Skip to the content
2 layers103.5 × 41.4 mmABD v01, the printed circuit board in 3D

Open-source 2P 18650 power bank hardware by Ampnics.

Size
103.5 × 41.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
15
Pads
77
Tracks, vias
59, 182
Pours
10
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 Oct 2026
Updated
16 Oct 2026

Overview

ABD v01 is an open-source printed circuit board by ampnics, from the ampnics/AmpBatt-Dock-2p repository on GitHub. It is a 2-layer board of 103.5 × 41.4 mm with 28 parts on 15 nets, routed with 59 tracks and 182 vias.

It is built around the IP5306 and BK-18650-PC4. Its parts include 9 capacitors, 5 resistors, 4 diodes, 3 connectors and 1 IC. It belongs with the power boards of this library.

Main components

2

README

README.md

AmpBatt Dock-2p

An open source 2×18650 power bank designed by the Ampnics community.

Screenshot 2026-10-16 210119
Hardware revisionv0.1.0 (October 2026)
DesignerMd Ammar Maniyar, Ampnics
Design toolKiCad 10
StatusPrototype, not yet tested

Overview

AmpBatt Dock-2p is a compact power bank board built around the IP5306 charge-and-boost power management IC. It holds two 18650 lithium-ion cells in a PCB-mounted holder, charges them over USB-C and supplies 5 V to devices through a USB-A port.

Screenshot 2026-10-16 205949 Screenshot 2026-10-16 210016

Features

  • Output: 5 V DC, up to 2.4 A through a USB-A connector
  • Charging input: USB-C receptacle, power only (5.1 kΩ CC resistors)
  • Battery: 2 × 18650 cells (BK-18650-PC holder, cells in parallel)
  • Switching frequency: 500 kHz boost converter with a 1 µH inductor
  • Charge indicator: 4 LEDs showing about 25 %, 50 %, 75 % and 100 %
  • User control: push button for wake-up / output on-off (SW1)
  • Expansion: 2-pin header (J3), This can powerup any 5V

Repository layout

PathContents
ABD_v01.kicad_proKiCad project file
ABD_v01.kicad_schSchematic
ABD_v01.kicad_pcbPCB layout
eeschema/Schematic-related files
ext lib/External symbol and footprint libraries
ext 3d/3D models
docs/Documentation and images

Getting started

  1. Install KiCad 10 or newer.
  2. Clone this repository:
bash
   git clone https://github.com/ampnics/AmpBatt-Dock-2p.git
  1. Open ABD_v01.kicad_pro in KiCad.
  2. If symbols, footprints or 3D models show as missing, check Preferences → Manage Symbol/Footprint Libraries and make sure paths use ${KIPRJMOD}.

Manufacturing

Gerber and drill files are published under Releases for each hardware version. Suggested PCB settings: Keep it defualt manufacturing setting.

Safety warning

This design charges and discharges lithium-ion cells. Incorrect assembly, damaged cells, short circuits or poor cell quality can cause fire or injury.

  • Use only protected, genuine 18650 cells from a reputable source.
  • Never leave charging batteries unattended.
  • This is an early prototype and comes with no warranty.
  • Build and use it at your own risk.

Contributing

Issues and pull requests are welcome. Please describe what you changed and why, and which hardware revision it applies to.

© 2026 Ampnics community

Parts

28
QtyValueFootprintReferences
622uFCapacitor_SMD:C_0805_2012MetricC1, C3, C5, C6, C7, C8
4LEDLED_SMD:LED_0805_2012MetricD1, D2, D3, D4
210uFCapacitor_SMD:C_0805_2012MetricC2, C4
25K1Resistor_SMD:R_0603_1608MetricR1, R2
10.5RResistor_SMD:R_0805_2012MetricR5
110KResistor_SMD:R_0805_2012MetricR4
11uFCapacitor_SMD:C_0805_2012MetricC9
11uHInductor_SMD:L_Bourns_SRP7028A_7.3x6.6mmL1
12RResistor_SMD:R_0805_2012MetricR3
1BK-18650-PC4BK-18650-PC4:BAT_BK-18650-PC4BT1
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1IP5306IP5306:SOP127P600X165-9NU1
1LOGOLogos:ampnics_full_10x10mm.kicad_symG***
1SW_PushButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFSSW1
1USB_AConnector_USB:USB_A_Stewart_SS-52100-001_HorizontalJ2
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_HorizontalJ1

The 26 most common of 28 parts.

Similar boards

  • 2 layers80 × 80 mmKubisat power v2, the printed circuit board in 3D

    Kubisat power v2

    gredzikk/kubisat

    Hardware and software of cubesat model for engineering thesis

    82 parts2MIT
  • 2 layers54 × 100 mmChatter charger, the printed circuit board in 3D

    Chatter charger

    Racer159/chatter-charger

    A LiIon/LiFePo/NiMH Charger Backpack for the CircuitMess Chatter v2

    30 parts1
  • 2 layers204 × 78 mmBatteryPack, the printed circuit board in 3D

    BatteryPack

    donnels/aiwa-pb-3

    Alternatives for an Aiwa PB-3 lead acid battery

    48 parts
  • 4 layers88 × 94.5 mmInspireFly EPS, the printed circuit board in 3D

    InspireFly EPS

    inspireFly-VT/inspireFly-EPS

    inspireFly's custom EPS made for development of an open CubeSat architecture.

    123 parts
  • 4 layers101.6 × 101.6 mmSimple Polaroid Trigger, the printed circuit board in 3D

    Simple Polaroid Trigger

    JWehle/polaroid-trigger

    Automated trigger board for a polaroid SX-70 type camera.

    80 partsApache-2.0
  • 2 layers100 × 150 mmPerancangan, the printed circuit board in 3D

    Perancangan

    komprinat/Smart-voice-assistant-with-Gemini-AI-using-ESP32

    My final project for getting a diploma in Politeknik Negeri Padang

    13 parts
  • 2 layers202.6 × 80 mmBlancing power, the printed circuit board in 3D

    Blancing power

    SagiK-Repository/Balancer

    balancer 만들기

    12 parts

Questions

How big is the ABD v01 PCB?

It measures 103.5 × 41.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ABD v01 use?

28 parts, built around the IP5306 and BK-18650-PC4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ABD v01 KiCad files?

From the ampnics/AmpBatt-Dock-2p repository on GitHub, at the commit this page was made from: the board is ABD_v01.kicad_pcb and its schematic ABD_v01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ABD v01 design in my own project?

Its repository states no licence, so its author keeps all rights: ask ampnics before reusing the design.