2 layers24.9 × 29.7 mm
QMBTv1
glina126/QMBT_copter
A simple, yet versatile quadcopter controller and code. Based on the Arduino platform using the Atmega328p and MPU6050.
42 parts3MIT
2 layers15.2 × 29.2 mm
RH2288 PWM
alphaarea/RH2288V2_FAN_Controller1Limit the annoying fan speed, made it possible to be a quite homeserver.
- Size
- 15.2 × 29.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 27
- Pads
- 62
- Tracks, vias
- 77, 5
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Mar 2020
- Updated
- 25 Mar 2020
Overview
RH2288 PWM is an open-source printed circuit board by alphaarea, from the alphaarea/RH2288V2_FAN_Controller repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 15.2 × 29.2 mm with 9 parts on 27 nets, routed with 77 tracks and 5 vias.
It is built around the ATMEGA328P-MMH. Its parts include 4 connectors, 2 capacitors, 2 ICs and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdRH2288V2 FAN Controller
RH2288V2 风扇控制器
Base on Arduino
Limit the annoying fan speed, made it possible to be a quite homeserver.
Compatibility
- Huawei Tecal RH2285 V2
- Huawei Tecal RH2285H V2
- Huawei Tecal RH2288 V2
- Huawei Tecal RH2288H V2
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 78L05_SOT23 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | ATmega328P-MMH | Package_DFN_QFN:QFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm | U2 |
| 1 | AVR_ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_FANs | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | Conn_RH2288_V2 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J4 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
Questions
How big is the RH2288 PWM PCB?
It measures 15.2 × 29.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RH2288 PWM use?
9 parts, built around the ATMEGA328P-MMH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RH2288 PWM KiCad files?
From the alphaarea/RH2288V2_FAN_Controller repository on GitHub, at the commit this page was made from: the board is PCB/RH2288_PWM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RH2288 PWM design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers81.3 × 67.3 mm
Parking system ESP
BenSchZA/decawave-trilateration-hardware
Hardware (Kicad schematics and PCB) for a local vehicle tracking solution using trilateration and Decawave technology.
52 parts - 6 layers38.1 × 38.1 mm
- 2 layers
CoinCellSensor
frankie-eight-days/mochiRadio
A 915MHz radio w/ temp sensor, pressure sensor, LED and ATMega328p
4 partsMIT - 2 layers29.8 × 28.1 mm
- 2 layers85 × 53 mm
- 4 layers25.5 × 32 mm
- 4 layers100.4 × 83 mm
Component tester
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
79 parts1