2 layers82 × 74 mm
2 layers100 × 100 mm
Sensor board
adriansv15/PCBsPCB developed by me
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 39
- Pads
- 134
- Tracks, vias
- 259, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Nov 2025
- Updated
- 17 Nov 2025
Overview
Sensor board is an open-source printed circuit board by adriansv15, from the adriansv15/PCBs repository on GitHub. It is a 2-layer board of 100 × 100 mm with 42 parts on 39 nets, routed with 259 tracks and 16 vias.
It is built around the L298N. Its parts include 16 diodes, 4 capacitors and 4 resistors. It belongs with the sensors and measurement boards of this library.
Main components
1Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1N4936 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 6 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | PFOut1, Pulse1, Temp1, Temp2, Temp3, Temp4 |
| 4 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4 |
| 4 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | DC1, DC2, DC3, DC4 |
| 4 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 3 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | Fingerprint1, Temp_Out1, Vin1 |
| 3 | Conn_01x06 | Connector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | HX1, MDIO1, MDIO2 |
| 2 | L298N | Package_TO_SOT_THT:TO-220-15_P2.54x5.08mm_StaggerOdd_Lead4.58mm_Vertical | MD1, MD2 |
More from adriansv15/PCBs
2- 2 layers82 × 74 mm
Similar boards
- 2 layers76.1 × 85 mm
- 4 layers85 × 54 mm
PECDR
pedro-ibs/trekking
Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”
68 parts9 - 2 layers66.3 × 34.3 mm
C64PSUv3
FabioNMI/C64PSU
A low-cost, lightweight and very reliable power supply for the Commodore 64
37 parts2 - 2 layers
RoboForce
Khuzhin06/RoboForce
Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.
3 parts2 - 2 layers
- 2 layers127 × 117.5 mm
Diy ert
CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.
44 parts1MIT - 2 layers99.5 × 99.5 mm
SchematicKiCadProyect
dduarteCE/Robot-vacuum
Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.
42 parts1MIT - 2 layers62.3 × 42.9 mm
Questions
How big is the Sensor board PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor board use?
42 parts, built around the L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor board KiCad files?
From the adriansv15/PCBs repository on GitHub, at the commit this page was made from: the board is sensor_board2/sensor_board.kicad_pcb and its schematic sensor_board/sensor_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor board design in my own project?
Its repository states no licence, so its author keeps all rights: ask adriansv15 before reusing the design.