Skip to the content
2 layers99 × 54.9 mmEx arc, the printed circuit board in 3D

Addy's Railroad Company

Size
99 × 54.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
58
Pads
259
Tracks, vias
38, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Sep 2026
Updated
29 Sep 2026

Overview

Ex arc is an open-source printed circuit board by alxhub, from the alxhub/arc repository on GitHub. It is a 2-layer board of 99 × 54.9 mm with 59 parts on 58 nets, routed with 38 tracks and 0 vias.

It is built around the ARDUINO UNO R3, ISO1044BD and ISO1430DW, with the R-78E5.0-0.5, 74LVC1G3157 and AP2112K-3.3 among its other parts. Its parts include 16 capacitors, 9 resistors, 3 ICs, 2 diodes and 1 inductor. It belongs with the STM32 and AVR (ATmega, ATtiny) boards of this library.

Main components

8

README

trackside/trk-tbl-01xK/README.md

ARC-TRK-TBL-01xK

ARC-TRK-TBL-01xK is the trackside controller for a Kato turntable. It connects to an ARC track hub over a LIN cable, moves the bridge, operates its lock, and counts the turntable's index contact as the bridge passes each stop. A homing sensor port can establish an absolute starting position.

The rails on the moving bridge receive power from a separate ARC district. This board passes that pair to the Kato cable and reports whether the feed is active. The controller does not drive the track rails.

An expansion port can host a nearby angle sensor or other I²C accessory.

Board design PCB layout

Parts

59
QtyValueFootprintReferences
9100nFC_0402_1005MetricC3, C5, C7, C8, C11, C12, C14, C15, C16
7TestPointTestPoint_Pad_D1.5mmCAN_RX, CAN_TX, DCC_DE, DCC_RX, DCC_TX, HSE, LNK+
4MountingHoleMountingHole_3.5mmH1, H2, H3, H4
34.7µFC_1210_3225MetricC4, C10, C13
3FiducialFiducial_1mm_Mask2mmFID1, FID2, FID3
210kΩR_0402_1005MetricR3, R7
21µFC_0402_1005MetricC1, C2
2620ΩR_0402_1005MetricR8, R9
2RJ45RJ45_Amphenol_54602-x08_HorizontalLNK1, LNK2
2TestPointTestPoint_Loop_D2.50mm_Drill1.0mmGND, LNK-
2greenLED_0805_2012MetricLNK, REG
2redLED_0805_2012MetricD1, D2
1100kΩR_0402_1005MetricR5
110µFC_1210_3225MetricC9
115µHL_Bourns-SRN4018L1
11µFC_1210_3225MetricC6
12kΩR_0402_1005MetricR4
1300ΩR_0805_2012MetricR2
133ΩR_0402_1005MetricR6
140MHzOscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mmY1
1680ΩR_0402_1005MetricR1
174LVC1G3157SOT-363_SC-70-6U3
1AP2112K-3.3SOT-23-5U1
1Arduino_UNO_R3Arduino_UNO_R3_SocketSHIELD
1Arduino_UNO_R3Arduino_UNO_R3_PinsCSB1
1Conn_01x05PinHeader_1x05_P2.54mm_VerticalSWD
1FODM217ASOP-4_4.4x2.6mm_P1.27mmU2
1ISO1044BDSOIC-8_3.9x4.9mm_P1.27mmCAN
1ISO1430DWSOIC-16W_7.5x10.3mm_P1.27mmDCC_SYNC
1R-78E5.0-0.5Converter_DCDC_RECOM_R-78E-0.5_THTLNK_BUCK
1STM32C092CBTxLQFP-48_7x7mm_P0.5mmSTM32

More from alxhub/arc

12
  • 4 layers90 × 70 mmDst-01x8, the printed circuit board in 3D

    Dst-01x8

    alxhub/arc

    Addy's Railroad Company

    243 parts
  • 4 layers90 × 70 mmDst-01x6, the printed circuit board in 3D

    Dst-01x6

    alxhub/arc

    Addy's Railroad Company

    216 parts
  • 4 layers90 × 70 mmDst-01x4, the printed circuit board in 3D

    Dst-01x4

    alxhub/arc

    Addy's Railroad Company

    172 parts
  • 4 layers90 × 70 mmYrd-01x8, the printed circuit board in 3D

    Yrd-01x8

    alxhub/arc

    Addy's Railroad Company

    151 parts
  • 4 layers90 × 70 mmTrk hub-01, the printed circuit board in 3D

    Trk hub-01

    alxhub/arc

    Addy's Railroad Company

    121 parts
  • 4 layers90 × 70 mmPsu-01, the printed circuit board in 3D

    Psu-01

    alxhub/arc

    Addy's Railroad Company

    97 parts
  • 2 layers50 × 50 mmTrk srv-01, the printed circuit board in 3D

    Trk srv-01

    alxhub/arc

    Addy's Railroad Company

    89 parts
  • 4 layers70 × 50 mmTrk trn-01, the printed circuit board in 3D

    Trk trn-01

    alxhub/arc

    Addy's Railroad Company

    82 parts
  • 4 layers50 × 50 mmTrk led-01, the printed circuit board in 3D

    Trk led-01

    alxhub/arc

    Addy's Railroad Company

    80 parts
  • 4 layers50 × 50 mmTrk tbl-01xK, the printed circuit board in 3D

    Trk tbl-01xK

    alxhub/arc

    Addy's Railroad Company

    73 parts
  • 4 layers65 × 56.5 mmHat-01, the printed circuit board in 3D

    Hat-01

    alxhub/arc

    Addy's Railroad Company

    69 parts
  • 2 layers50 × 50 mmTrk nfc-01, the printed circuit board in 3D

    Trk nfc-01

    alxhub/arc

    Addy's Railroad Company

    62 parts

Similar boards

  • 2 layers69.1 × 53.8 mmCANShield, the printed circuit board in 3D

    CANShield

    uvmaero/AERO-Boards-KiCad

    UVM AERO boards.

    23 parts3
  • 6 layers100 × 160 mmOWNVERTER, the printed circuit board in 3D

    OWNVERTER

    owntech-foundation/OWNVERTER

    The OwnVerter is an open-source 3-phase power converter that can be used to control multiple types of motors and is compatible with different types of sensors.

    474 parts16
  • 4 layers33 × 90 mmActive drag system, the printed circuit board in 3D

    Active drag system

    RocketryVT/active-drag-system

    Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.

    100 parts6MIT
  • 2 layers121.3 × 111.8 mmBIT3, the printed circuit board in 3D

    BIT3

    I-Sys-UF/BIT3_PCB

    KiCad 7.0.x にて設計

    51 parts
  • 2 layers90 × 56 mmLogic, the printed circuit board in 3D

    Logic

    nodevuser197/astobot-logic

    177 parts
  • 2 layers90 × 98 mmAstobot panel, the printed circuit board in 3D

    Astobot panel

    nodevuser197/astobot-panel

    281 parts

Questions

How big is the Ex arc PCB?

It measures 99 × 54.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ex arc use?

59 parts, built around the ARDUINO UNO R3, ISO1044BD, ISO1430DW and R-78E5.0-0.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ex arc KiCad files?

From the alxhub/arc repository on GitHub, at the commit this page was made from: the board is backbone/ex-arc/ex-arc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ex arc design in my own project?

Its repository states no licence, so its author keeps all rights: ask alxhub before reusing the design.