2 layers58.4 × 109.2 mm ТКП-1.41.A-1, the printed circuit board in 3D

ТКП-1.41.A-1

-ТТКРЧПДЛ-

Size: 58.4 × 109.2 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 60
Nets: 30
Pads: 162
Tracks, vias: 358, 6
Pours: 10
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 28 Jun 2020
Updated: 19 Oct 2026

Overview

ТКП-1.41.A-1 is an open-source printed circuit board by Adept666, from the Adept666/stompboxes repository on GitHub. It is a 2-layer board of 58.4 × 109.2 mm with 60 parts on 30 nets, routed with 358 tracks and 6 vias.

It is built around the DC-005. Its parts include 9 resistors, 8 capacitors, 2 connectors, 1 diode and 1 crystal.

Main components

DC-005
UncategorisedUnknown maker

README

README.md

-ТТКРЧПДЛ- / Тут короче педали

Здесь хранятся схемы и чертежи гитарных педалек -ТТКРЧПДЛ- (штаб-квартира: Омск, Сибирь). Купить педальки и задать вопросы можно через группу ВКонтакте, Telegram-канал или Авито. Заценить звук можно на YouTube-канале. Поддержать можно с помощью Boosty. Проект катастрофически убыточен и за семь лет съел тонну моих личных средств.

Distortion + PCBs

Deep Blue Delay [REV3]

[REV3C]

Gerber

[C]

Schematic

F_Fab

[C] SM

Schematic

F_Fab

[REV3B]

Gerber

[B]

Schematic

F_Fab

B_Fab

[B] SM

Schematic

F_Fab

B_Fab

Distortion + [REV2]

Schematic

F_Fab

Gerber

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

Gerber

[A]

Schematic

F_Fab

[A] SM

Schematic

F_Fab

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1C] / Potentiometer Board [REV1B]

Schematic

F_Fab

Gerber (Main Board)

Gerber (Potentiometer Board)

Main Board [REV1B] / Potentiometer Board [REV1B]

Gerber (Potentiometer Board)

Good Grief Overdrive [REV1]

[REV1B]

Gerber

[B]

Schematic

F_Fab

[B] SM

Schematic

F_Fab

[REV1A]

Schematic

F_Fab

Gerber

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

Gerber

[B] Down-Tuned

Schematic

F_Fab

[B] Down-Tuned SM

Schematic

F_Fab

[B] Standard-Tuned

Schematic

F_Fab

[B] Standard-Tuned SM

Schematic

F_Fab

[REV1A]

Gerber

[A] Down-Tuned

Schematic

F_Fab

[A] Standard-Tuned

Schematic

F_Fab

Крыса [REV1]

Schematic

F_Fab

Gerber

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Работа с исходными файлами осуществляется в программе KiCad.

Для просмотра и редактирования принципиальных схем необходимо подключить следующие библиотеки символов:

KCL
SBKCL

Для работы с чертежами печатных узлов подключение библиотек не требуется, так как все использованные футпринты вшиты в файлы *.kicad_pcb. При необходимости футпринты могут быть найдены в библиотеках KCL и SBKCL.

Авторы

Основной разработчик: Igor Ivanov (Игорь Иванов).
Связь: adept.666.1993@gmail.com • Telegram • ВКонтакте • Google Scholar.

Репозиторий также содержит сторонние открытые изображения и шрифты, использованные при создании макетов рисунков, наносимых на корпуса педалей. Информация об авторах и лицензиях представлена в сопроводительных текстовых файлах, размещённых в соответствующих директориях.

Лицензии

Настоящий репозиторий использует раздельное лицензирование:

Основная часть файлов распространяется на условиях GNU General Public License v3.0 or later, если не указано иное.
Проекты печатных плат Clipper A и OCD распространяются на условиях CERN Open Hardware Licence Version 2 - Strongly Reciprocal.
Сторонние изображения и шрифты распространяются на условиях иных лицензий, указанных в соответствующих файлах.

