Skip to the content
4 layers100 × 100 mmPyroDirector, the printed circuit board in 3D

PyroDirector

alex-sage/pyroPCB

KiCad files for the PyroDirector

Full screenGitHub.kicad_pcb
Size
100 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
92
Nets
122
Pads
393
Tracks, vias
625, 33
Pours
12
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
26 Jan 2023
Updated
21 Jan 2024

Overview

PyroDirector is an open-source printed circuit board by alex-sage, from the alex-sage/pyroPCB repository on GitHub. It is a 4-layer board of 100 × 100 mm with 92 parts on 122 nets, routed with 625 tracks and 33 vias.

It is built around the IRLB8721PBF, PR12-5V-360-1C and SJ1-2503A. Its parts include 30 resistors, 24 connectors, 13 transistors, 10 switches and 4 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

Parts

92
QtyValueFootprintReferences
121MResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R14, R16, R18, R20, R22, R24, R26, R28, R30
114k7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R5, R7, R8, R9, R10, R11, R12, R13, R19, R25
10MMBT2222A 1PPackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q10, Q12
4100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4
4Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J14, J16, J18
4MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
3100RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15, R21, R27
347kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR17, R23, R29
3IRLB8721PbFPackage_TO_SOT_THT:TO-220-3_VerticalQ9, Q11, Q13
3LED_extConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ20, J22, J24
3M7Diode_SMD:D_SMAD1, D2, D3
3PR12-5V-360-1CCUI Relays:PR12-5V-360-1CK1, K2, K3
3SJ1-2503Acui-2:CUI_SJ1-2503AJ15, J17, J19
3Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_HorizontalJ21, J23, J25
11Rcustom_footprints:R_Axial_Power_L48.0mm_W10mm_P55.88mmR6
1Arduino_PWRConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
1AudioJack3.5mmConnector_Audio:Jack_3.5mm_CUI_SJ1-3535NG_HorizontalJ2
1BTNSConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ10
1BattTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_HorizontalJ9
1CALIB_MODULEConnector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_VerticalJ12
1DC_ConvConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ11
1DISP_I2CConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ13
1Enable_PCB_ButtonsJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1Fusecustom_footprints:Fuseholder_Cylinder-5x20mm_Wuerth_WR-FSHF1
1Header_A1-A15Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_VerticalJ3
1Header_D14-19_D49_51_53Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_VerticalJ4
1Header_ISPConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1MEGA_PRO_ATMEGA2560MEGA_PRO_EMBED_CH340G___ATMEGA2560:MODULE_MEGA_PRO_EMBED_CH340G___ATMEGA2560U1
1PCB_Btn_+TS-1187A-B-A-B:SW_TS-1187A-B-A-BS3
1PCB_Btn_-TS-1187A-B-A-B:SW_TS-1187A-B-A-BS2
1PCB_Btn_CnclTS-1187A-B-A-B:SW_TS-1187A-B-A-BS1
1PCB_Btn_LEFTTS-1187A-B-A-B:SW_TS-1187A-B-A-BS4
1PCB_Btn_OKTS-1187A-B-A-B:SW_TS-1187A-B-A-BS6
1PCB_Btn_RIGHTTS-1187A-B-A-B:SW_TS-1187A-B-A-BS5
1PWR_SWITCHTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_HorizontalJ8
1SW_Enablecustom_footprints:Saleforce_T80-S_TS-13_Slide_SwitchSW1
1V_BattConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6

More from alex-sage/pyroPCB

2
  • 2 layers100 × 40 mmLed counter, the printed circuit board in 3D

    Led counter

    alex-sage/pyroPCB

    KiCad files for the PyroDirector

    37 parts
  • 2 layers70 × 50 mmInput panel, the printed circuit board in 3D

    Input panel

    alex-sage/pyroPCB

    KiCad files for the PyroDirector

    11 parts

Similar boards

  • 2 layers30 × 30 mmAudio, the printed circuit board in 3D

    Audio

    ArgonautGit/kicad-projects

    Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

    27 parts
  • 2 layers70 × 55 mmOpen lightning trigger, the printed circuit board in 3D

    Open lightning trigger

    conifarad/open-lightning-trigger

    A low-cost optical camera trigger for lightning and other phenomena

    50 partsCERN-OHL-P-2.0
  • 2 layers26.5 × 55.5 mmCgf.CameraControl.Hardware, the printed circuit board in 3D

    Cgf.CameraControl.Hardware

    sensslen/Cfg.CameraControl.Hardware

    Hardware needed to control a lanc camera with a PTZ head

    30 partsMIT
  • 2 layers94.8 × 73.1 mmKICAD lightning trigger, the printed circuit board in 3D

    KICAD lightning trigger

    zijianzhu0/lightning_trigger

    Lightning trigger for Nikon DSLR

    38 parts
  • 2 layers81.8 × 92 mmEndeavour, the printed circuit board in 3D

    Endeavour

    petrmikheev/endeavour

    Endeavour - open-source FPGA board and SoC ==========================================

    78 parts4
  • 2 layers50.8 × 28.6 mmBeaglebone obd, the printed circuit board in 3D

    Beaglebone obd

    KoffeinFlummi/rustbucket

    Access your car's diagnostics with a BeagleBone Blue and Rust.

    20 parts60GPL-3.0

Questions

How big is the PyroDirector PCB?

It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PyroDirector use?

92 parts, built around the IRLB8721PBF, PR12-5V-360-1C and SJ1-2503A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PyroDirector KiCad files?

From the alex-sage/pyroPCB repository on GitHub, at the commit this page was made from: the board is pyroDirector/pyroDirector.kicad_pcb and its schematic input-panel/input-panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PyroDirector design in my own project?

Its repository states no licence, so its author keeps all rights: ask alex-sage before reusing the design.