
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

GroveLevelShifter is an open-source printed circuit board by akita11, from the akita11/GroveLevelShifter repository on GitHub, published under the MIT licence. It is a 2-layer board of 20 × 10 mm with 5 parts on 5 nets, routed with 44 tracks and 4 vias.
It is built around the LM1117-3.3. Its parts include 2 capacitors, 2 connectors and 1 IC.
2本のGroveケーブルを接続して延長し、その中の電源電圧(+5V)を3.3Vに変換します。M5StackシリーズのGrove互換コネクタ(HY4pコネクタ)は電源電圧が5Vですが、信号電圧は3.3Vのため、信号電圧レベルをあわせるのに利用できます。その他のGNDと2本の信号線はそのまま接続されています。
2つのGroveコネクタのうち、"5V"と書いてある側("GroveLevelShifetr"の文字がある側)に、電源供給側(M5Stackなど)からのGroveケーブルを接続します。反対側の"3.3V"と書いてある側(IC等の部品が乗っている側)のGroveコネクタの電源には3.3Vが出力されますので、Groveケーブルで3.3Vを供給したいセンサ等に接続します。
Junichi Akita (akita@ifdl.jp, @akita11)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CON_GROVE | akita:CON_GROVE_H | CN1, CN2 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix


doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

plinkysynth/plinky_public
a public release of the plinky sw and hw

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32


It measures 20 × 10 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the akita11/GroveLevelShifter repository on GitHub, at the commit this page was made from: the board is GroveLevelShifter.kicad_pcb and its schematic GroveLevelShifter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).