2 layers38.1 × 20.3 mm
2 layers38.1 × 20.3 mm
Sensor ntc
Agilack/pmod10This repository holds multiple PMOD modules projects
- Size
- 38.1 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 14
- Pads
- 28
- Tracks, vias
- 48, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Jun 2017
- Updated
- 4 Sep 2019
Overview
Sensor ntc is an open-source printed circuit board by Agilack, from the Agilack/pmod repository on GitHub. It is a 2-layer board of 38.1 × 20.3 mm with 8 parts on 14 nets, routed with 48 tracks and 3 vias.
It is built around the MAX6682MUA. Its parts include 2 capacitors, 2 connectors, 1 resistor and 1 IC. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdPMOD modules
This repository contains multiple projects of PMOD modules. All of them are used for communications.
CAN
This module is a peripheral interface to connect a CAN bus.
RS232
This module is a RS232 interface. The PMOD side is a type4a interface and the other side is a DB9 male connector. The module contains a level shifter (basically a MAX3232) to allow interfacing RS232 signal levels on a board with TTL levels.
RS485
Midi (IN)
This module can be used to connect a MIDI device to a board with PMOD interface. The MIDI port is an input, so only instruments that send datas can be connected (tested with a keyboard)
USB Serial
This module is an usb-serial adapter (PMOD peripheral). Based on a Silicon Labs chip, no specific driver is required to use it on most OS.
Wifi
This module is a Wifi interface (PMOD peripheral). Based on the very popular espressif chip (ESP8285 or ESP8266)
License
All electronics parts are released under Creative Commons Attribution Share Alike 3.0 license.
All firmwares and softwares included with modules are realeased under GNU General Public Licence v3 (GNU GPLv3)
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | sensor-ntc:SMD0603 | C2 |
| 1 | 1uF | sensor-ntc:SMD0805 | C1 |
| 1 | 450px | sensor-ntc:logo-agilack-11.5 | agilack-11.5 |
| 1 | CONN_2 | sensor-ntc:CONN_MC000034 | P2 |
| 1 | MAX6682 | sensor-ntc:MSOP8 | U1 |
| 1 | PMOD | sensor-ntc:CONN_PMOD-Male | P1 |
| 1 | R | sensor-ntc:SMD0805 | R1 |
| 1 | VAL** | sensor-ntc:Logo-ohw | ohw_logo |
Questions
How big is the Sensor ntc PCB?
It measures 38.1 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor ntc use?
8 parts, built around the MAX6682MUA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor ntc KiCad files?
From the Agilack/pmod repository on GitHub, at the commit this page was made from: the board is sensor-ntc/prj-kicad/sensor-ntc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor ntc design in my own project?
Its repository states no licence, so its author keeps all rights: ask Agilack before reusing the design.
More from Agilack/pmod
9- 2 layers50.8 × 20.3 mm
- 2 layers38.1 × 20.3 mm
- 4 layers38.1 × 20.3 mm
- 2 layers50.8 × 21 mm
- 2 layers50.8 × 20.3 mm
- 2 layers38.1 × 20.3 mm
- 2 layers50.8 × 20.3 mm
- 2 layers50.8 × 20.3 mm
Similar boards
- 2 layers20.5 × 24.8 mm
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0