

Compara4
Synth DIY stuff
- Size
- 124 × 107.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 95
- Pads
- 249
- Tracks, vias
- 369, 50
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Aug 2021
- Updated
- 25 Jun 2023
Overview
Compara4 is an open-source printed circuit board by ajjackson, from the ajjackson/eurorack repository on GitHub. It is a 2-layer board of 124 × 107.3 mm with 64 parts on 95 nets, routed with 369 tracks and 50 vias.
Its parts include 32 resistors, 12 connectors, 10 diodes, 5 capacitors and 3 ICs. It belongs with the audio and music boards of this library.
README
README.mdajjackson's DIY synth stuff
Somewhere to capture and develop some ideas for novel synthesiser modules. Currently that means Eurorack, so +/- 12V power, TS mini jacks, 10V peak-to-peak audio signals.
Not clear at this stage if the end goal is perfboard or PCBs, will see how ambitious the designs get...
License is CC-by-sa where appropriate
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25, R26, R27, R28, R29, R30, R31, R32, R33, R34 |
| 9 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5, R6, R8, R9, R10, R11, R12 |
| 8 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 7 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R7, R17, R18, R19, R20, R21 |
| 4 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14, R15, R16 |
| 3 | 100n | Capacitor_THT:C_Disc_D10.5mm_W5.0mm_P5.00mm | C1, C2, C3 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R22 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C5 |
| 2 | LED_Dual_Bidirectional | LED_THT:LED_D5.0mm | D9, D10 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | 4041 | Package_DIP:DIP-14_W7.62mm_Socket | U3 |
| 1 | 4070 | Package_DIP:DIP-14_W7.62mm_Socket | U2 |
| 1 | CV_Jack | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J11 |
| 1 | Conn_01x34_Female | Connector_PinHeader_2.54mm:PinHeader_1x34_P2.54mm_Vertical | J1 |
| 1 | Conn_01x34_Male | Connector_PinHeader_2.54mm:PinHeader_1x34_P2.54mm_Horizontal | J2 |
| 1 | Conn_02x05_Top_Bottom | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J12 |
| 1 | In_1 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3 |
| 1 | In_2 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4 |
| 1 | In_3 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | In_4 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J10 |
| 1 | Out_NOR | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J9 |
| 1 | Out_OR | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J8 |
| 1 | Out_XNOR | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J7 |
| 1 | Out_XOR | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J6 |
| 1 | SW_SPDT | Library:Dailywell sub-miniature toggle switch | SW1 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |
More from ajjackson/eurorack
3Similar boards
- 2 layers76.5 × 120 mm

Numpad project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
64 parts915 - 2 layers160 × 99.1 mm

Flat hierarchy
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
64 parts744MIT - 2 layers49 × 53.2 mm

DB25 External
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
64 parts459GPL-3.0 - 2 layers90 × 71 mm

- 2 layers28 × 30 mm

- 2 layers192.9 × 59.5 mm

Alpha pro micro
PyrooL/Alpha
A 28-key semi-ortholinear mechanical keyboard designed by PyroL
64 parts298MIT - 2 layers128 × 88 mm

Fireball revD
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
64 parts223 - 2 layers78 × 81 mm

Questions
How big is the Compara4 PCB?
It measures 124 × 107.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Compara4 use?
64 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Compara4 KiCad files?
From the ajjackson/eurorack repository on GitHub, at the commit this page was made from: the board is kicad6/compara4/compara4.kicad_pcb and its schematic kicad6/compara4/compara4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Compara4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ajjackson before reusing the design.

