2 layers96.6 × 82.8 mm
2 layers61 × 27.3 mm
TASK PCB
AHMEDKHAN10/TASK-PCB- Size
- 61 × 27.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 42
- Pads
- 56
- Tracks, vias
- 77, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 May 2019
- Updated
- 28 May 2019
Overview
TASK PCB is an open-source printed circuit board by AHMEDKHAN10, from the AHMEDKHAN10/TASK-PCB repository on GitHub. It is a 2-layer board of 61 × 27.3 mm with 7 parts on 42 nets, routed with 77 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 resistors, 2 diodes, 1 IC and 1 connector.
Main components
1README
README.mdTASK-PCB
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | 2K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_1.00mm:PinHeader_2x20_P1.00mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | Temperature |
| 1 | HCSR-04 | OptoDevice:Kingbright_KRC011_Vertical | U1 |
| 1 | LED1 | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | LED2 | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
Questions
How big is the TASK PCB PCB?
It measures 61 × 27.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TASK PCB use?
7 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TASK PCB KiCad files?
From the AHMEDKHAN10/TASK-PCB repository on GitHub, at the commit this page was made from: the board is project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TASK PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask AHMEDKHAN10 before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5