

JVC Camera Remote Protocol
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 29
- Pads
- 101
- Tracks, vias
- 223, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Mar 2019
- Updated
- 8 Mar 2020
Overview
Jvc is an open-source printed circuit board by ags-tubs, from the ags-tubs/jvc-remote repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 34 parts on 29 nets, routed with 223 tracks and 0 vias.
It is built around the ATTINY2313-20SU, MAX485ED and BC847. Its parts include 11 resistors, 7 capacitors, 4 diodes, 4 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY2313-20SU
SOIC-20-300mil-40℃~+85℃ 128Byte 128Byte 18 2.7V~5.5V 20MHz 2KB 8 Bit AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdJVC Remote
Usage
For interactive use inkvoke the script like this:
python3 -i listen.py
then you can call functions as follows:
>>>initCam()
>>>sendCmd("Autoiris", 0)
>>>sendKey("Iris", 127)
Pinout
26pin_studio_10pin_remote_6pin_tally.xls
Es wird nur der Remote Anschluß benötigt.
Der Stecker ist ein gewönlicher 6pin Mini-Din (der PS/2 Stecker) Anschluß.
Zum Beispiel: http://www.reichelt.de/SE-DIO-M06/3/index.html?&ACTION=3&LA=446&ARTICLE=17457&artnr=SE-DIO+M06
Protokoll
Signallevel: 3.3V
Format: 9600baud 1E8 (8 daten, 1 stop-bit, even-parity)
Protocol Flow
Typical Sequence
| Normal CCU to CAM flow | ||||
|---|---|---|---|---|
| Direction (seen from OCP) | TX | RX | TX | RX |
| length (in Byte) | 1 | 1 | 3-4 | 1 |
| Purpose | Startbyte | ACK | Data | ACK |
which seems to be requested by a special char (0x90)
Startbyte
| Startbyte | ||||||||
|---|---|---|---|---|---|---|---|---|
| Bit | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Purpose | Transmission Start | 0 | Special | data | ||||
If Special bit is set: data is the payload for the request this transmission was requested with. (see 3 byte data bitflags)
Speculative interpretation of ACK byte:
| ACK byte | ||||||||
|---|---|---|---|---|---|---|---|---|
| Bit | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Funktion | ACK | UNIMPL | ACK | UNIMPL | 0 | UNIMPL | 0 | |
0xA0 => transmission understood, everything OK
0xF2 => transmission understood, but Feature not implemented
Data bytes:
4 Byte:
| Daten | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Byte | 0 | 1 | 2 | 3 | ||||||||||||||||||||||||||||
| Bit | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Purpose | key | 0 | value | checksum | ||||||||||||||||||||||||||||
3 Byte:
| Data | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Byte | 0 | 1 | 2 | |||||||||||||||||||||
| Bit | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Purpose | Command | Bitflags | Set Value | Checksum | ||||||||||||||||||||
Bitflags[2] = apply setting
Bitflags[1] = request special transmission
Features
This table was taken from cmds.csv wich was made by capturing the init sequence of CCU and CAM.
With this handshake all available/unavailable Features should be negotiated.
cmd type
cmd => 3 byte
key => 4 byte
setting
hex value for a specific setting (topic)
must be treated differently for key and cmd
value
value to be set for the setting
bitfield
currently we are thinking these bits represet specific flags
applies only to 3 byte commands; also see the section about 3 byte data
cam response
Response byte sent by the Camera,
tells if the requested feature is available in the specific model.
The following table was created by listening to communication with a JVC GM-HY251
