

FlightComputer
Flight assistant computer
- Size
- 148 × 102 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 408
- Nets
- 425
- Pads
- 1,394
- Tracks, vias
- 11,474, 1,422
- Pours
- 31
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Oct 2018
- Updated
- 19 Jan 2022
Overview
FlightComputer is an open-source printed circuit board by akkdong, from the akkdong/FlightComputer repository on GitHub. It is a 4-layer board of 148 × 102 mm with 408 parts on 425 nets, routed with 11,474 tracks and 1,422 vias.
It is built around the MCP73871EV, USBLC6-2SC6 and XC6220B331MR-G, with the MAX809TTRG-TP, MT48LC16M16A2P-6A:G and MBR130T1G among its other parts. Its parts include 211 resistors, 114 capacitors, 13 diodes, 11 inductors and 9 connectors.
Main components
6MCP73871EV
-ModulesMicrochip TechnologyUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)XC6220B331MR-G
SOT-25-40℃~+85℃ 1 1A 3.3V 50dB@(1kHz) 655mV@(1A) 6V 8uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMAX809TTRG-TP
SOT-23SOT-23 Supervisor and Reset ICs ROHSTECH PUBLICUncategorisedMT48LC16M16A2P-6A:G
TSOP-54-400mil0℃~+70℃ 100mA 167MHz 2.5mA 256Mbit 3V~3.6V High-speed clock synchronization、Auto precharge、Automatic column address generation、Auto refresh TSOP-54-400mil SDRAM ROHSMicron TechSDRAMMBR130T1G
SOD-123Schottky DiodesTokmas
README
README.mdFlight Computer(Assistant)
Hardware
- Raspberry PI Zero
- E-Ink
- STM32H7 Dual core
- Peripherals
- 10DOF IMU
- GPS
- SD-Card
- Battery change
- Codec
- ...
- ...
Parts
408| Qty | Value | Footprint | References |
|---|---|---|---|
| 124 | 33R | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R10, R13, R100, R101, R102, R107, R108, R109, R110, R111, R112, R122, R126, R135, R141 +108 |
| 43 | 0.1uF | FlightComputer_Library:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C100, C102, C103, C104, C105, C106, C107, C108, C109, C111, C112, C113, C114, C115, C116 +27 |
| 27 | 0R | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R124, R125, R127, R128, R129, R139, R157, R158, R159, R160, R165, R166, R167, R168, R170 +11 |
| 13 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C23, C24, C31, C32, C33, C34, C36, C37, C38, C39, C62, C67, C68 |
| 12 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C17, C18, C20, C21, C22, C35, C61, C65, C96, C101, C120, C121 |
| 12 | N/C | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12, R117, R148, R149, R171, R185, R193, R195, R196, R197, R200 |
| 10 | 10K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14, R36, R37, R46, R184, R189, R190, R191, R192, R207 |
| 10 | 1K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R28, R29, R30, R31, R118, R119, R134, R138, R187, R217 |
| 9 | 100K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R113, R116, R120, R123, R136, R162, R169, R186, R188 |
| 8 | 1uF | FlightComputer_Library:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C40, C53, C54, C59, C69, C90, C97, C99 |
| 8 | 4.7uF | FlightComputer_Library:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5, C14, C15, C91, C92, C93, C110 |
| 7 | 220pF | FlightComputer_Library:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7, C10, C11, C12, C13, C95 |
| 7 | 47K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R95, R96, R103, R104, R105, R106, R130 |
| 7 | Ferrite | FlightComputer_Library:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1, L2, L3, L4, L5, L6, L7 |
| 6 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J_Pad1.25x1.05mm_HandSolder | C8, C9, C52, C56, C58, C71 |
| 4 | 1M | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18, R20, R115, R140 |
| 3 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C66, C73, C74 |
| 3 | LED_R | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D10, D11, D12 |
| 3 | N/C | FlightComputer_Library:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C55, C60, C72 |
| 3 | RB531SM | Diode_SMD:D_SOD-523 | D3, D4, D5 |
| 2 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C27, C28 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C25, C26 |
| 2 | 18pF | FlightComputer_Library:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C83, C84 |
| 2 | 2.2uF | FlightComputer_Library:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C29, C30 |
| 2 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1, J2 |
| 2 | MBR130T1G | Diode_SMD:D_SOD-523 | D1, D2 |
| 2 | SW_Push | FlightComputer_Library:SW-TACT-436351045816 | SW10, SW11 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U15, U16 |
| 2 | USB_B_Micro | FlightComputer_Library:USB_Micro-B_TE-1981568-1 | J12, J13 |
| 2 | XC6220B331MR-G | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U6, U8 |
| 1 | +15V | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | +22V | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | +BATT | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | -15V | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | -20V | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C64 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder | C75 |
| 1 | 15K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R121 |
| 1 | 1uH | FlightComputer_Library:SRP1038C-1R0M | L11 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C63 |
| 1 | 2.2uH | FlightComputer_Library:L_1515(4040 metric) | L8 |
| 1 | 2.2uH (LQM2MPN2R2NG0) | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L12 |
| 1 | 24MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | 25MHz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | 270K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R114 |
| 1 | 4.7uH | FlightComputer_Library:L_1515(4040 metric) | L9 |
| 1 | 43K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R22 |
| 1 | 47.5K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R19 |
| 1 | 47k | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R208 |
| 1 | 52.3K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21 |
| 1 | 560K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R137 |
| 1 | 732K | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R163 |
| 1 | BAT54-SOT23 | Diode_SMD:D_SOD-523 | D6 |
| 1 | BCM17 | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | BEAD(BMJ1608HM180NTR) | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1 |
| 1 | Conn_01x01 | Connector_Pin:Pin_D1.2mm_L10.2mm_W2.9mm_FlatFork | J4 |
| 1 | Conn_01x02 | Connector_Molex:Molex_SPOX_5268-02A_1x02_P2.50mm_Horizontal | J8 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J11 |
| 1 | ED060SC7_EPD | FlightComputer_Library:AXT334124 | J5 |
| 1 | EINK_SPI_CS | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | EINK_SPI_SCL | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | EINK_SPI_SDI | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | EINK_SPI_SDO | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | GPCLK0 | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | GY-86 | FlightComputer_Library:GY-86 | M3 |
| 1 | GY-91 | FlightComputer_Library:GY-91 | M2 |
| 1 | LED_G | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9 |
| 1 | LED_G | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D13 |
| 1 | LED_G | FlightComputer_Library:SML-LXR85GC-TR | D8 |
| 1 | LED_R | FlightComputer_Library:SML-LXR85GC-TR | D7 |
| 1 | LOGO | FlightComputer_Library:LOGO-FC | G*** |
| 1 | MAX809TTRG | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U7 |
| 1 | MT25QL512ABB8ESF | FlightComputer_Library:SOP2-16_7.5x10.3mm_P1.27mm | U3 |
| 1 | MT48LC16M16A2P | Package_SO:TSOP-II-54_22.2x10.16mm_P0.8mm | U4 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J7 |
| 1 | NCP18XH103F03RB(10K) | FlightComputer_Library:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | TH1 |
| 1 | OUT3 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | PC2 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | PG12 | TestPoint:TestPoint_Pad_D1.0mm | TP25 |
The 389 most common of 408 parts.
Questions
How big is the FlightComputer PCB?
It measures 148 × 102 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FlightComputer use?
408 parts, built around the MCP73871EV, USBLC6-2SC6, XC6220B331MR-G and MAX809TTRG-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FlightComputer KiCad files?
From the akkdong/FlightComputer repository on GitHub, at the commit this page was made from: the board is hw/rev1/FlightComputer/FlightComputer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FlightComputer design in my own project?
Its repository states no licence, so its author keeps all rights: ask akkdong before reusing the design.
More from akkdong/FlightComputer
6- 4 layers148 × 102 mm

