
QL ROM Cartridge original
alvaroalea/QL_Rom_Cartridge
Schematic, PCB and other stuff to make ROM Cartridge for use with Sinclair QL Computer

Schematic, PCB and other stuff to make ROM Cartridge for use with Sinclair QL Computer
8full roms is an open-source printed circuit board by alvaroalea, from the alvaroalea/QL_Rom_Cartridge repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 38.6 × 60.7 mm with 9 parts on 42 nets, routed with 238 tracks and 17 vias.
It is built around the 74LS00SC. Its parts include 3 resistors, 2 capacitors, 2 ICs, 1 connector and 1 switch. It belongs with the retro computing and games boards of this library.
Schematic, PCB and other stuff to make ROM Cartridge for use with Sinclair QL Computer
(C) 2022 Alvaro Alea Fdz.
License under: CERN Open Hardware Licence Version 2 - Strongly Reciprocal
https://ohwr.org/cern_ohl_s_v2.txt
Remenber that when using my jerber files with JLCPCB you shall mark the option to specify the Order Number (no cost) to avoid the text JLCJLCJLCJLC in the skilscreen.

This folder contain the schematic of the original Sinclair cartridge as far as i can get from pictures from internet.

It also contains 3D pieces to do vacum form of the case
STATUS
This version need a 16Kb eprom, and is intended as a replacement of Toolkit II cartridge an others.

This version need a 64Kb eprom, and is intended to replace the internal ROM of the QL.
Is very important to remove the 2 ROM chips from the QL before use.
Be aware that this lock the rom cartridge, and the QL will not work without it.

The 8full_rom is a version of full_rom with 3 switch to allow 8 diferent version of the ROM of the QL.
Is very important to remove the 2 ROM chips from the QL before use.
Be aware that this lock the rom cartridge, and the QL will not work without it.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3 |
| 2 | C | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2 |
| 1 | 27C512 | Package_DIP:DIP-32_W15.24mm_LongPads | IC2 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | IC3 |
| 1 | QL_cartridge_ROM | 8bits:CART_QL_EDGE | J1 |
| 1 | SW_DIP_x03 | Button_Switch_THT:SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm | SW1 |

alvaroalea/QL_Rom_Cartridge
Schematic, PCB and other stuff to make ROM Cartridge for use with Sinclair QL Computer

alvaroalea/QL_Rom_Cartridge
Schematic, PCB and other stuff to make ROM Cartridge for use with Sinclair QL Computer

alvaroalea/QL_Rom_Cartridge
Schematic, PCB and other stuff to make ROM Cartridge for use with Sinclair QL Computer

jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos


Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

tjboldt/Apple2-IO-RPi
Apple II expansion card using a Raspberry Pi for I/O


It measures 38.6 × 60.7 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the 74LS00SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the alvaroalea/QL_Rom_Cartridge repository on GitHub, at the commit this page was made from: the board is 8full_roms/8full_roms.kicad_pcb and its schematic 8full_roms/8full_roms.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).