

DiffPressureUNIT
- Size
- 29 × 43.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 9
- Pads
- 37
- Tracks, vias
- 35, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Feb 2024
- Updated
- 7 Mar 2024
Overview
DiffPressureUNIT is an open-source printed circuit board by akita11, from the akita11/DifferentialPressureUNIT repository on GitHub. It is a 2-layer board of 29 × 43.8 mm with 18 parts on 9 nets, routed with 35 tracks and 1 via.
Its parts include 5 connectors and 2 resistors.
README
README.mdDiffPressute Unit
空気の動きも検出できるSensirion社の高感度差圧センサSDP810-125Paで2つの口の差圧を計測し、Groveポートから計測値を送出します。計測値は搭載するATOM S3上のディスプレイで確認できます。計測されたデータは、Core2等で利用できます。(使用例)
設定・操作
ATOM S3のボタン(ディスプレイ面)で以下のように設定を変更できます
- シングルクリック: 画面に表示されるグラフの感度(測定値の10倍(初期値:白)→100倍(緑)→1000倍(水色)→戻る)
- ダブルクリック: データ送出周波数(20ms(50Hz)→100ms(10Hz)→5ms(200Hz)→戻る)※グラフの動く速さが変わります
UIFlowでの使い方
UIFlow用のカスタムブロックを用意してあります(現時点ではCore2専用ですがピン割当を変更することで他のCore Basic等でも利用可能)。
- Core2のPortAに、本UnitのGroveポート(ATOM S3上)からのGroveケーブルを接続します
- UIFlowの"Custom"の"Open *.m5b"から、UIFlow/DiffPressureUNIT.m5b を開く→Custom内に"DiffPressureUnit"が追加される
- UIFlow/DiffPressureUNIT_sample.m5f"を参考に利用できます
- getDiffPressureブロックで得られる値の単位は"Pa"です。
UART通信プロトコル
- UARTプロトコル: 115200bps, N81
- データ形式: 計測値(-32768〜+32767:符号付き16bit)の文字列+LF('\n')
この「計測値」は、SDP810-125Paから出力される計測値です。実際の圧力への換算式はデータシートにあり、「計測値 ÷ 240 [Pa]」となります(例:計測値で"240"が1Pa)。なおSDP810-125Paのデータシートによれば、ゼロ点精度は0.08Pa、ゼロ点再現性は0.04Paです。(前述のUIFlow用カスタムブロックでは、この換算式を用いて単位[Pa]で計測値が得られます)
Author
Junichi Akita (akita@ifdl.jp, @akita11)
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J5 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J4 |
| 1 | Conn_01x04 | Connector_PinSocket_2.00mm:PinSocket_1x04_P2.00mm_Vertical | J3 |
The 7 most common of 18 parts.
Similar boards
- 2 layers27.9 × 16.5 mm

- 2 layers42.7 × 13.7 mm

Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm

- 2 layers44 × 51.3 mm

4272MAVcoder R4
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
18 parts915 - 2 layers28.3 × 14.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 2 layers20.3 × 15.2 mm

L0 stepper driver
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
18 parts546MIT - 2 layers

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0
Questions
How big is the DiffPressureUNIT PCB?
It measures 29 × 43.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DiffPressureUNIT use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DiffPressureUNIT KiCad files?
From the akita11/DifferentialPressureUNIT repository on GitHub, at the commit this page was made from: the board is DiffPressureUNIT.kicad_pcb and its schematic DiffPressureUNIT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DiffPressureUNIT design in my own project?
Its repository states no licence, so its author keeps all rights: ask akita11 before reusing the design.