

Emphasis
Synth DIY stuff
- Size
- 121.7 × 129 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 84
- Pads
- 196
- Tracks, vias
- 230, 35
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Aug 2021
- Updated
- 25 Jun 2023
Overview
Emphasis is an open-source printed circuit board by ajjackson, from the ajjackson/eurorack repository on GitHub. It is a 2-layer board of 121.7 × 129 mm with 43 parts on 84 nets, routed with 230 tracks and 35 vias.
It is built around the TL072. Its parts include 14 connectors, 8 resistors, 6 capacitors, 4 diodes and 2 ICs. It belongs with the audio and music boards of this library.
Main components
1README
README.mdajjackson's DIY synth stuff
Somewhere to capture and develop some ideas for novel synthesiser modules. Currently that means Eurorack, so +/- 12V power, TS mini jacks, 10V peak-to-peak audio signals.
Not clear at this stage if the end goal is perfboard or PCBs, will see how ambitious the designs get...
License is CC-by-sa where appropriate
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 4 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4 |
| 3 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2, RV3 |
| 2 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4 |
| 2 | 10pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C5, C6 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 2 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6 |
| 2 | Conn_01x03_Female | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x03_Male | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J11, J12 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | AudioJack2_SwitchT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J7 |
| 1 | Conn_01x20_Female | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J8 |
| 1 | Conn_01x20_Male | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Horizontal | J13 |
| 1 | Conn_02x05 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J14 |
| 1 | DE_EMPH_IN | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3 |
| 1 | DE_EMPH_OUT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J6 |
| 1 | DIST_IN | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2 |
| 1 | DIST_OUT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | EMPH_IN | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | EMPH_OUT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4 |
| 1 | ES_DAISY_PATCH_SM_REV1-Electrosmith-Boards | Library:ES_DAISY_PATCH_SM_REV1 | U1 |
| 1 | SW_SPDT | Library:Dailywell sub-miniature toggle switch | SW2 |
| 1 | SW_SPDT_MSM | Library:Dailywell sub-miniature toggle switch | SW1 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket | U2 |
More from ajjackson/eurorack
3- 2 layers124 × 107.3 mm

- 2 layers29.8 × 106.7 mm

- 2 layers

Similar boards
- 2 layers148 × 84.5 mm

Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410 - 2 layers39.6 × 99.1 mm

ESP32-Eurorack Audio
ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module
128 parts260 - 4 layers121.9 × 109.2 mm

Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 2 layers58 × 110 mm

- 2 layers37 × 113.9 mm

- 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers27.9 × 101.6 mm

MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 2 layers85.1 × 62.2 mm

Mic extension board
StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
75 parts146
Questions
How big is the Emphasis PCB?
It measures 121.7 × 129 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Emphasis use?
43 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Emphasis KiCad files?
From the ajjackson/eurorack repository on GitHub, at the commit this page was made from: the board is kicad6/emphasis/emphasis.kicad_pcb and its schematic kicad6/compara4/compara4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Emphasis design in my own project?
Its repository states no licence, so its author keeps all rights: ask ajjackson before reusing the design.