

Tamagotchi thing
Just a dumb attempt to make a tamagotch.
- Size
- 42.5 × 47 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 105
- Pads
- 328
- Tracks, vias
- 708, 268
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Jul 2025
- Updated
- 6 Aug 2025
Overview
Tamagotchi thing is an open-source printed circuit board by afonsus1997, from the afonsus1997/Tamagotchi-thing repository on GitHub. It is a 4-layer board of 42.5 × 47 mm with 90 parts on 105 nets, routed with 708 tracks and 268 vias.
It is built around the TPS63802DLAR, DW01A and TP4057, with the USBLC6-2P6, AO3401A and BSS138 among its other parts. Its parts include 35 resistors, 23 capacitors, 6 connectors, 5 ICs and 4 transistors. It belongs with the STM32 boards of this library.
Main components
7TPS63802DLAR
VSON-10(2x3)-40℃~+125℃@(TJ) 1 1.3V~5.5V 1.4MHz、1.6MHz、2.1MHz 1.8V~5.2V 11uA 2A Adjustable Buck-Boost Buck-Boost Built-in Yes VSON-10(2x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersDW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementTP4057
SOT-23-6-40℃~+85℃ 1 25uA 4.24V 4V~6.5V Charging IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSTECH PUBLICBattery ManagementUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdTamagotchi Thing
Just a dumb attempt to make a tamagotch.
Based on the amazing work of jcrona!
Credits
3D models:
- Kailh buttons by Manh Le
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100k | Resistor_SMD:R_0402_1005Metric | R6, R7, R11, R15, R16, R17, R18, R19, R22, R28, R32, R33 |
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C15, C19, C20, C21, C24, C28 |
| 5 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C7, C9, C10, C11, C12 |
| 4 | 330 | Resistor_SMD:R_0402_1005Metric | R12, R21, R27, R31 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6 |
| 3 | SW_Push | TamagotchiThing:Kailh_mouse_button | SW2, SW4, SW5 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R20, R34 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R25, R35 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C25, C27 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R26, R36 |
| 2 | 4.7k | Capacitor_SMD:C_0402_1005Metric | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J7, J8 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123F | D1, D2 |
| 1 | 0.47uH | Inductor_SMD_Wurth:L_Wurth_WE-LQSH-2010 | L2 |
| 1 | 1.6k | Resistor_SMD:R_0402_1005Metric | R42 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C23 |
| 1 | 15 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R39 |
| 1 | 32768Hz - 12,5 pF | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 390k | Capacitor_SMD:C_0402_1005Metric | R10 |
| 1 | 39nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 511k | Resistor_SMD:R_0402_1005Metric | R37 |
| 1 | 91k | Resistor_SMD:R_0402_1005Metric | R38 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Battery | TamagotchiThing:Battery_Pads_4x4 | BT1 |
| 1 | Conn_01x14 | Resistor_SMD:R_1210_3225Metric | J1 |
| 1 | Conn_01x30 | TamagotchiThing:sh1106-1.3inch-oled_1 | J5 |
| 1 | Conn_01x30 | TamagotchiThing:FFC-SMD_12P-P0.50_FH34SRJ-12S-0.5SH | J3 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | FS8205A | Package_TO_SOT_SMD:SOT-23-6 | Q5 |
| 1 | LED_Dual_KKA | TamagotchiThing:LED-SMD_4P-L1.6-W1.5-TL-1 | D3 |
| 1 | STM32L073RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_SPDT_321 | TamagotchiThing:SW-SMD_SK-3245S-L1-A-1 | SW6 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Speaker_Crystal | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | LS1 |
| 1 | TP4057 | Package_TO_SOT_SMD:TSOT-23-6 | U5 |
| 1 | TPS63802DLAR | TamagotchiThing:VREG_TPS63802DLAR | U4 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J6 |
The 86 most common of 90 parts.
Similar boards
- 2 layers50.2 × 95.2 mm

- 8 layers50 × 50 mm

- 2 layers95 × 67.5 mm

- 2 layers107 × 64 mm

- 4 layers61 × 26 mm

- 4 layers48.5 × 25 mm

- 4 layers45 × 32.5 mm

FlashKa panel
DomPka/LuxLibre
Pick a light · Compare · Web apps · Firmware · Design your own · Build a FlashKa · Repository map · Help
143 partsGPL-3.0 - 2 layers5 × 99.7 mm

Questions
How big is the Tamagotchi thing PCB?
It measures 42.5 × 47 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Tamagotchi thing use?
90 parts, built around the TPS63802DLAR, DW01A, TP4057 and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tamagotchi thing KiCad files?
From the afonsus1997/Tamagotchi-thing repository on GitHub, at the commit this page was made from: the board is Hardware/Tamagotchi-thing/Tamagotchi-thing.kicad_pcb and its schematic Hardware/Tamagotchi-thing/Tamagotchi-thing.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tamagotchi thing design in my own project?
Its repository states no licence, so its author keeps all rights: ask afonsus1997 before reusing the design.