Topics

stompboxes kicad

Project files

Show this board on your page

https://pcbkit.io/boards/Adept666/stompboxes/PCBS-PCAS/%D0%A2%D0%9A%D0%9F-3.45.A/%D0%A2%D0%9A%D0%9F-1.41.A-1/%D0%A2%D0%9A%D0%9F-1.41.A-1.kicad_pcb

The board's own page, for a message or a post.

Source

Repository: Adept666/stompboxes
Board file: PCBS-PCAS/ТКП-3.45.A/ТКП-1.41.A-1/ТКП-1.41.A-1.kicad_pcb
Commit: 9a9c1b3
Homepage: vk.com/stompboxes
Licence: Not stated

Parts

Qty	Value	Footprint	References
5	103	KCL-SM:R-SM-1206	PS.R2, PS.R3, R3, R6, R8
3	1.0	KCL-VIRTUAL:VFM-1.0-3.0-SL	VFM1, VFM2, VFM3
3	104	KCL-TH-ML:C-RECT-L07.3-W02.5-P05.08-d0.5	C2, C5, C8
2	104	KCL-SM:C-SM-1206	PS.C3, PS.C6
2	221	KCL-SM:C-SM-1206	C3, C6
2	7000	KCL-TH-ML:P-TO-92-S-G-D	VT1, VT2
2	PJ-644C	SBKCL-TH-ML:CON-PJ-644C-IN-OR-OUT	XS2, XS3
2	X	KCL-SM:R-SM-1206	J1, J2
2	X	KCL-TH-ML:VMH-STA-DA5	VMH1, VMH2
1	0540	SBKCL-TH-ML:P-SOD-123-OR-DO-41	PS.VD1
1	082	KCL-SM:P-SO-08	D1
1	102	KCL-SM:C-SM-1206	C4
1	105	KCL-TH-ML:C-RECT-L07.3-W04.5-P05.08-d0.5	C7
1	105	KCL-SM:R-SM-1206	R1
1	106 20V	KCL-SM:CP-CTSMD-C	PS.C4
1	106 25V	KCL-TH-ML:CP-RADIAL-D05.0-P02.0-CLS	PS.C5
1	106 35V	KCL-TH-ML:CP-RADIAL-D05.0-P02.0-CLS	PS.C2
1	106 35V	KCL-SM:CP-CTSMD-C	PS.C1
1	154	KCL-SM:R-SM-1206	R10
1	182	KCL-SM:R-SM-1206	IND.R1
1	183	KCL-SM:R-SM-1206	R5
1	222	KCL-SM:R-SM-1206	R2
1	223	KCL-SM:R-SM-1206	R11
1	223	KCL-TH-ML:C-RECT-L07.3-W02.5-P05.08-d0.5	C1
1	224	KCL-SM:R-SM-1206	R9
1	330	KCL-SM:R-SM-1206	PS.R1
1	333	KCL-SM:R-SM-1206	R12
1	393	KCL-SM:R-SM-1206	R7
1	474	KCL-SM:R-SM-1206	R4
1	5235	SBKCL-TH-ML:P-SOD-123-OR-DO-35-V2	IND.VD1
1	682	KCL-SM:R-SM-1206	IND.R2
1	A25K	SBKCL-TH-ML:RPB-18-1x17-1.6	RP2
1	A500K	SBKCL-TH-ML:RPB-18-1x17-1.6	RP3
1	B100K	SBKCL-TH-ML:RPB-18-1x17-1.6	RP1
1	BR-12.7	KCL-VIRTUAL:VLS-BR-P	VLS1
1	COM	KCL-TH-ML:CON-PAD-S-1.0-1.9	X1
1	COM	KCL-TH-ML:TP-4-1.0-1.9	TP1
1	DC-005	SBKCL-TH-ML:CON-DC-005-9V-OVAL	XS1
1	FYL-5013UWC	KCL-TH-ML:LED-ROUND-05.0-UNI-SH-SPACER	HL1
1	IN	KCL-TH-ML:TP-2-1.0-1.9	TP4
1	MTS-202-A2T	KCL-TH-ML:SW-MTS-202-A2T-2.5	SA1
1	OUT	KCL-TH-ML:TP-2-1.0-1.9	TP5
1	PBS-24-302SP	KCL-TH-ML:SW-PBS-24-302SP-2.5	SB1
1	V	KCL-TH-ML:TP-4-1.0-1.9	TP2
1	VREF	KCL-TH-ML:TP-3-1.0-1.9	TP3
1	Д9Б	KCL-TH-ML:P-Д-9	VD1

