2 layers98 × 68 mm
2 layers96 × 58 mm
Receiver
AdmondDeng/remoteremote controller using blue pill + nrf24l01
- Size
- 96 × 58 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 47
- Pads
- 113
- Tracks, vias
- 188, 20
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Jun 2024
- Updated
- 30 Jun 2024
Overview
Receiver is an open-source printed circuit board by AdmondDeng, from the AdmondDeng/remote repository on GitHub. It is a 2-layer board of 96 × 58 mm with 19 parts on 47 nets, routed with 188 tracks and 20 vias.
It is built around the NRF24L01P-R. Its parts include 8 connectors, 5 ICs, 3 resistors and 1 switch.
Main components
1Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 3S Battery | Resistor_SMD:R_2816_7142Metric_Pad3.20x4.45mm_HandSolder | BT1 |
| 1 | 40K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | BP | deng:blue_pill | U4 |
| 1 | Buzzer | deng:buzzer | BZ1 |
| 1 | CH1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | CH2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | CH3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | CH4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | CH5 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | CH6 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | CH7 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | CH8 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | MINI560 | deng:mini560 | U1 |
| 1 | nRF24L01+ | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | U6 |
| 1 | power switch | Resistor_SMD:R_2816_7142Metric_Pad3.20x4.45mm_HandSolder | SW1 |
| 1 | voltage convert 2 | deng:3v_5v_converter | U7 |
| 1 | voltage converter 1 | deng:3v_5v_converter | U5 |
Questions
How big is the Receiver PCB?
It measures 96 × 58 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Receiver use?
19 parts, built around the NRF24L01P-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Receiver KiCad files?
From the AdmondDeng/remote repository on GitHub, at the commit this page was made from: the board is Hw_Receiver/receiver/receiver.kicad_pcb and its schematic Hw_Receiver/receiver/receiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Receiver design in my own project?
Its repository states no licence, so its author keeps all rights: ask AdmondDeng before reusing the design.
More from AdmondDeng/remote
1Similar boards
- 2 layers
- 4 layers40 × 50 mm
- 4 layers61.8 × 27.5 mm
Audio Processing HW V1.0
aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.
83 parts4GPL-3.0 - 2 layers40.6 × 78.5 mm
Brooklyn
ARTS-Laboratory/DOVE
DOVE: Dynamics Observation and Vibration at the Edge. A deployable sensor package for vibration-based structural health monitoring.
39 parts4CC-BY-SA-4.0 - 2 layers50 × 90 mm
Pods
desertkun/pods
Compact game console on STM32F103RC6 chip with network module NRF24L01 and SH1106 display designed to be made as a pair.
32 parts4 - 2 layers21.6 × 48.3 mm
RF Arduino Pro Mini
etimou/Arduino-RF-Pro-Mini
Arduino Pro Mini + nRF24L01P = Arduino-RF-Pro-Mini
43 parts4 - 2 layers75.9 × 72.4 mm
OpenDTU
plewka/ESP-Solar_OpenDTU
PCB for OpenDTU in Cable Branchbox, LineSupply w. Fuses, RS485/RS232-Olimex, Relais, DS2485 OneWire, I2C-Header...
46 parts4GPL-3.0 - 4 layers62 × 60 mm
