AeroElectronics/Open-Source-Electron-Microscopy7This is not the first or last attempt at making open source electron microscopy a reality. Many others have attempted this large and difficult task before with varying specialties and contributions.
Opa548 revised is an open-source printed circuit board by AeroElectronics, from the AeroElectronics/Open-Source-Electron-Microscopy repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 86.5 × 65.6 mm with 60 parts on 49 nets, routed with 397 tracks and 69 vias.
It is built around the OPA1612AID. Its parts include 23 resistors, 11 capacitors, 5 ICs and 3 connectors.
This is not the first or last attempt at making open source electron microscopy a reality. Many others have attempted this large and difficult task before with varying specialties and contributions. I have learned a great deal from other's work in this area and it is my hope that I can make a contribution too. It is through the collective effort and ability of the open source community that progress on such large and difficult tasks may be realized.
My work so far has focused on the control electronics which can be used to drive electron microscopes. This is an essential first step that can (mostly) preceed the design of the electron optics. I'm hoping that by lowering the barrier to entry, others can work on this exciting task.
Note to readers! This repo is quite new, many of the currently uploaded works are my most recent iterations (old designs have not been uploaded) and have not yet been tested. Please check the
I've worked on a few areas, see the links below:
Resistor/Inductor Substitution board
Remember, this project is still under development. Use at your own risk. This work is licenced under CERN OHL V2 S. Please see license file.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP3, JP4, JP5, JP6, JP22, JP23 |
| 6 | 5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R9, R10, R11 |
| 5 | C_ps | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C5, C10 |
| 5 | R_Potentiometer_US | Potentiometer_SMD:Potentiometer_Bourns_3269P_Horizontal | RV1, RV2, RV3, RV4, RV5 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R22, R23 |
| 4 | C_Polarized | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C6, C7, C8, C9 |
| 3 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP20, JP21 |
| 2 | 1200pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C11 |
| 2 | Conn_Coaxial_Small | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J1, J5 |
| 2 | R_offset_high | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R16 |
| 2 | R_offset_low | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R17 |
| 2 | TestPoint | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP1, TP2 |
| 2 | optional | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13 |
| 2 | ~ | Library:opa548 | U1, U6 |
| 1 | Conn_01x06_Socket | Connector_Phoenix_MC:PhoenixContact_MC_1,5_6-GF-3.81_1x06_P3.81mm_Horizontal_ThreadedFlange_MountHole | J2 |
| 1 | Current_sum1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | Current_sum2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | INA253 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | Ilim_high | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | Ilim_low | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | Input_sum1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | Input_sum2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | L78L05_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | OPA1612AID | Library:opa1612 | U3 |
| 1 | Shunt | my_local_lib:TO-263-2_TabPin1 | R8 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP24 |
It measures 86.5 × 65.6 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the OPA1612AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AeroElectronics/Open-Source-Electron-Microscopy repository on GitHub, at the commit this page was made from: the board is DeflectionCoilDrivers/opa548_revised/opa548_revised.kicad_pcb and its schematic Backplane/backplane/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
AeroElectronics/Open-Source-Electron-Microscopy
This is not the first or last attempt at making open source electron microscopy a reality. Many others have attempted this large and difficult task before with varying specialties and contributions.
AeroElectronics/Open-Source-Electron-Microscopy
This is not the first or last attempt at making open source electron microscopy a reality. Many others have attempted this large and difficult task before with varying specialties and contributions.
AeroElectronics/Open-Source-Electron-Microscopy
This is not the first or last attempt at making open source electron microscopy a reality. Many others have attempted this large and difficult task before with varying specialties and contributions.
AeroElectronics/Open-Source-Electron-Microscopy
This is not the first or last attempt at making open source electron microscopy a reality. Many others have attempted this large and difficult task before with varying specialties and contributions.
Floyd-Fish/Noise-Amplifier
An ultra-low noise amplifier to measure low-noise LDO/OPA's wide band output noise, and many other interesting measurements. Referred to AN-159.
courtcourtaney/voxEMG
VoxEMG circuit and schematics, plus example code for further digital filtering with Bela, etc.
arthurbenemann/OPA_PHONO
Phono amplifier for MM cartridges, base on TI's OPA lineup
Jeffrey-McCormick/CPTR480-ENGR357_Quadrature_SDR
Quadrature sampling software defined radio for digital signal processing. Project for Embedded and Real Time Systems (CPTR480) and Engineering Electronics II (ENGR357).
stefantquach/steDAC
Open source audio DAC project based on the ES9038Q2M DAC from ESS. Still WIP
AxelMcKenna/AFX-1000
RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.
KLFAMO/relock_Artiq
This project is an electronic device based on the STM32 microcontroller, equipped with an Ethernet port for remote control and data communication.
pasdesignal-zz/rPI_audio_board
a rPi daughter board for audio io and midi
