Skip to the content
2 layers97 × 91 mmClockPCB, the printed circuit board in 3D

The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

Size
97 × 91 mm
Copper layers
2
Thickness
1.6 mm
Parts
77
Nets
123
Pads
304
Tracks, vias
1,028, 110
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Apr 2025
Updated
26 Jul 2025

Overview

ClockPCB is an open-source printed circuit board by akbar-q, from the akbar-q/Circuits-PCB-HardwareDesign repository on GitHub. It is a 2-layer board of 97 × 91 mm with 77 parts on 123 nets, routed with 1,028 tracks and 110 vias.

It is built around the NE555P and CD4026BE. Its parts include 4 resistors, 2 ICs, 1 capacitor and 1 connector.

Main components

2

README

RF High Voltage Arc Detector/README.md

High Voltage Arc Detector

Client Project - Fiverr Delivery
Version: 1.0
Date: April 2025
Designer: Akbar Q Hardware Design


Overview

The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs. Using a differential antenna and fast amplification, the system captures high-frequency electromagnetic noise from arcing events and outputs a user-friendly signal. This signal can drive a buzzer and LED for alerts or be interfaced with other control systems via a latched output.


Features

  • Differential Antenna Input with ESD protection
  • 10 kHz – 180 MHz Bandpass Filter for noise immunity
  • High-Speed Amplification using LMH6702MA
  • Passive Peak Detector to extract signal envelope
  • Adjustable Threshold Comparator with internal hysteresis
  • Optional 1-Second Output Pulse Generator
  • Buzzer and LED Indicator
  • Wide Operating Voltage Range: 9–15V external input

Hardware Overview

1. Differential RF Front-End

  • Antenna: PCB-based, differential, optimized for broadband detection
  • ESD Protection: ESD diodes on both inputs (D4, D5)

2. Bandpass Filter

  • Twin LC π-filter tuned between ~10 kHz and 180 MHz.

3. High-Speed Amplifier

  • LMH6702MA: Provides wideband gain with 50Ω I/O matching.
  • RF output (J3) optionally accessible for oscilloscope viewing or chaining.

4. Peak Detector

  • Passive envelope detector (BAT54J, C8) extracts the peak value of arc noise.

5. Comparator Section

  • LMV7219: Single comparator with internal hysteresis.
  • Comparator threshold adjustable via RV1 Potentiometer/Trimmer.

6. Optional Pulse Extension

  • Monostable (U1A - 74LVC1G123) triggers a 1-second pulse on arc detection.
  • Drives a piezo buzzer and indicator LED (D5, BZ1).
  • Useful for ensuring transient arcs are not missed.

7. Output Control

  • Output Header (J4): Provides comparator signal, latched pulse, and power rails.
  • Ready for connection to digital systems, relays, or logging modules.

Files Included

FileDescription
\Renders\NonContactHVDetector.png[Top-side PCB render]
\Renders\PCB Sheet.pdf[Full schematic PDF]
\Renders\Schematic Sheet.pdf[PCB layout drawing PDF]

Setup Instructions

Power Supply

  • Connect a 9–15V DC source to J1.
  • The onboard regulators (U5, U6) generate ±5V for analog and digital sections.
  • Place Holder Switch for 3v3 Operation but Client Does not Require it, No 3v3 Supply Present

Threshold Adjustment

  • Use RV1 to set the comparator threshold.
  • Start low and increase gradually while observing arc detection response.

Output Behavior

  • When an arc is detected:
    • CompareSig goes high.
    • If the pulse circuit is enabled, a 1-second pulse drives the buzzer and LED.
    • Use LongPulse to trigger downstream systems (e.g., microcontrollers, relays).

Project Details

ItemValue
PCB Size~75mm x 45mm
StackupJLC04161H-7628
FabricationJLCPCB
Schematic ToolKiCad 9.0

Customization Options

  • Bandwidth: Change Filter R and C Values as Per Reference Table.
  • Pulse Width: Adjust R6 or C1 in U1A section for different pulse durations.
  • RF Output (J3): Optional, can be disconnected if not used.
  • LED/Buzzer: Can be disabled by removing R7 or D5 for silent operation.

License & Delivery

This hardware design was custom-made for a Fiverr client, it has been made public only with authorization of the Client. Commercial reuse or redistribution outside the original Fiverr transaction is prohibited unless licensed.