//TODO: camera model?
topic
human readable representation of the setting-id
for example cmd setting 0x07 is understood as gain control
value-representation
human readable representation of the values a setting can have.
such as ON, OFF, incremental values, specific operation modes, ...
| cmd type | setting | value | bitfield | cam response | topic | value-representation |
|---|---|---|---|---|---|---|
| cmd | 0x00 | 0x0 | 0b0100 | IMPL | Colorbars | |
| cmd | 0x01 | 0x0 | 0b0100 | IMPL | Detail | |
| cmd | 0x02 | 0x0 | 0b0100 | IMPL | Autoiris | |
| cmd | 0x02 | 0x1 | 0b0100 | IMPL | Autoiris | |
| cmd | 0x03 | 0x0 | 0b0100 | IMPL | White Bal | Manual |
| cmd | 0x03 | 0x1 | 0b0100 | IMPL | White Bal | Preset |
| cmd | 0x03 | 0x2 | 0b0100 | IMPL | White Bal | A |
| cmd | 0x03 | 0x3 | 0b0100 | IMPL | White Bal | B |
| cmd | 0x03 | 0xf | 0b0100 | IMPL | White Bal | full auto |
| cmd | 0x06 | 0x0 | 0b0110 | UNIPLM | Auto White | |
| cmd | 0x06 | 0x1 | 0b0110 | IMPL | Auto White | |
| cmd | 0x07 | 0x0 | 0b0100 | IMPL | Gain | 0dB |
| cmd | 0x07 | 0x1 | 0b0100 | IMPL | Gain | 6dB |
| cmd | 0x07 | 0x2 | 0b0100 | IMPL | Gain | 9dB |
| cmd | 0x07 | 0x3 | 0b0100 | IMPL | Gain | 12dB |
| cmd | 0x07 | 0x4 | 0b0100 | IMPL | Gain | 18dB |
| cmd | 0x07 | 0x5 | 0b0100 | UNIPLM | Gain | |
| cmd | 0x07 | 0x6 | 0b0100 | UNIPLM | Gain | |
| cmd | 0x07 | 0x8 | 0b0100 | IMPL | Gain | |
| cmd | 0x07 | 0x8 | 0b0100 | IMPL | Gain | ALC |
| cmd | 0x07 | 0xa | 0b0100 | IMPL | Gain | 3dB |
| cmd | 0x07 | 0xe | 0b0100 | UNIPLM | Gain | |
| cmd | 0x08 | 0x0 | 0b0100 | IMPL | Tally PGM | |
| cmd | 0x08 | 0x1 | 0b0100 | IMPL | Tally PGM | |
| cmd | 0x09 | 0x0 | 0b0100 | IMPL | Call | |
| cmd | 0x09 | 0x1 | 0b0100 | IMPL | Call | |
| cmd | 0x0b | 0x0 | 0b0110 | UNIPLM | ||
| cmd | 0x0c | 0x0 | 0b0100 | IMPL | Shutter | off |
| cmd | 0x0c | 0x1 | 0b0100 | UNIPLM | Shutter | |
| cmd | 0x0c | 0x2 | 0b0100 | IMPL | Shutter | 1/120 |
| cmd | 0x0c | 0x3 | 0b0100 | IMPL | Shutter | 1/250 |
| cmd | 0x0c | 0x4 | 0b0100 | IMPL | Shutter | 1/500 |
| cmd | 0x0c | 0x5 | 0b0100 | IMPL | Shutter | 1/1000 |
| cmd | 0x0c | 0x6 | 0b0100 | IMPL | Shutter | 1/2000 |
| cmd | 0x0c | 0xf | 0b0100 | UNIPLM | Shutter | |
| cmd | 0x0f | 0x0 | 0b0100 | IMPL | Black Toe | unmod |
| cmd | 0x0f | 0x1 | 0b0100 | IMPL | Black Toe | stretch |
| cmd | 0x0f | 0x2 | 0b0100 | IMPL | Black Toe | compress |
| cmd | 0x1b | 0x0 | 0b0100 | UNIPLM | ||
| cmd | 0x1b | 0x1 | 0b0100 | UNIPLM | ||
| cmd | 0x1c | 0x0 | 0b0100 | IMPL | Auto Knee | |
| cmd | 0x1d | 0x0 | 0b0100 | IMPL | Gamma | |
| cmd | 0x1d | 0x1 | 0b0100 | IMPL | Gamma | |
| cmd | 0x1d | 0x2 | 0b0100 | IMPL | Gamma | |
| cmd | 0x1d | 0x3 | 0b0100 | IMPL | Gamma | |
| cmd | 0x1d | 0x4 | 0b0100 | IMPL | Gamma | |
| cmd | 0x47 | 0x0 | 0b0100 | IMPL | GENLOCK SC | 0 |
| cmd | 0x47 | 0x1 | 0b0100 | IMPL | GENLOCK SC | 90 |
| cmd | 0x47 | 0x2 | 0b0100 | IMPL | GENLOCK SC | 180 |
| cmd | 0x47 | 0x3 | 0b0100 | IMPL | GENLOCK SC | 270 |
| cmd | 0x4a | 0x0 | 0b0100 | IMPL | DNR | |
| cmd | 0x4b | 0x0 | 0b0100 | UNIPLM | ||
| cmd | 0x4b | 0x1 | 0b0100 | UNIPLM | ||
| cmd | 0x4b | 0x2 | 0b0100 | UNIPLM | ||
| cmd | 0x4b | 0xf | 0b0100 | UNIPLM | ||
| cmd | 0x4c | 0x0 | 0b0100 | IMPL | ||
| cmd | 0x4c | 0x1 | 0b0100 | IMPL | ||
| cmd | 0x4c | 0x2 | 0b0100 | IMPL | ||
| cmd | 0x4c | 0xf | 0b0100 | UNIPLM | ||
| cmd | 0x4d | 0x0 | 0b0100 | IMPL | Skin Detail | |
| cmd | 0x4e | 0x1 | 0b0100 | UNIPLM | ||
