

TeensySynth41
A digital polysynth based on the teensy 4.1
- Size
- 355.6 × 97.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 115
- Pads
- 398
- Tracks, vias
- 798, 132
- Pours
- 436
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Oct 2024
- Updated
- 31 Oct 2024
Overview
TeensySynth41 is an open-source printed circuit board by ajharvie, from the ajharvie/TeensyPolySynth repository on GitHub. It is a 2-layer board of 355.6 × 97.8 mm with 86 parts on 115 nets, routed with 798 tracks and 132 vias.
It is built around the TSR 1-2450, TEENSY 4.1 and 74HC4051. Its parts include 12 resistors, 10 switches, 8 ICs, 7 diodes and 5 transistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3TSR 1-2450
SIP,11.6x7.5mm-40℃~+85℃ 10.2mm 11.6mm 1A 2200uF 300uA 50mVp-p 5V 7.5mm 7V~36V 850kHz 94% Short Circuit Protection、Automatic fault recovery ±1% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesTEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorised74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, Multiplexers
README
README.mdA digital polysynth based on the teensy 4.1
Code heavily adapted from Albert Nyström's 6-voice teensy synth: https://github.com/albnys/TeensyPoly6
I'll write up the new features and improvements at some point but I promise it's dead good
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R6, R8, R10, R12 |
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R7, R9, R11 |
| 5 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, H5 |
| 4 | 74HC4051 | Package_DIP:DIP-16_W7.62mm | U2, U3, U4, U6 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1uF | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm | U5 |
| 1 | BCLK3.6 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP5 |
| 1 | BCLK4.1 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP6 |
| 1 | DIN3.6 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | DIN4.1 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP4 |
| 1 | LED1 | LED_THT:LED_D5.0mm_FlatTop | D3 |
| 1 | LED2 | LED_THT:LED_D5.0mm_FlatTop | D4 |
| 1 | LED3 | LED_THT:LED_D5.0mm_FlatTop | D5 |
| 1 | LED4 | LED_THT:LED_D5.0mm_FlatTop | D6 |
| 1 | LED5 | LED_THT:LED_D5.0mm_FlatTop | D7 |
| 1 | LFOShape | footprints:miniToggle | SW9 |
| 1 | LFOdest | footprints:miniToggle | SW8 |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U8 |
| 1 | Teensy4.1 | footprints:Teensy41 | U9 |
| 1 | WCLK3.6 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | WCLK4.1 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | aVolPot | footprints:alphaPot_Centred | RV17 |
| 1 | attPot | footprints:alphaPot_Centred | RV25 |
| 1 | bTunePot | footprints:alphaPot_Centred | RV13 |
| 1 | bVolPot | footprints:alphaPot_Centred | RV18 |
| 1 | bendPot | footprints:alphaPot_Centred | RV11 |
| 1 | cTunePot | footprints:alphaPot_Centred | RV14 |
| 1 | cVolPot | footprints:alphaPot_Centred | RV19 |
| 1 | cWaveKnob | footprints:R0904N_newholes | RV12 |
| 1 | decPot | footprints:alphaPot_Centred | RV26 |
| 1 | dlyMixKnob | footprints:R0904N_newholes | RV7 |
| 1 | dlyTimeKnob | footprints:R0904N_newholes | RV6 |
| 1 | fAttknob | footprints:R0904N_newholes | RV22 |
| 1 | fReleaseKnob | footprints:R0904N_newholes | RV23 |
| 1 | filterEnvAmtPot | footprints:alphaPot_Centred | RV24 |
| 1 | filterFpot | footprints:alphaPot_Centred | RV20 |
| 1 | filterMode | footprints:miniToggle | SW7 |
| 1 | filterResPot | footprints:alphaPot_Centred | RV21 |
| 1 | lfoAAttKnob | footprints:R0904N_newholes | RV31 |
| 1 | lfoADecKnob | footprints:R0904N_newholes | RV30 |
| 1 | lfoADepthPot | footprints:alphaPot_Centred | RV28 |
| 1 | lfoAFreqPot | footprints:alphaPot_Centred | RV29 |
| 1 | lfoBDepthKnob | footprints:R0904N_newholes | RV9 |
| 1 | lfoBRateKnob | footprints:R0904N_newholes | RV8 |
| 1 | lineOutHeader | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J1 |
| 1 | mainOctave | footprints:miniToggle | SW4 |
| 1 | midiHeader | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J3 |
| 1 | modKnob | footprints:R0904N_newholes | RV15 |
| 1 | octB | footprints:miniToggle | SW5 |
| 1 | octC | footprints:miniToggle | SW6 |
| 1 | powerHeader | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | presetKnob | footprints:R0904N_newholes | RV3 |
| 1 | reset | footprints:pushButtonEuro | SW10 |
| 1 | revMixKnob | footprints:R0904N_newholes | RV4 |
| 1 | revSizeKnob | footprints:R0904N_newholes | RV5 |
| 1 | save | footprints:pushButtonEuro | SW11 |
| 1 | shapeA | footprints:miniToggle | SW2 |
| 1 | shapeB | footprints:miniToggle | SW3 |
| 1 | subVolPot | footprints:alphaPot_Centred | RV16 |
| 1 | susPot | footprints:alphaPot_Centred | RV27 |
| 1 | volPot | footprints:alphaPot_Centred | RV10 |
| 1 | ~ | footprints:1334ABreakout | U7 |
Similar boards
- 2 layers

- 2 layers117.9 × 75.7 mm

Drone Launcher
TorBorve/Drone-Launcher
This folder contains all the Schematics and PCB designs for the drone launcher. KiCAD has been used to make these. Please download it to view these files.
36 parts - 2 layers94 × 74.2 mm

- 4 layers113 × 54 mm

A3motion mainboard v01
a3-audio/a3-motion
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.
24 parts1 - 4 layers72.4 × 95.3 mm

DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers51.6 × 26.8 mm

MHI AC CTRL
hberntsen/mhi-ac-ctrl-esp32
Control MHI Airconditioning locally using your own ESP32 series chip!
8 parts74MIT - 2 layers65 × 74 mm

- 2 layers127 × 54.3 mm

Questions
How big is the TeensySynth41 PCB?
It measures 355.6 × 97.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TeensySynth41 use?
86 parts, built around the TSR 1-2450, TEENSY 4.1 and 74HC4051. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TeensySynth41 KiCad files?
From the ajharvie/TeensyPolySynth repository on GitHub, at the commit this page was made from: the board is boards/TeensySynth41.kicad_pcb and its schematic boards/TeensySynth41.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TeensySynth41 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ajharvie before reusing the design.