
Trailmap
katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)

Watch is an open-source printed circuit board by alx-alexpark, from the alx-alexpark/watch repository on GitHub. It is a 6-layer board of 47.3 × 35.5 mm with 65 parts on 102 nets, routed with 453 tracks and 501 vias.
It is built around the TPS63802DLAR, W25Q128JVSIQ and BQ24074RGTR, with the MAX-M10S, RV-3028-C7 and TPS2116DRL among its other parts. Its parts include 26 capacitors, 16 resistors, 9 ICs, 4 inductors and 3 connectors. It belongs with the wearables boards and the nRF52 and nRF5x boards of this library.
A nRF52840-based smartwatch that synchronizes its time from GPS satelites, featuring a waterproof enclosure and month-long battery life.
Commonly used time synchronization methods such as NTP commonly used by smartwatches only provide accuracy of around 5-50ms, which is honestly not that good. GPS time is accurate to 10-50 nanoseconds, which is very good. I also care a lot about privacy so I wanted to make an air-gapped smartwatch that still is able to get very accurate time.
First, install CircuitPython, then copy over the firmware python file. Install the appropriate libraries using Thonny's packages tool, and then the watch should display the time!
View PCB/Schematics on KiCanvas
View CAD on OnShape
| Value | Qty | Link | Unit Price (USD) | Ext Price (USD) |
|---|---|---|---|---|
| DSGP.1575.18.4.A.02 | 1 | Digikey | 6.4400 | 6.4400 |
| Adafruit Wireless Chg Module | 1 | Digikey | 14.9500 | 14.9500 |
| 100nF | 9 | C1525 | 0.0027 | 0.0243 |
| 100pF | 1 | C1546 | 0.0020 | 0.0020 |
| 12pF | 2 | C1547 | 0.0036 | 0.0072 |
| 47nF | 1 | C1622 | 0.0087 | 0.0087 |
| red | 1 | C2286 | 0.0073 | 0.0073 |
| green | 1 | C2297 | 0.0163 | 0.0163 |
| USBLC6-2SC6 | 1 | C7519 | 0.1540 | 0.1540 |
| 4.7uF | 5 | C19666 | 0.0218 | 0.1090 |
| 1.13k | 1 | C22833 | 0.0017 | 0.0017 |
| nRF52840 | 1 | C23186 | 0.0018 | 0.0018 |
| 100k | 1 | C25741 | 0.0011 | 0.0011 |
| 10k | 3 | C25744 | 0.0028 | 0.0084 |
| 1.5k | 4 | C25867 | 0.0011 | 0.0044 |
| 22uF | 1 | C45783 | 0.0955 | 0.0955 |
| 1uF | 5 | C52923 | 0.0176 | 0.0880 |
| BQ24074RGT | 1 | C54313 | 2.4298 | 2.4298 |
| RV-3028-C7 | 1 | C3019759 | 2.1859 | 2.1859 |
| 1A/1.8A | 1 | C70082 | 0.0487 | 0.0487 |
| 10uH | 2 | C88182 | 0.0545 | 0.1090 |
| 10uF | 1 | C96446 | 0.0536 | 0.0536 |
| 15nH | 1 | C98055 | 0.0666 | 0.0666 |
| 1 | C127355 | 0.2870 | 0.2870 | |
| LiPo (JST-PH Connector) | 1 | C295747 | 0.2055 | 0.2055 |
| TPS63802DLAR | 1 | C2845237 | 1.0065 | 1.0065 |
| 91k | 1 | C2906973 | 0.0009 | 0.0009 |
| 4.12k | 2 | C2930007 | 0.0010 | 0.0020 |
| 511k | 1 | C2930114 | 0.0016 | 0.0016 |
| USB_C_Receptacle_USB2.0_14P | 1 | C2988369 | 0.0878 | 0.0878 |
| 1.18k | 1 | C3016052 | 0.0005 | 0.0005 |
| TPS2116DRL | 1 | C3235557 | 0.4576 | 0.4576 |
| MAX-M10S | 1 | C4153167 | 10.0464 | 10.0464 |
| 46.4k | 1 | C5126026 | 0.0010 | 0.0010 |
| 32MHz | 1 | C5441424 | 0.4352 | 0.4352 |
| 0.47uH | 1 | C18221164 | 1.8969 | 1.8969 |
| TPS7A20xxxDQN | 1 | C46459900 | 0.3205 | 0.3205 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C6, C7, C8, C9, C15, C25, C27, C28, C30 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C13, C18, C19, C21, C26 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C10, C11, C12, C22 |
| 4 | 1.5k | Resistor_SMD:R_0402_1005Metric | R7, R8, R11, R12 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R18 |
| 2 | 10uH | Inductor_SMD:L_0805_2012Metric | L1, L2 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 4.12k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 0.47uH | JLCImport:XFL4015-471MEC | L4 |
| 1 | 1.13k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1.18k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 15nH | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 1A/1.8A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 46.4k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 511k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 91k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | Adafruit Wireless Chg Module | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | BQ24074RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U6 |
| 1 | DSGP.1575.18.4.A.02 | antrenna:XCVR_DSGP.1575.18.4.A.02 | AE1 |
| 1 | Debug Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LiPo | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | MAX-M10S | RF_GPS:ublox_MAX | U3 |
| 1 | RV-3028-C7 | Package_SON:MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U8 |
| 1 | TPS2116DRL | Package_TO_SOT_SMD:SOT-583-8 | U9 |
| 1 | TPS63802DLAR | JLCImport:TPS63802DLAR | U4 |
| 1 | TPS7A20xxxDQN | Package_SON:Texas_X2SON-4_1x1mm_P0.65mm | U5 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U10 |
| 1 | green | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | nRF52840 | Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mm | U1 |
| 1 | red | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | ~ | JLCImport:5034801000 | DS1 |

katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)

SirioGuy/uClock
Powered by the ESP32-C3, μClock includes an ultra-precise real-time clock that automatically corrects itself via NTP servers, ensuring it's always perfectly on time.

aliaksei-lameyka/ENKU-Clock
Open, repairable, local-first e-paper alarm clock.



abdullahwaqar/s3-motion-logger
ESP32-S3 motion logging board. It logs 6-axis IMU data to a microSD card and streams it over USB, BLE or Wi-Fi. It runs from a single-cell LiPo and charges over USB-C.

aravindd3/lora-based-communication-system
LoRa-based push-to-talk voice communication device using ESP32 and SX1278.

It measures 47.3 × 35.5 mm and has 6 copper layers, 1.6 mm thick.
65 parts, built around the TPS63802DLAR, W25Q128JVSIQ, BQ24074RGTR and MAX-M10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alx-alexpark/watch repository on GitHub, at the commit this page was made from: the board is pcb/watch.kicad_pcb and its schematic pcb/display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask alx-alexpark before reusing the design.