

SERVO CONTROL CARD LCD
- Size
- 165 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 59
- Pads
- 250
- Tracks, vias
- 499, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Dec 2024
- Updated
- 8 Dec 2024
Overview
SERVO CONTROL CARD LCD is an open-source printed circuit board by ak-electronics, from the ak-electronics/servo-control-card-lcd-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 165 × 95 mm with 65 parts on 59 nets, routed with 499 tracks and 4 vias.
It is built around the MOC3041M and BC547. Its parts include 23 resistors, 9 capacitors, 8 diodes, 5 ICs and 5 switches. It belongs with the robots and motor control and lEDs and displays boards and the 8051 (CH55x, STC, AT89) boards of this library.
Main components
2README
README.mdservo-control-card-lcd
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10K | My Custom Footprint:R_1206_3216Metric | R5, R9, R10, R13, R15, R17, R18, R21, R22, R23, R24 |
| 8 | C | My Custom Footprint:C_1206_3216Metric | C1, C2, C3, C6, C7, C8, C9, C10 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4, H5, H6 |
| 4 | D | My Custom Footprint:D_1206 | D1, D2, D8, D9 |
| 4 | SW_DIP_x01 | Button_Switch_THT:SW_PUSH-12mm | SW1, SW2, SW3, SW4 |
| 3 | 220R | My Custom Footprint:R_1206_3216Metric | R6, R8, R20 |
| 3 | LED | LED_THT:LED_D3.0mm | D3, D4, D5 |
| 2 | 1.5K | My Custom Footprint:R_1206_3216Metric | R2, R4 |
| 2 | 330K | My Custom Footprint:R_1206_3216Metric | R1, R3 |
| 2 | 560R | My Custom Footprint:R_1206_3216Metric | R11, R12 |
| 2 | BC547 | My Custom Footprint:SOT-23_Transistor | Q3, Q4 |
| 2 | BT136-500 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | Conn_01x05 | My Custom Footprint:Block_connector_5x1_H1.5_P8 | J2, J4 |
| 2 | MOC3041M | Package_DIP:DIP-6_W7.62mm_Socket_LongPads | U4, U5 |
| 2 | R | My Custom Footprint:R_1206_3216Metric | R14, R19 |
| 1 | 1K | My Custom Footprint:R_1206_3216Metric | R7 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CP | My Custom Footprint:CP_Radial_D8.0mm_P5.00mm | C4 |
| 1 | Conn_01x02 | My Custom Footprint:Block_connector_2x1_H1.5_P8 | J1 |
| 1 | Conn_01x05 | My Custom Footprint:5_Pin_PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | D_Bridge_+-AA | My Custom Footprint:MB10_bridge | D7 |
| 1 | FINDER-34.51 | Relay_THT:Relay_SPDT_Finder_36.11 | K1 |
| 1 | LM7805_TO220 | My Custom Footprint:TO-126_Horizontal_7805 | U2 |
| 1 | N76E003 | My Custom Footprint:SSOP-20_5.3x7.2mm_P0.65mm | U1 |
| 1 | RC1602A | Display:WC1602A | U3 |
Similar boards
- 2 layers148 × 61 mm

- 2 layers135 × 101.5 mm

- 2 layers121 × 68 mm

Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers50.8 × 50.8 mm

- 2 layers90 × 100 mm

Olivia control
AlterMundi-MonitoreoyControl/Proyecto-Incubadora
Is an innovative project aimed at enhancing the efficiency and productivity of poultry incubators in family farming.
51 parts4LGPL-2.1 - 2 layers100 × 74 mm

Qym solder
basson/qym-solder
QymSolder - Soldering station three in one - hakko t12, hot air gun, d909/898D or analog.
135 parts4GPL-3.0 - 2 layers68.6 × 73.7 mm

Lm324 soldering station
JanoVel/lm324_soldering_station
The KiCad project of the lm324 soldering station described in this post: http://electronics.vlzqz.com/analog-closed-loop-controlled-soldering-station.html
40 parts4MIT - 2 layers51.9 × 52 mm

Questions
How big is the SERVO CONTROL CARD LCD PCB?
It measures 165 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SERVO CONTROL CARD LCD use?
65 parts, built around the MOC3041M and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SERVO CONTROL CARD LCD KiCad files?
From the ak-electronics/servo-control-card-lcd-pcb repository on GitHub, at the commit this page was made from: the board is SERVO CONTROL CARD LCD.kicad_pcb and its schematic SERVO CONTROL CARD LCD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SERVO CONTROL CARD LCD design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).