Skip to the content
2 layers20 × 10 mmGroveLevelShifter, the printed circuit board in 3D

GroveLevelShifter

akita11/GroveLevelShifter
Size
20 × 10 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
5
Pads
16
Tracks, vias
44, 4
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
19 Dec 2023
Updated
24 Dec 2023

Overview

GroveLevelShifter is an open-source printed circuit board by akita11, from the akita11/GroveLevelShifter repository on GitHub, published under the MIT licence. It is a 2-layer board of 20 × 10 mm with 5 parts on 5 nets, routed with 44 tracks and 4 vias.

It is built around the LM1117-3.3. Its parts include 2 capacitors, 2 connectors and 1 IC.

Main components

1

README

README.md

GroveLevelShifter

2本のGroveケーブルを接続して延長し、その中の電源電圧(+5V)を3.3Vに変換します。M5StackシリーズのGrove互換コネクタ(HY4pコネクタ)は電源電圧が5Vですが、信号電圧は3.3Vのため、信号電圧レベルをあわせるのに利用できます。その他のGNDと2本の信号線はそのまま接続されています。

使い方

2つのGroveコネクタのうち、"5V"と書いてある側("GroveLevelShifetr"の文字がある側)に、電源供給側(M5Stackなど)からのGroveケーブルを接続します。反対側の"3.3V"と書いてある側(IC等の部品が乗っている側)のGroveコネクタの電源には3.3Vが出力されますので、Groveケーブルで3.3Vを供給したいセンサ等に接続します。

Author

Junichi Akita (akita@ifdl.jp, @akita11)

Parts

5
QtyValueFootprintReferences
2CON_GROVEakita:CON_GROVE_HCN1, CN2
10.1uCapacitor_SMD:C_0603_1608MetricC1
110uCapacitor_SMD:C_0603_1608MetricC2
1LM1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers95.2 × 57.2 mmDomesdayDuplicator, the printed circuit board in 3D

    DomesdayDuplicator

    Domesday86/DomesdayDuplicator

    High-speed LaserDisc RF sampler

    66 parts325GPL-3.0
  • 2 layers189.5 × 204.9 mmSmartSpin2k Panelized, the printed circuit board in 3D

    SmartSpin2k Panelized

    doudar/SmartSpin2k

    Transform your spin bike into a Smart Trainer!

    749 parts292GPL-2.0
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 4 layers113.5 × 105.5 mmMultistepper, the printed circuit board in 3D

    Multistepper

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    243 parts208
  • 2 layers275 × 103 mmKeebee, the printed circuit board in 3D

    Keebee

    blakesmith/embedded

    Blake's embedded projects

    159 parts167
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0

Questions

How big is the GroveLevelShifter PCB?

It measures 20 × 10 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GroveLevelShifter use?

5 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GroveLevelShifter KiCad files?

From the akita11/GroveLevelShifter repository on GitHub, at the commit this page was made from: the board is GroveLevelShifter.kicad_pcb and its schematic GroveLevelShifter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the GroveLevelShifter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).