2 layers65 × 56 mm
2 layers28.5 × 30 mm
Pro micro
alperbasarn/OpenHapticHIDhaptic-interactive-human-interface-device
- Size
- 28.5 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 23
- Pads
- 95
- Tracks, vias
- 183, 49
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Jul 2024
- Updated
- 18 Jul 2024
Overview
Pro micro is an open-source printed circuit board by alperbasarn, from the alperbasarn/OpenHapticHID repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 28.5 × 30 mm with 23 parts on 23 nets, routed with 183 tracks and 49 vias.
Its parts include 9 capacitors, 6 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters boards of this library.
README
README.mdOpenHapticHID
haptic-interactive-human-interface-device
This repository contains the design and manufacturing files of an human interface device as well as the required software to run.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1u 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C6 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R6 |
| 2 | 0.1u 6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C9 |
| 2 | 10u 25V | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C1, C7 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 10u 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 2A | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 7uf 6.3v | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | Conn_01x02_Pin | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J1 |
| 1 | Conn_01x03 | Connector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_01x10 | Connector_Molex:Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal | J2 |
| 1 | red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | white | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | ~ | Package_DFN_QFN:IC_DRV8311HRRWR | U1 |
| 1 | ~ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
Questions
How big is the Pro micro PCB?
It measures 28.5 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pro micro use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pro micro KiCad files?
From the alperbasarn/OpenHapticHID repository on GitHub, at the commit this page was made from: the board is Motor Controller PCB/Design/pro_micro.kicad_pcb and its schematic Motor Controller PCB/Design/MotorDrive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pro micro design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258