Similar boards

4 layers87.3 × 56.7 mm
CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
240 parts96MIT
2 layers149.9 × 55.9 mm
Pc amplifier
dilshan/arduino-mini-amp
Arduino based stereo audio amplifier system
140 parts67MIT
2 layers99.5 × 75.9 mm
Amp
hack-apollo/hack_amp
50W stereo power amplifier(TPA3116).
79 parts38GPL-3.0
4 layers76 × 100 mm
Chlorine revD
kanengomibako/Chlorine

206 parts11Unlicense
2 layers70 × 57 mm
VFD MQTT
Estylos/VFD-MQTT
Control of a VFD in MQTT with an ESP8266 and Discord.
42 parts2MIT
2 layers78.5 × 60.8 mm
Tachometer
PotatoX/Band_Saw_Conversion
Cheap benchtop wood cutting band saw -> decent metal cutting
64 parts1
2 layers30 × 50 mm
FAN PCB
alexgvg/FAN-PCB
Leiterkarte für FAN Stromverteilung
23 parts
2 layers84.1 × 55 mm
BME280 Project
carlozepeda-SJSU/Arduino-with-temperature-sensor
Designed and built a custom environmental monitoring system using an Arduino Uno R4 to track temperature, humidity, pressure, and power data in real time.
16 parts

Questions

How big is the ТКП-1.41.A-1 PCB?

It measures 58.4 × 109.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ТКП-1.41.A-1 use?

60 parts, built around the DC-005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ТКП-1.41.A-1 KiCad files?

From the Adept666/stompboxes repository on GitHub, at the commit this page was made from: the board is PCBS-PCAS/ТКП-3.45.A/ТКП-1.41.A-1/ТКП-1.41.A-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ТКП-1.41.A-1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Adept666 before reusing the design.

Overview

Main components

DC-005

README

-ТТКРЧПДЛ- / Тут короче педали

Big Muff [REV3]

Bass

Bass SM

NYC

NYC SM

Big Muff [REV2]

Bass

NYC

Crumbwave Multiplexer [REV1]

Deep Blue Delay [REV3]

[REV3C]

[C]

[C] SM

[REV3B]

[B]

[B] SM

Distortion + [REV2]

Edamamer [REV1]

Fishtaur [REV1]

[REV1A]

[A]

[A] SM

Fuzz Factory [REV1]

Main Board [REV1D] / Potentiometer Board [REV1C]

Main Board [REV1C] / Potentiometer Board [REV1B]

Main Board [REV1B] / Potentiometer Board [REV1B]

Good Grief Overdrive [REV1]

[REV1B]

[B]

[B] SM

[REV1A]

Great Depression Phaser [REV1]

Little Angel Chorus [REV1]

Salty Phaser [REV1]

Копка Земли [REV1]

[REV1B]

[B] Down-Tuned

[B] Down-Tuned SM

[B] Standard-Tuned

[B] Standard-Tuned SM

[REV1A]

[A] Down-Tuned

[A] Standard-Tuned

Крыса [REV1]

Тремоло Саши Огородникова [REV1]

[REV1B]

[REV1A]

Требования

Авторы

Лицензии

Parts

More from Adept666/stompboxes

Similar boards

Questions

How big is the ТКП-1.41.A-1 PCB?

What parts does the ТКП-1.41.A-1 use?

Where can I download the ТКП-1.41.A-1 KiCad files?

Can I use the ТКП-1.41.A-1 design in my own project?