4 layers65 × 56.1 mm
2 layers100 × 80 mm
SteDAC
stefantquach/steDAC2Open source audio DAC project based on the ES9038Q2M DAC from ESS. Still WIP
- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 164
- Nets
- 155
- Pads
- 547
- Tracks, vias
- 988, 112
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Jan 2022
- Updated
- 11 Nov 2022
Overview
SteDAC is an open-source printed circuit board by stefantquach, from the stefantquach/steDAC repository on GitHub. It is a 2-layer board of 100 × 80 mm with 164 parts on 155 nets, routed with 988 tracks and 112 vias.
It is built around the ATSAMS70N20A-AN, OPA1612AID and ES9038Q2M, with the NCP161ASN330T1G-HXY, ADP7182ACPZN-R7 and MAX38902AATA+T among its other parts. Its parts include 79 capacitors, 36 resistors, 13 ICs, 5 connectors and 2 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
10
ATSAMS70N20A-AN
LQFP-100LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
OPA1612AID
SOIC-8-2.25V~18V -40℃~+85℃ 0.000015% 2 Pairs Differential Inputs 2-Channel 3.6mA ESD protection SOIC-8 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers
ES9038Q2M
QFN-30-EP(3x5)1.8V~3.3V 2 32 I2C Power-down mode、Programmable gain、Soft reset QFN-30-EP(3x5) Digital to Analog Converters (DAC) ROHSESS TechDigital To Analog Converters (DAC)
NCP161ASN330T1G-HXY
SOT-23-5L-40℃~+85℃ 1 120mV@(100mA) 3.3V 500mA 60dB@(100Hz) 6V Enable SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ADP7182ACPZN-R7
LFCSP-6-UD(2x2)-40℃~+125℃@(Tj) 1 185mV@(200mA) 18uVrms 200mA 28V 650uA 66dB@(10kHz) Adjustable Negative Over Current Protection、Over Temperature Protection、Enable LFCSP-6-UD(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMAX38902AATA+T
TDFN-8-EP(2x2)-40℃~+125℃@(Ta) 1 100mV@(500mA) 12uVrms 365uA 5.5V 500mA 600mV~5.3V 70dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Soft Start Positive TDFN-8-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxim Integrated (Analog Devices)Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMAX889SESA+
SOIC-8-40℃~+85℃ -5.5V~-2.5V 12mA 1MHz 2.7V~5.5V 200mA 50mΩ Inverted SOIC-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge PumpsSTX-3120-5B-284C
-Audio Connectors (Headphones)KyconSIT8209AI-21-33S-100.000000X
SMD3225-4P-40℃~+85℃ 100MHz 3.3V 36mA LVCMOS、LVTTL ±20ppm SMD3225-4P Programmable Oscillators ROHSSiTimeProgrammable Oscillators
USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdSteDAC
Open source audio DAC project based on the ES9038Q2M DAC from ESS. Still WIP
Credits
Logo art by @yumightaswell (Instagram)
Parts
164| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C32, C33, C43, C49, C54, C55 +12 |
| 13 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C38, C39, C40, C41, C50, C51, C52, C53, C62, C65, C73, C75 |
| 9 | 0R | SamacSys_Parts:BEADC2012X110N | FB2, FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10 |
| 8 | 0.22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C20, C21, C22, C23, C36, C37 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R28, R29, R32, R37, R38 |
| 6 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C44, C45, C46, C47, C69, C74 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C42, C48, C64, C66, C79 |
| 5 | NCP161ASN330T1G | SamacSys_Parts:SOT95P280X145-5N | IC4, IC5, IC6, IC7, IC11 |
| 4 | 1.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R17, R18, R19 |
| 4 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C24, C25, C63 |
| 4 | 2n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30, C31, C34, C35 |
| 4 | 352 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24, R26, R27 |
| 4 | 510p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C26, C27, C28, C29 |
| 4 | 750 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21, R22, R25 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H2, H3, H4, H5 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R30, R36 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP8, JP9, JP10 |
| 3 | jumper | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP5, JP6, JP7 |
| 2 | 12p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C61, C80 |
| 2 | 4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35 |
| 2 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R15 |
| 2 | DNP | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2, JP4 |
| 2 | OPA1612 | SamacSys_Parts:SOIC127P600X175-8N | U2, U3 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C68 |
| 1 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 12MHz | SamacSys_Parts:ABM3B | Y3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 2.2u | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C71 |
| 1 | 24k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R33 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 5.62k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F2 |
| 1 | 82400102 | SamacSys_Parts:SOT95P280X145-6N | D3 |
| 1 | ADP7182ACPZN-R7 | SamacSys_Parts:SON65P200X200X65-7N-D | IC10 |
| 1 | ATSAMS70N20A-AN | SamacSys_Parts:QFP50P1600X1600X160-100N | IC3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | ES9038Q2M | SamacSys_Parts:QFN40P300X500X80-31N-D | IC2 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LOGO | logo:logo | G*** |
| 1 | LOGO | logo:crisis_boi | G*** |
| 1 | MAX38902AATA+T | SamacSys_Parts:SON50P200X200X80-9N-D | IC9 |
| 1 | MAX889SESA+ | SamacSys_Parts:SOIC127P600X175-8N | IC8 |
| 1 | OPA1622 | SamacSys_Parts:SON50P300X300X100-11N | U4 |
| 1 | STX-3120-5B-284C | SamacSys_Parts:STX31205B284C | J7 |
| 1 | SiT8209AI-21-33S-100.000000X | SamacSys_Parts:SiT8209AI2133S100000000X | Y2 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | USB4105-GF-A | Type-C:HRO-TYPE-C-31-M-12-HandSoldering | J2 |
The 163 most common of 164 parts.
Questions
How big is the SteDAC PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SteDAC use?
164 parts, built around the ATSAMS70N20A-AN, OPA1612AID, ES9038Q2M and NCP161ASN330T1G-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SteDAC KiCad files?
From the stefantquach/steDAC repository on GitHub, at the commit this page was made from: the board is KiCAD/steDAC.kicad_pcb and its schematic KiCAD/AK4493_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SteDAC design in my own project?
Its repository states no licence, so its author keeps all rights: ask stefantquach before reusing the design.
Similar boards
- 6 layers54 × 29 mm
- 4 layers
- 2 layers55.6 × 54.8 mm
Signal Generator
Jmanicom/ELAB-Signal-Generator
A square wave generator with adjustable frequency, gain, and offset control. Designed as a part of UBC's ELAB PCB design course.
72 partsCERN-OHL-S-2.0 - 6 layers122.5 × 103.5 mm
- 4 layers90.6 × 58.1 mm
EcoApi pcb
EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...
179 parts4GPL-3.0 - 4 layers40 × 40 mm
- 2 layers90 × 96 mm
Bloo
Maahi-V/26-27-UCI-Kit-Micromouse
Kit Mouse Schematic and Layout for the 2026-27 Micromouse IEEE program
95 parts