- 2 layers26 × 30 mm

- 2 layers148 × 42 mm

- 2 layers44 × 50 mm

- 2 layers128 × 16.9 mm

- 2 layers23.1 × 20.7 mm

Similar boards
- 4 layers100 × 64 mm

S6la8
OutBlade/s6la8
Open-source 8-channel logic analyzer: FX2LP + Spartan-6, with a sigrok driver. Design in progress, not yet built or tested.
155 parts1 - 4 layers137.4 × 82.6 mm

Lcd standard-5R
rohamid/lcd-east-rising-backpack
PCB controller backpack for east rising LCD modules
179 parts - 4 layers128 × 85 mm

- 4 layers26.7 × 55.2 mm

Sombrero MSX Goa'uld
jabadiagm/MSXgoauldSD_tn20k
MSX Goa'uld board with Tang Nano 20k and SD support
17 parts41GPL-3.0 - 2 layers60 × 110 mm

AddaTone components
dchwebb/Addatone
Eurorack Additive Oscillator based on Lattice FPGA and ARM MCU
95 parts13 - 4 layers65 × 56.1 mm

- 2 layers100 × 100 mm

Gatekeeper PCB
Ingimarsson/gatekeeper
Access control and monitoring system for electric door locks and automatic traffic barriers.
61 parts1MIT - 2 layers505.4 × 130.4 mm

Split keyboard
Arwinplayz/Split-Keyboard-V2
I decided to make a V2 which would allow me to redo/refine some features. That is I want to add a LiPo battery and change the requirement of having both sides plugged in separately to the PC.
262 parts