2 layers96.6 × 82.8 mm
2 layers28.8 × 18.2 mm
RaspberryPiHat Board
Alphamm1/FirstPCBdesign- Size
- 28.8 × 18.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 17
- Pads
- 36
- Tracks, vias
- 78, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 May 2022
- Updated
- 29 May 2022
Overview
RaspberryPiHat Board is an open-source printed circuit board by Alphamm1, from the Alphamm1/FirstPCBdesign repository on GitHub. It is a 2-layer board of 28.8 × 18.2 mm with 10 parts on 17 nets, routed with 78 tracks and 2 vias.
It is built around the DHT11. Its parts include 4 resistors, 2 diodes, 1 IC, 1 connector and 1 switch.
Main components
1Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | LED | LEDs:LED_0805_HandSoldering | D1, D2 |
| 1 | DHT11 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | SW_DPST | freetronics_footprints:SW_PUSHBUTTON_PTH | SW1 |
The 9 most common of 10 parts.
Questions
How big is the RaspberryPiHat Board PCB?
It measures 28.8 × 18.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RaspberryPiHat Board use?
10 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RaspberryPiHat Board KiCad files?
From the Alphamm1/FirstPCBdesign repository on GitHub, at the commit this page was made from: the board is RaspberryPiHat Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RaspberryPiHat Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alphamm1 before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5