

Distress call robot
repo for holding my free lance work
- Size
- 51.5 × 60.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 49
- Pads
- 87
- Tracks, vias
- 167, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Jun 2024
- Updated
- 13 Aug 2026
Overview
Distress call robot is an open-source printed circuit board by ambadran, from the ambadran/Free-Lance-Projects repository on GitHub. It is a 2-layer board of 51.5 × 60.5 mm with 15 parts on 49 nets, routed with 167 tracks and 0 vias.
It is built around the L293D and L7805. Its parts include 2 ICs, 1 capacitor and 1 switch. It belongs with the robots and motor control boards of this library.
Main components
2L293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor DriverL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | MAX9814-1, MAX9814-2, MAX9814-3 |
| 3 | JST2P | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | BATin1, M1, M2 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3 |
| 2 | Conn_01x20_Socket | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | RaspberryPiPicoW_Left1, RaspberryPiPicoW_Right1 |
| 1 | 330uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | SW_Push | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | SW1 |
More from ambadran/Free-Lance-Projects
11- 2 layers93.7 × 103.5 mm

- 2 layers165.2 × 114.6 mm

Web controlled relay board v2.0
ambadran/Free-Lance-Projects
repo for holding my free lance work
71 parts - 2 layers63.9 × 77.9 mm

- 2 layers44.5 × 64.8 mm

- 2 layers86.8 × 64.1 mm

- 2 layers86.8 × 63.8 mm

- 2 layers90.9 × 52.4 mm

- 2 layers70.8 × 55.9 mm

- 2 layers91.9 × 55.6 mm

Product display stepper speaker
ambadran/Free-Lance-Projects
repo for holding my free lance work
20 parts - 2 layers100 × 70 mm

- 2 layers33.5 × 48.8 mm

Similar boards
- 2 layers100 × 100 mm

Flipdot H Bridge
comakingspace/FlipDotDisplay
They were bought at the Makerfaire Hannover 2016.
76 parts3 - 2 layers136.5 × 185 mm

- 2 layers72.2 × 53.6 mm

- 2 layers76.2 × 94 mm

Sumo
Yourself1011/sumo-bot
The code for Li Feng Yin and Daniel Zhang's sumo robot, for TEJ3MI
57 parts2 - 2 layers82 × 81 mm

- 2 layers30.7 × 57.8 mm

Openturret hat
mrpossoms/openturret
Opensource designs and software for autonomously aiming gimble
8 parts1 - 2 layers73.9 × 42.4 mm

- 2 layers75.7 × 59.4 mm

Questions
How big is the Distress call robot PCB?
It measures 51.5 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Distress call robot use?
15 parts, built around the L293D and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Distress call robot KiCad files?
From the ambadran/Free-Lance-Projects repository on GitHub, at the commit this page was made from: the board is distress_call_robot/Circuit/Circuit.kicad_pcb and its schematic distress_call_robot/Circuit/Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Distress call robot design in my own project?
Its repository states no licence, so its author keeps all rights: ask ambadran before reusing the design.