Skip to the content
2 layers65.3 × 77.1 mmMas dimas, the printed circuit board in 3D

Projek Matakuliah Mikrokontroller

Size
65.3 × 77.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
33
Pads
57
Tracks, vias
60, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Apr 2025
Updated
18 Jun 2025

Overview

Mas dimas is an open-source printed circuit board by Ahmadnaufall, from the Ahmadnaufall/AquaSmart repository on GitHub. It is a 2-layer board of 65.3 × 77.1 mm with 9 parts on 33 nets, routed with 60 tracks and 0 vias.

It is built around the ARDUINO UNO R3. Its parts include 2 connectors, 1 resistor, 1 diode and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

AquaSmart Preview

🌊 AquaSmart

Deskripsi Proyek

AquaSmart adalah sistem otomatisasi berbasis Arduino Uno untuk pemberian pakan ikan dan monitoring kualitas air melalui pengukuran pH. Proyek ini bertujuan untuk mempermudah pemeliharaan akuarium atau kolam kecil dengan fitur kontrol pintar otomatis

🧠 ANGGOTA TEAM

NAMANRPJOBDESK
Dhimas Fajar Kurniawan2123600032UI/UX Designer
Muhammad Nakhwa Zain2123600046Programmer
Ahmad Naufal Saifuddin2123600050Project Manager
Muhammad Jauhar Tsalis A.2123600051Hardware Specialist
Nur Cahyani2123600052Nonteknis
Ramatya Rimba Hamdhani21236000563D Designer

🛠️ Fitur utama:

🚿 Monitoring pH air secara real-time

🐟 Pemberian pakan otomatis berbasis timer

📱 Peringatan otomatis ke pengguna saat pH air berada di luar batas normal

🔄 Kontrol manual pemberian pakan (menggunakan push button)

🛠️ Komponen Perangkat Keras

KomponenFungsi
Arduino UnoOtak dari sistem
Sensor pH AirMengukur keasaman air
Motor ServoMengontrol pemberian pakan
LED & LCDIndikator Perintah dijalankan
Breadboard & JumperPerakitan prototipe
Power SupplyMenyediakan daya bagi sistem

📱 Tampilan Dashboard

Gauge untuk monitoring nilai pH

Notifikasi otomatis ketika pH tidak normaal

Indikasi untuk pemberian pakan manual (berjalannya perintah)

Timer untuk menunjukkan berapa waktu pemberian makan otomatis selanjutnya

📈 Alur Sistem

Arduino membaca data sensor pH secara berkala.

Data dikirim via UART ke Perangkat (web)

Blynk menampilkan nilai pH pada dashboard.

Jika pH >7 sistem mengirim notifikasi peringatan dan tampilan peringatan di LCD dan menyalanya Buzzer.

Timer internal memicu pemberian pakan secara otomatis.

Pengguna juga dapat memicu pemberian pakan manual melalui push button.

📊 MIND MAP BLOK DIAGRAM DAN FLOWCHART

MIND MAP

AquaSmart Preview

BLOK DIAGRAM

AquaSmart Preview

FLOWCHART

AquaSmart Preview

DESIGN FIGMA

AquaSmart Preview

Parts

9
QtyValueFootprintReferences
1Arduino_UNO_R3Module:Arduino_UNO_R3A1
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BUZZER1
1Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2
1Conn_01x06_SocketConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_HorizontalPH4502
1LCDConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_HorizontalJ1
1LEDLED_THT:LED_D1.8mm_W3.3mm_H2.4mmD1
1Motor_ServoConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalM1
1RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_HorizontalR1
1SW_PushConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalSW1

Similar boards

  • 2 layers68.8 × 53.6 mmRelatively Universal ROM Programmer, the printed circuit board in 3D

    Relatively Universal ROM Programmer

    AndersBNielsen/Relatively-Universal-ROM-Programmer

    Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

    149 parts257GPL-3.0
  • 2 layers69.1 × 53.8 mmMotor controller, the printed circuit board in 3D

    Motor controller

    AlanFord/self-balancing-stick

    Dual Axis Reaction Wheel Inverted Pendulum

    25 parts79MIT
  • 2 layers68.6 × 53.3 mmProtogasm Board V2, the printed circuit board in 3D

    Protogasm Board V2

    Edging-Machines/Edging-Machines

    This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

    14 parts67MIT
  • 2 layers53.8 × 69.6 mmEVSE V2 2, the printed circuit board in 3D

    EVSE V2 2

    PedroCNeves/AC_ChargingStation

    A learning project to create an EV AC Charging station based on an Arduino Uno

    32 parts50
  • 2 layers113.7 × 61 mmArduTester SMD, the printed circuit board in 3D

    ArduTester SMD

    jonsag/arduTester

    An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4

    17 parts14
  • 4 layers65.9 × 52.9 mmMotor shield, the printed circuit board in 3D

    Motor shield

    DCC-EX/EX-MotorShield8874

    Design files for the open source 5A Motor Shield

    114 parts12
  • 4 layers68.6 × 53.3 mm101 PCB, the printed circuit board in 3D

    101 PCB

    ICRS/101

    The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.

    89 parts10CC-BY-4.0
  • 2 layers53.3 × 68.3 mmAnac 2040, the printed circuit board in 3D

    Anac 2040

    rallekralle11/Anna2040

    RP2040-based board in the shape of the Arduino uno

    63 parts9

Questions

How big is the Mas dimas PCB?

It measures 65.3 × 77.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mas dimas use?

9 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mas dimas KiCad files?

From the Ahmadnaufall/AquaSmart repository on GitHub, at the commit this page was made from: the board is Rangkaian/Schematic/mas dimas.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mas dimas design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ahmadnaufall before reusing the design.