

Welding controler
Development of a PCB for Spot_Welding_Controler
- Size
- 100 × 71 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 31
- Pads
- 174
- Tracks, vias
- 302, 23
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Sep 2017
- Updated
- 16 Nov 2017
Overview
Welding controler is an open-source printed circuit board by RZ3DDD, from the RZ3DDD/Spot_Welding_Controler repository on GitHub. It is a 2-layer board of 100 × 71 mm with 38 parts on 31 nets, routed with 302 tracks and 23 vias.
It is built around the ATTINY2313-20SU and PN2222A. Its parts include 11 resistors, 8 capacitors, 7 connectors, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY2313-20SU
SOIC-20-300mil-40℃~+85℃ 128Byte 128Byte 18 2.7V~5.5V 20MHz 2KB 8 Bit AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole_3.2mm_M3_Pad_Via | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | REF01, REF02, REF03, REF04, REF05, REF06, REF07, REF08 |
| 5 | 10k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R10, R11 |
| 3 | 100n | Capacitors_THT:C_Disc_D10.0mm_W2.5mm_P5.00mm | C3, C7, C8 |
| 3 | Conn_01x02_Male | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | J3, J4, J6 |
| 2 | 10n | Capacitors_THT:C_Disc_D10.0mm_W2.5mm_P5.00mm | C5, C6 |
| 2 | 120 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R8 |
| 2 | 220 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5 |
| 1 | 12k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7 |
| 1 | 22pF | Capacitors_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C4 |
| 1 | 22pF | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 47u | Capacitors_THT:CP_Radial_Tantal_D5.5mm_P2.50mm | C1 |
| 1 | 8,0 MHz | Crystals:Resonator-2pin_w10.0mm_h5.0mm | Y1 |
| 1 | 82 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | ATTINY2313-20SU | Housings_SOIC:SOIC-20W_7.5x12.8mm_Pitch1.27mm | U1 |
| 1 | AVR-ISP-10 | Connectors_Multicomp:Multicomp_MC9A12-1034_2x05x2.54mm_Straight | CON1 |
| 1 | Conn_01x04_Male | Connectors_JST:JST_VH_B4P-VH-B_4x3.96mm_Vertical | J1 |
| 1 | Conn_01x04_Male | Connectors_Molex:Molex_KK-6410-04_04x2.54mm_Straight | J5 |
| 1 | Conn_02x04_Odd_Even | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | J2 |
| 1 | PN2222A | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q1 |
| 1 | Rotary_Encoder_Switch | Encoders:Rotary_Encoder_EN12 | SW1 |
Similar boards
- 2 layers

- 2 layers99 × 57.5 mm

Clock
dunkelstern/NightClock
Small SMD based night clock with RTC and battery/supercap backup
42 parts1BSD-3-Clause - 2 layers

Test project with uC
DeshmukhMalhar/sch2header
Scripts to auto-generate pin defination header from schematics
5 parts - 2 layers29.6 × 49.3 mm

Flashmultiplexer
pruttelherrie/Ehx9-All
Modifications for the Electro Harmonix '9' line of pedals.
19 parts23 - 2 layers100 × 50 mm

Mains timer
reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad
37 parts1 - 2 layers29.5 × 41.5 mm

- 2 layers152.4 × 101.6 mm

8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0 - 2 layers33.7 × 66 mm

Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0
Questions
How big is the Welding controler PCB?
It measures 100 × 71 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Welding controler use?
38 parts, built around the ATTINY2313-20SU and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Welding controler KiCad files?
From the RZ3DDD/Spot_Welding_Controler repository on GitHub, at the commit this page was made from: the board is welding_controler.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Welding controler design in my own project?
Its repository states no licence, so its author keeps all rights: ask RZ3DDD before reusing the design.