-various:ROT_Alps_EC11E-SwitchEC1

Similar boards

  • 4 layers234 × 84 mmMain panel, the printed circuit board in 3D

    Main panel

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    234 parts3kApache-2.0
  • 4 layers180.8 × 300.3 mmDilemma, the printed circuit board in 3D

    Dilemma

    Bastardkb/Dilemma

    The Dilemma is a vertical stagger low-profile keyboard with mods.

    383 parts590
  • 4 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    106 parts575GPL-2.0
  • 2 layersDemo, the printed circuit board in 3D

    Demo

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    48 parts547GPL-3.0
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    62 parts517GPL-2.0
  • 4 layers82.5 × 39.4 mmV4head, the printed circuit board in 3D

    V4head

    makerforgetech/modular-biped

    An open source framework for creating a bipedal modular companion robot.

    26 parts493GPL-3.0
  • 2 layers115.7 × 95.7 mmFifi split keeb, the printed circuit board in 3D

    Fifi split keeb

    raychengy/fifi_split_keeb

    Fifi Keyboard 🐶 ⌨️

    66 parts334
  • 4 layers70 × 54 mmPicoLab, the printed circuit board in 3D

    PicoLab

    CoretechR/PicoLab

    Web-GUI Embedded Multitool

    285 parts327GPL-3.0

Questions

How big is the The Clanker PCB?

It measures 356.9 × 131.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the The Clanker use?

217 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the The Clanker KiCad files?

From the anadskman/The-Clanker repository on GitHub, at the commit this page was made from: the board is PCB/the-clanker.kicad_pcb and its schematic PCB/the-clanker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the The Clanker design in my own project?

Its repository states no licence, so its author keeps all rights: ask anadskman before reusing the design.