

Yet Another Nixie Clock Processing
- Size
- 59.7 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 87
- Pads
- 306
- Tracks, vias
- 705, 176
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Oct 2025
- Updated
- 16 Dec 2025
Overview
Yet Another Nixie Clock Processing is an open-source printed circuit board by afonsus1997, from the afonsus1997/Yet-Another-Nixie-Clock repository on GitHub, published under the MIT licence. It is a 4-layer board of 59.7 × 70 mm with 66 parts on 87 nets, routed with 705 tracks and 176 vias.
It is built around the ESP32-WROOM-32, DS3231MZ+ and USBLC6-2P6, with the MMBT2222A and PJ-002BH among its other parts. Its parts include 19 capacitors, 19 resistors, 6 ICs, 5 diodes and 5 connectors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
5ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesDS3231MZ+
SOIC-8-40℃~+85℃ 2.3V~5.5V I2C Temperature compensation、Backup power management and battery charging、Alarm function、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)MMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)PJ-002BH
插件-25℃~+85℃ 2.5mm 24V 5A 6.5mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSCUIDC Power Connectors
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C7, C12, C13, C14, C16, C19 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R7, R12, R13, R17 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C8 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R21 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D2, D4, D16, D17 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11 |
| 3 | SW_MEC_5E | Yet-Another-Nixie-Clock:SW_SKRPACE010 | SW1, SW2, SW3 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical_SMD | J10, J11 |
| 2 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H2, H3 |
| 1 | 1.5M | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 100nF | Capacitor_SMD:C_1210_3225Metric | C18 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W_HandSolder | C15 |
| 1 | 100uH / 2.5 A | Inductor_SMD:L_APV_APH0840 | L2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R20 |
| 1 | 22uH | Inductor_SMD:L_APV_APH0615 | L1 |
| 1 | 33.2k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 4.7uF | Capacitor_SMD:C_Elec_8x10.2 | C17 |
| 1 | 50m | Resistor_SMD:R_1206_3216Metric | R19 |
| 1 | 5k | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV1 |
| 1 | Battery_Cell | Yet-Another-Nixie-Clock-Face:BAT-TH_CR2032-BS-6-1 | BT1 |
| 1 | CP2102N-Axx-xQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U4 |
| 1 | D_Small | Diode_SMD:D_SMB_Handsoldering | D3 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U5 |
| 1 | JTAG | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | MAX1771xSA | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | PJ-002BH | Yet-Another-Nixie-Clock:CUI_PJ-002BH | J1 |
| 1 | Q_NMOS | Package_TO_SOT_SMD:TO-263-2 | Q3 |
| 1 | TPS563200 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J2 |
More from afonsus1997/Yet-Another-Nixie-Clock
1- 2 layers200 × 70 mm

Similar boards
- 2 layers64.8 × 50.5 mm

- 2 layers188 × 145.4 mm

- 6 layers92.6 × 69.4 mm

Usb hub 2
yedidia-sisay/usb3-multiport-hub
An open-source USB 3.2 Gen 2 (10 Gbps) multiport hub & docking station.
230 parts - 2 layers60 × 60 mm

- 2 layers

- 2 layers98.1 × 99.7 mm

- 2 layers200 × 101 mm

Atmega32
talonghtn-rgb/MachATmega32
Đây là dự án thiết kế và chế tạo bo mạch học tập lập trình nhúng sử dụng vi điều khiển ATmega32, được xây dựng nhằm phục vụ việc học tập, thực hành và nghiên cứu các hệ thống nhúng.
168 parts - 2 layers40.6 × 82.6 mm

EDA
ARTS-Laboratory/SCUWLS
UAV Deployable Stage Height Sensor with Electro-permanent Magnet Docking Mechanism
36 parts3CC-BY-SA-4.0
Questions
How big is the Yet Another Nixie Clock Processing PCB?
It measures 59.7 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Yet Another Nixie Clock Processing use?
66 parts, built around the ESP32-WROOM-32, DS3231MZ+, USBLC6-2P6 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Yet Another Nixie Clock Processing KiCad files?
From the afonsus1997/Yet-Another-Nixie-Clock repository on GitHub, at the commit this page was made from: the board is Hardware/Yet-Another-Nixie-Clock-Processing/Yet-Another-Nixie-Clock-Processing.kicad_pcb and its schematic Hardware/Yet-Another-Nixie-Clock-Face/Yet-Another-Nixie-Clock-Face.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Yet Another Nixie Clock Processing design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).