

Macropad
- Size
- 86.3 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 94
- Pads
- 389
- Tracks, vias
- 683, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241228)
- Created
- 25 Jan 2025
- Updated
- 19 Mar 2025
Overview
Macropad is an open-source printed circuit board by alx-alexpark, from the alx-alexpark/macropad repository on GitHub. It is a 2-layer board of 86.3 × 100 mm with 101 parts on 94 nets, routed with 683 tracks and 54 vias.
It is built around the RP2040, W25Q128JVSIQ and AMS1117-3.3, with the SN74LVC1T45DBV, 1N4148WS and SK6812MINI-E among its other parts. Its parts include 37 diodes, 18 switches, 16 resistors, 13 capacitors and 4 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
8RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LVC1T45DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)TM30N03ADF
DFN3x3-8-55℃~+150℃ 1 N-channel 1.5V 15W 30A 30V 8.4nC@4.5V 816pF 82.6pF 8mΩ@10V DFN3x3-8 MOSFETs ROHSTritech-MOSMOSFETsTS-1089S-02526
SMD-4P,4.2x3.3mm100,000 cycles 12V 2.5mm 2.6N 3.25mm 4.2mm 50mA Oval Button SMD(SMT) Tab SPST Surface Mount,Vertical White Without Bracket SMD-4P,4.2x3.3mm Tactile Switches ROHSXUNPUTactile Switches
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1N4148WS | Diode_SMD:D_SOD-323F | D2, D3, D4, D5, D6, D7, D8, D9, D11, D12, D13, D14, D16, D17, D18, D19 |
| 16 | Cherry MX Blue | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 |
| 16 | SK6812MINI | cheyao macropad main PCB-third_party_neopixel.petty:SK6812MINI-E | D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R8, R12, R13, R14, R15 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C7, C10, C11 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C8, C13 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R9, R11 |
| 3 | D_TVS | Diode_SMD:D_SOD-923 | D15, D20, D21 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C9, C12 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 27.4 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D10 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 500ma/1A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Buzzer | easyeda2kicad:BUZ-SMD_4P-L8.5-W8.5-P8.50-BR | LS1 |
| 1 | Conn_01x03 | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J2 |
| 1 | Conn_01x04_Socket | easyeda2kicad:OLED-TH_L38.0-W12.0_HS91L02W2C01 | J3 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | LED_Filled | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | RotaryEncoder_Switch | easyeda2kicad:SW-TH_EC11XXXXXXXX | SW1 |
| 1 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | TM30N03ADF | easyeda2kicad:WDFN-5_L3.3-W3.3-P0.65-BL | Q1 |
| 1 | TS-1089S-02526 | easyeda2kicad:SW-SMD_4P-L4.2-W3.3-P2.15-LS5.1 | SW2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Vibration Motor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
Similar boards
- 4 layers55 × 55 mm

- 2 layers86 × 50 mm

- 2 layers84.2 × 100 mm

Fabpack out v5 8
yuz207/agentpad13
agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)
126 parts41 - 2 layers393.7 × 138.3 mm

THE KEYBOARD
Gusus169/INERTIA-102-The-Mechanical-Keyboard
A custom Mechanical keyboard featuring an embedded RP2040 processor, hot-swap sockets, 1800 layout, full RGB and much more!
481 partsMIT - 4 layers90 × 100 mm

- 2 layers21 × 51 mm

Stasis Devboard Rapico
yassin-v2/Rapico
A RP2040-based development board with nRF wireless designed in the Raspberry Pi Pico form factor, called the Rapico.
56 partsMIT - 2 layers120 × 102.5 mm

Dsug cctv BOARD
LucasLHenry/spelltwister
This is the third version of the code for the Spelltwister module with CCTV. This version uses the Arduino platform and the RP2040, a chip developed by Raspberry Pi for their RPi Pico board.
251 partsMIT - 2 layers290.5 × 116.7 mm

Keeby60v2
minhazislamnafi/KEEBY60-20
A moduler 60% mechanical hot-swapble keyboard. With 20% numpad attachment will form a proper 80% keyboard
237 partsCERN-OHL-S-2.0
Questions
How big is the Macropad PCB?
It measures 86.3 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Macropad use?
101 parts, built around the RP2040, W25Q128JVSIQ, AMS1117-3.3 and SN74LVC1T45DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macropad KiCad files?
From the alx-alexpark/macropad repository on GitHub, at the commit this page was made from: the board is macropad.kicad_pcb and its schematic macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macropad design in my own project?
Its repository states no licence, so its author keeps all rights: ask alx-alexpark before reusing the design.