| cmd | 0x4f | 0x0 | 0b0100 | UNIPLM | ||
| cmd | 0x4f | 0x1 | 0b0100 | UNIPLM | ||
| cmd | 0x4f | 0x2 | 0b0100 | UNIPLM | ||
| cmd | 0x50 | 0x1 | 0b0100 | IMPL | Full Auto Shooting | |
| cmd | 0x51 | 0x0 | 0b0100 | UNIPLM | ||
| cmd | 0x51 | 0x1 | 0b0100 | UNIPLM | ||
| cmd | 0x52 | 0x0 | 0b0100 | IMPL | ||
| cmd | 0x53 | 0x0 | 0b0100 | IMPL | Tally PVW | |
| cmd | 0x53 | 0x1 | 0b0100 | IMPL | Tally PVW | |
| cmd | 0x7c | 0x1 | 0b0100 | IMPL | ||
| cmd | 0x7d | 0x1 | 0b0100 | IMPL | ||
| key | 0x00 | 0x340 | IMPL | Iris | ||
| key | 0x02 | IMPL | Gain R | |||
| key | 0x03 | IMPL | Gain B | |||
| key | 0x06 | IMPL | Master Black | |||
| key | 0x12 | 0x530 | UNIPLM | |||
| key | 0x14 | 0x400 | IMPL | |||
| key | 0x16 | 0x400 | IMPL | |||
| key | 0x26 | 0x328 | IMPL | Red | ||
| key | 0x26 | 0x404 | IMPL | Red | ||
| key | 0x27 | 0x230 | IMPL | Blue | ||
| key | 0x27 | 0x41c | IMPL | Blue | ||
| key | 0x32 | 0x604 | IMPL | |||
| key | 0x36 | 0x114 | IMPL | Gamma Master | ||
| key | 0x37 | 0x114 | IMPL | Gamma G | ||
| key | 0x40 | 0x340 | IMPL | Autoiris | ||
| key | 0x56 | 0x26e | UNIPLM | |||
| key | 0x74 | 0x801 | UNIPLM | |||
| key | 0xb4 | 0x801 | UNIPLM | Genlock H Phase 1 | ||
| key | 0xb5 | 0x801 | UNIPLM | Genlock H Phase 2 | ||
| key | 0xf2 | 0x008 | UNIPLM | |||
| key | 0xf2 | 0x00c | UNIPLM | |||
| key | 0xf2 | 0x80c | UNIPLM | |||
| key | 0xf3 | 0x00c | UNIPLM | |||
| key | 0xf3 | 0xf7c | UNIPLM |
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C3, C6, C7 |
| 2 | 0R | Resistor_SMD:R_1206_3216Metric | R10, R11 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 1k8 | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 3v6 | Diode_SMD:D_MELF-RM10_Universal_Handsoldering | D3, D4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 100µF | Capacitor_SMD:CP_Elec_10x10.5 | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 120r | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 560 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | ATtiny2313-20SU | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U3 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | Crystal | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | MAX485E | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
The 31 most common of 34 parts.
More from ags-tubs/jvc-remote
1- 2 layers

Similar boards
- 2 layers100 × 71 mm

Welding controler
RZ3DDD/Spot_Welding_Controler
Development of a PCB for Spot_Welding_Controler
38 parts2 - 2 layers99 × 57.5 mm

Clock
dunkelstern/NightClock
Small SMD based night clock with RTC and battery/supercap backup
42 parts1BSD-3-Clause - 2 layers

Test project with uC
DeshmukhMalhar/sch2header
Scripts to auto-generate pin defination header from schematics
5 parts - 2 layers29.6 × 49.3 mm

Flashmultiplexer
pruttelherrie/Ehx9-All
Modifications for the Electro Harmonix '9' line of pedals.
19 parts23 - 2 layers100 × 50 mm

Mains timer
reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad
37 parts1 - 2 layers29.5 × 41.5 mm

- 2 layers68.6 × 53.3 mm

- 2 layers93.4 × 87.4 mm

Questions
What parts does the Jvc use?
34 parts, built around the ATTINY2313-20SU, MAX485ED and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jvc KiCad files?
From the ags-tubs/jvc-remote repository on GitHub, at the commit this page was made from: the board is cam-to-rs485-avr/board/jvc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jvc design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).