2 layers96.6 × 82.8 mm
2 layers15 × 19.5 mm
Electronic
adnksharp/piSide6-dht-graphMedir temperatura y humedad del ambiente usando sensores de temperatura DHT, Arduino y Python
- Size
- 15 × 19.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 4
- Pads
- 9
- Tracks, vias
- 7, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Dec 2024
- Updated
- 10 Dec 2024
Overview
Electronic is an open-source printed circuit board by adnksharp, from the adnksharp/piSide6-dht-graph repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 15 × 19.5 mm with 4 parts on 4 nets, routed with 7 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 connectors, 1 resistor and 1 IC. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdRead temperature and humidity with DHT sensors
Medir temperatura y humedad del ambiente usando sensores de temperatura DHT, Arduino y Python
Requisitos
En arduino
Instalar FirmataExpress
En arduino-cli
arduino lib install --git-url https://github.com/MrYsLab/FirmataExpress.gitEs necesario tener activa la opción
enable_unsafe_installdel archivo de configuración de Arduino-cli
Cargar el proyecto de FirmataExpress a la placa de Arduino
Librerías de Python
- PySide6
- matplotlib
- pymata4
pip install -r requirements.txtHardware usado
 |  |
|---|
- Placa de Arduino MEGA 2560
- Sensor DHT11
Características
- Mostrar la humedad (%) y la temperatura en (°C y °F) dentro de labels.
- Graficar la temperatura.
En proceso
[!TIP]
Graficar la humedad.
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | D2 | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J2 |
| 1 | DHT11 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | U1 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
Questions
How big is the Electronic PCB?
It measures 15 × 19.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Electronic use?
4 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Electronic KiCad files?
From the adnksharp/piSide6-dht-graph repository on GitHub, at the commit this page was made from: the board is electronic/electronic.kicad_pcb and its schematic electronic/electronic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Electronic design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5