Contact

For revisions, follow-up customizations, or future electronics designs:
Contact: contact@akbarq.com
Portfolio: akbarq.com


Parts

77
QtyValueFootprintReferences
42270RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR-xx1, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +26
6CD4026BEPackage_DIP:DIP-16_W10.16mm_LongPadsU-Hx1, U-Mx1, U-Sx1, U-xH1, U-xM1, U-xS1
6D168KDisplay_7Segment:D1X8KU-DHx1, U-DMx1, U-DSx1, U-DxH1, U-DxM1, U-DxS1
5LOGOLOGOG***, G***, G***, G***, G***
410kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2, R3, R4
3SW_PushGlobal Custom Lib:Tact Momentary SwitchHour, Minute, Zero
2SW_SPDTConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalDisplay, TimeSet
10.01uFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmCd1
110kRPotentiometer_THT:Potentiometer_Bourns_3386F_VerticalRaTune1
110uFCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC1
11kRResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalRa1
11uFCapacitor_THT:CP_Radial_D4.0mm_P2.00mmCtime1
14081Package_DIP:DIP-14_W7.62mm_Socket_LongPadsU1
1470RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalRb1
1Barrel_JackConnector_BarrelJack:BarrelJack_HorizontalJ1
1NE555PPackage_DIP:DIP-8_W7.62mmU2

More from akbar-q/Circuits-PCB-HardwareDesign

8
  • 2 layers68.7 × 164.8 mmPLC Hardware, the printed circuit board in 3D

    PLC Hardware

    akbar-q/Circuits-PCB-HardwareDesign

    The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

    160 parts
  • 4 layers28.6 × 91.1 mmPowerRF AMP, the printed circuit board in 3D

    PowerRF AMP

    akbar-q/Circuits-PCB-HardwareDesign

    The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

    140 parts
  • 2 layers100 × 72.8 mm020 NiMH Battery Charger, the printed circuit board in 3D

    020 NiMH Battery Charger

    akbar-q/Circuits-PCB-HardwareDesign

    The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

    103 parts
  • 4 layers99 × 99 mmMPPT Controller, the printed circuit board in 3D

    MPPT Controller

    akbar-q/Circuits-PCB-HardwareDesign

    The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

    101 parts
  • 4 layers28.6 × 49.5 mmRF Amp BEngMajor, the printed circuit board in 3D

    RF Amp BEngMajor

    akbar-q/Circuits-PCB-HardwareDesign

    The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

    62 parts
  • 2 layers59.2 × 146.2 mmMacroKeypad Project, the printed circuit board in 3D

    MacroKeypad Project

    akbar-q/Circuits-PCB-HardwareDesign

    The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

    60 parts
  • 4 layers118.2 × 53.2 mmNonContactHVDetector, the printed circuit board in 3D

    NonContactHVDetector

    akbar-q/Circuits-PCB-HardwareDesign

    The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

    59 parts
  • 2 layers162.6 × 86.4 mmBms, the printed circuit board in 3D

    Bms

    akbar-q/Circuits-PCB-HardwareDesign

    The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.

    53 parts

Similar boards

  • 2 layers100 × 100 mmTach v1.0, the printed circuit board in 3D

    Tach v1.0

    maheen-ahmed1/OptoTACH

    Precision non-contact optical tachometer (0–9999 RPM/RPS) built entirely with discrete CMOS logic & 555 timers; no microcontroller, no firmware. Includes KiCad EDA, 3D model, Python simulation, and bench validation.

    99 parts
  • 2 layers77.2 × 54.6 mmPCD with routing, the printed circuit board in 3D

    PCD with routing

    mariam-essam2/Timer-555-PCB-project

    A hardware-based 60-minute Pomodoro timer with dual 7-segment displays, manual/auto-reset, and buzzer alert. Fully simulated, tested, and ready for PCB fabrication with complete schematics, footprints, and Gerber files

    23 parts
  • 2 layers48 × 40 mmSegmentCounter, the printed circuit board in 3D

    SegmentCounter

    martinbros/Quantifying-the-Current

    Art piece demonstrating the power grid

    38 parts2GPL-3.0
  • 2 layers92 × 68.8 mmPanelized, the printed circuit board in 3D

    Panelized

    mpkendall/outpost-thingies

    45 parts2
  • 2 layers151 × 68.5 mmPCBProject, the printed circuit board in 3D

    PCBProject

    aditya02095/PCB-Design

    Here are the gerber files for the digital frequency meter created using KiCAD

    49 parts
  • 2 layers126.4 × 157 mmEiit, the printed circuit board in 3D

    Eiit

    guptapurnima/Digital-Electronics-Design-Digital-Frequency-Meter-

    Designed Schmitt Trigger and CMOS logic circuits using CD4007 and CD4026 ICs. Created complete schematics, PCB footprints, and 3D models in KiCAD. Validated signal integrity across the designed circuits.

    49 parts
  • 2 layersCounter, the printed circuit board in 3D

    Counter

    Gurusiddharth5254/digital-_stopwatch-_shiftregister

    This project implements a PCB-based digital stopwatch using a crystal oscillator for accurate timing. Counters and shift registers process clock pulses, while 7-segment decoder ICs drive a two-digit display.

    17 parts

Questions

How big is the ClockPCB PCB?

It measures 97 × 91 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ClockPCB use?

77 parts, built around the NE555P and CD4026BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ClockPCB KiCad files?

From the akbar-q/Circuits-PCB-HardwareDesign repository on GitHub, at the commit this page was made from: the board is Digital Logic Clock/ClockPCB.kicad_pcb and its schematic Battery Management Client Collab/bms.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ClockPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask akbar-q before reusing the design.