
Panelized
algnor/qc3-bc
Battery controller using a bit bang implementation of QC3.0 protocol with accommodating hardware

Battery controller using a bit bang implementation of QC3.0 protocol with accommodating hardware
BatteryController is an open-source printed circuit board by algnor, from the algnor/qc3-bc repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59 × 36 mm with 20 parts on 17 nets, routed with 79 tracks and 0 vias.
It is built around the ATTINY45V-10PU and LM2596S-ADJ. Its parts include 7 connectors, 4 resistors, 3 capacitors, 3 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C3 |
| 2 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 680 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | 15nF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 22uH | custom:sdr1006 | L1 |
| 1 | ATtiny45V-10P | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J5 |
| 1 | D_Schottky | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | LP2950-3.3_TO92 | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | USB_A | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7 |

algnor/qc3-bc
Battery controller using a bit bang implementation of QC3.0 protocol with accommodating hardware

marceloh220/Tiny_PWM
Dual channel PWM driver controller. For LEDs, motors and other strangers things.




Aleksei327/ESP32-C5-OBD2-Scanner
DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.


Pendu1699/solar-mppt-charge-controller
ESP32-based solar MPPT charge controller, custom PCB, perturb & observe tracking algorithm, logged efficiency test data.

It measures 59 × 36 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the ATTINY45V-10PU and LM2596S-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the algnor/qc3-bc repository on GitHub, at the commit this page was made from: the board is KiCad/normal/batteryController.kicad_pcb and its schematic KiCad/normal/batteryController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).